Progress Lighting P5607-31 Traditional Outdoor Wall Lantern User Manual

1. Важне информације о безбедности

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање на прекидачу или кутији са осигурачима пре инсталације или сервисирања.
• Сви електрични прикључци морају бити у складу са локалним прописима, уредбама или Националним електричним кодексом (NEC). Консултујте квалификованог електричара ако нисте упознати са правилним електричним прикључцима.
• Користите само жичане конекторе са UL/cUL листом.
• This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning). Wash hands after handling.

2. Производ је готовview

The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.

Слика 2.1: Фронт view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.

Слика 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.

3. Подешавање и инсталација

3.1 Садржај пакета

Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.

3.2 Пре-инсталација

1. Turn off power at the main circuit breaker or fuse box.
2. Carefully unpack the fixture and components.

3.3 Монтажа уређаја

This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.

1. Причврстите држач за монтажу на разводну кутију користећи приложене завртње.
2. Ensure the bracket is level and securely fastened.

3.4 Електричне везе

Connect the fixture wires to the house wires according to the following:

• Спојите црну жицу из уређаја на црну (врућу) жицу из разводне кутије.
• Спојите белу жицу из уређаја на белу (неутралну) жицу из разводне кутије.
• Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
• Secure all connections with UL/cUL listed wire connectors.

3.5 Осигурање учвршћења

1. Пажљиво увуците све жице у разводну кутију.
2. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.

3.6 Bulb Installation

This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.

Слика 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.

1. Screw the bulb into the socket until snug. Do not overtighten.
2. This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.

3.7 Препоручено постављање

For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.

Слика 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.

Слика 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.

4. Операција

Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.

5. Одржавање

5.1 Чишћење

To clean the fixture, turn off the power and wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.

5.2 Замена сијалице

Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.

КСНУМКС. Решавање проблема

• Светло се не укључује:
  • Check that the power is turned on at the circuit breaker.
  • Ensure the bulb is securely screwed into the socket and is not burnt out.
  • Проверите да ли су сви електрични прикључци безбедни.
  • Inspect for any defective electrical components or wiring.
• Fuse blows or circuit breaker trips:
  • Check for crossed wires or short circuits.
  • Уверите се да је сијалица ватtage does not exceed the fixture's maximum rating (100W).

7. Спецификације

Слика 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.

8. Информације о гаранцији

Овај производ компаније Progress Lighting је покривен 1-годишња ограничена гаранција. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.

9. Подршка

For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official webсајту или на паковању производа.