Altec Lansing ATP3 троделни систем звучника

Увод

This manual provides detailed instructions for the setup, operation, and maintenance of your Altec Lansing ATP3 3-Piece Speaker System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The Altec Lansing ATP3 is a 3-piece computer speaker system designed to deliver quality audio. It consists of two satellite speakers and one subwoofer, providing a balanced sound experience for various applications.

Image: The Altec Lansing ATP3 3-Piece Speaker System, showcasing the two satellite speakers and the subwoofer unit.

Садржај пакета

Пре него што наставите са подешавањем, проверите да ли су све компоненте присутне у пакету:

1 x Altec Lansing ATP3 Subwoofer
2 x Altec Lansing ATP3 Satellite Speakers
1 x Audio Input Cable (3.5mm stereo jack)
1 к кабл за напајање

Altec Lansing ATP3 Speaker System Packaging

Image: The retail packaging for the Altec Lansing Multimedia 3 Piece Speaker System, indicating the product contents.

Упутства за подешавање

Пласман: Position the subwoofer on the floor or a sturdy surface near your computer. Place the two satellite speakers on your desk, equidistant from your listening position for optimal stereo imaging. Ensure the right satellite speaker is within easy reach as it houses the control knobs.
Повежите сателитске звучнике: Connect the cables from the two satellite speakers to the corresponding output ports on the back of the subwoofer. Ensure a secure connection for both left and right channels.
Повежите се са извором звука: Plug the 3.5mm audio input cable into the "Audio In" port on the subwoofer. Connect the other end of this cable to the audio output jack (typically green) on your computer or other audio device.
Прикључак за напајање: Connect the power cable to the subwoofer and then plug it into a standard electrical outlet.
Почетно укључивање: Turn the master volume knob on the right satellite speaker clockwise until you hear a click and the green indicator light illuminates. This indicates the system is powered on.

Altec Lansing ATP3 Speaker System Connections

Image: A visual representation of the Altec Lansing ATP3 system connected to an audio source (iPod), showing the subwoofer and satellite speaker connections.

Упутство за употребу

The primary controls for the ATP3 system are located on the right satellite speaker.

Контрола јачине звука: The largest knob controls the overall volume of the system. Rotate clockwise to increase volume, counter-clockwise to decrease.
Контрола баса: Adjust this knob to increase or decrease the low-frequency output (bass) from the subwoofer.
Контрола високих тонова: Use this knob to adjust the high-frequency output (treble) from the satellite speakers.
Индикатор напајања: A green LED on the right satellite speaker indicates that the system is powered on. To turn off the system, rotate the volume knob counter-clockwise until it clicks.

For optimal sound, start with the Bass and Treble controls at their mid-point and adjust to your preference. Ensure the volume on your audio source (computer, MP3 player) is also set to a reasonable level.

Одржавање

Proper maintenance ensures the longevity and performance of your speaker system.

Чишћење: Use a soft, dry cloth to wipe down the surfaces of the speakers and subwoofer. Avoid using liquid cleaners or abrasive materials, as these can damage the finish or internal components.
вентилација: Ensure the subwoofer's vents are not obstructed to prevent overheating.
Окружење: Keep the speakers away from direct sunlight, excessive heat, moisture, and dust.
Управљање кабловима: Avoid kinking or sharply bending the cables.

Решавање проблема

If you encounter issues with your Altec Lansing ATP3 speaker system, refer to the following common problems and solutions:

Проблем	Могући узрок	Решење
Нема звука	Систем није укључен. Каблови нису правилно повезани. Јачина звука извора звука је прениска или искључена. На рачунару је изабран погрешан аудио излаз.	Ensure the volume knob is turned on (green LED illuminated). Check all cable connections (power, satellite to subwoofer, audio input). Increase volume on the speakers and your audio source. Check if audio source is muted. Verify your computer's sound settings are configured to output audio through the correct device.
Изобличен или нејасан звук	Јачина звука је подешена превисоко. Bass/Treble settings are unbalanced. Сметње од других уређаја.	Смањите јачину звука и на звучницима и на извору звука. Adjust the Bass and Treble knobs to a balanced level. Move speakers away from other electronic devices that may cause interference.
Зујање или зујање	Сметње уземљивачке петље. Microphone/telephone functions on computer are active.	Try plugging the speakers into a different electrical outlet. In your computer's sound settings, mute or reduce the volume of microphone and telephone functions.

Спецификације

Феатуре	Детаљ
Број модела	АТП3
Спеакер Типе	3-Piece Computer Speaker System (2 Satellites, 1 Subwoofer)
RMS снага сателита	12 Watts per satellite
RMS снага сабвуфера	18 Ваттс
Субвоофер Дривер	6.5 инча
Сателлите Дриверс	Two 28mm microdrivers, one 3-inch midbass speaker per satellite
Повезивање	Жични (3.5 мм аудио улаз)
Контроле	Volume, Bass, Treble (on right satellite)
Боја	Црно
Материјал	Wood (subwoofer cabinet)
Тежина артикла	10 фунти

Гаранција и подршка

The Altec Lansing ATP3 3-Piece Speaker System comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Altec Lansing customer service. Refer to the official Altec Lansing webсајт за најновије контакт информације и ресурсе за подршку.

Молимо вас да сачувате доказ о куповини ради гаранције.