Intermatic ML88T 88-Watt Power Pack with Timer and Ground Shield Instruction Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic ML88T 88-Watt Power Pack with Timer and Ground Shield. This unit is designed to power 12-volt low voltage outdoor landscape lighting systems, offering automatic on/off functionality with a programmable timer and a manual override switch. Please read these instructions thoroughly before use to ensure safe and efficient operation.

2. Важне информације о безбедности

WARNING: RISK OF FIRE OR ELECTRIC SHOCK. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.

• This power pack is designed for КОРИШЋЕЊЕ САМО ВАЊСКО.
• Mount the unit more than 3 inches (10 feet) from the inside wall of a swimming pool, spa, or hot tub.
• Do not use this product with submersible luminaries or pumps.
• Do not connect to other power supplies in parallel.
• Не користити са затамњивачима.
• Уверите се да су све везе ожичења безбедне и правилно изоловане.
• Use only solid and stranded type wire rated under one screw terminal.
• Укупан ватtage of connected lighting must NOT EXCEED 88 WATTS.
• This unit features surge-resistant construction and is double insulated for safety.
• Увек искључите напајање пре него што извршите било какву инсталацију, одржавање или решавање проблема.

3. Подешавање и инсталација

3.1 Mounting the Power Pack

Select a suitable outdoor location for mounting the power pack. The location should be protected from direct heavy rain if possible, and adhere to the safety guidelines regarding proximity to water bodies.

• Mount the unit securely to a wall or post using appropriate hardware (not included).
• Ensure the unit is mounted vertically with the cord facing downwards to prevent water ingress.

3.2 Ожичење

The ML88T features screw terminals for connecting your low voltagе систем пејзажног осветљења.

Слика 1: Позади view of the ML88T Power Pack, highlighting the wiring terminals and important safety labels. The power cord exits from the bottom, and the low voltage output terminals are visible at the base.

1. Ensure the power pack is unplugged from the main power supply.
2. Open the terminal cover at the bottom of the unit.
3. Повежите ниску волtage wires from your landscape lighting system to the screw terminals. Use solid or stranded type wire.
4. Strip approximately 1/2 inch of insulation from the wire ends before inserting them into the terminals.
5. Tighten the screws firmly to ensure a secure connection.
6. Close the terminal cover.
7. Plug the power pack into a grounded outdoor electrical outlet.

4. Упутство за употребу

The ML88T features a mechanical timer for automatic operation and a manual ON/OFF override switch.

Слика 2: Фронт view of the ML88T Power Pack, displaying the mechanical timer dial with 24-hour markings and the manual ON/OFF override switch located above the dial.

4.1 Подешавање тренутног времена

1. Rotate the inner dial clockwise until the current time aligns with the 'TIME' arrow indicator. The dial is marked for 24 hours (12 AM to 12 PM).

4.2 Programming the Timer

The timer uses small, removable trippers to set the ON and OFF times. Two sets of trippers are included.

1. Insert the 'ON' tripper (typically red or a distinct color) into the desired ON time slot on the outer edge of the dial.
2. Insert the 'OFF' tripper (typically black or a distinct color) into the desired OFF time slot.
3. Ensure the trippers are securely seated in the dial. The timer will activate and deactivate the lighting system according to these settings.

4.3 Manual ON/OFF Override

A manual ON/OFF switch is located above the timer dial. This switch allows you to override the programmed timer settings.

• To turn the lights ON manually, push the switch to the 'ON' position.
• To turn the lights OFF manually, push the switch to the 'OFF' position.
• To return to programmed timer operation, set the switch to the 'TIMER' position (usually the center position).

5. Одржавање

Regular maintenance ensures the longevity and optimal performance of your power pack.

• Чишћење: Периодично обришите спољашњост уређаја средством за одлагањеamp cloth to remove dirt and debris. Do not use abrasive cleaners or immerse the unit in water.
• Провера везе: Annually inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or safety hazards.
• Провера животне средине: Ensure the unit remains free from obstructions and is not exposed to excessive moisture or extreme temperatures beyond its operating range.

КСНУМКС. Решавање проблема

6.1 Светла се не пале

• Проверите снагу: Ensure the power pack is securely plugged into a working electrical outlet.
• Ручно замена: Verify the manual ON/OFF switch is in the 'TIMER' or 'ON' position.
• Подешавање тајмера: Confirm the current time is set correctly and the ON tripper is in the desired position.
• Ожичење: Inspect the low voltage wiring connections at the power pack and to the lights for any loose or corroded wires.
• сијалице: Check if the landscape light bulbs are functional.
• Преоптерећење: Осигурајте укупан ватtage of connected lights does not exceed 88 watts. An overload can trip internal protection.

6.2 Timer Not Functioning

• Снага: Уверите се да уређај прима напајање.
• излетници: Ensure the ON and OFF trippers are correctly inserted and positioned on the dial.
• Ручно замена: Make sure the manual switch is in the 'TIMER' position.

6.3 Buzzing Sound

A slight humming or buzzing sound from the transformer is normal during operation. However, if the buzzing is excessively loud or accompanied by other issues (e.g., lights flickering, unit overheating), disconnect power immediately and contact customer support.

7. Спецификације

8. Гаранција и подршка

8.1 Информације о гаранцији

The Intermatic ML88T Power Pack is covered by a 5 година гаранције од датума куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

8.2 Корисничка подршка

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic webсајт или паковање производа за актуелне контакт информације.