BIG RED T92003B

BIG RED T92003B Torin Hydraulic Welded Bottle Jack Instruction Manual

Модел: Т92003Б

Увод

This manual provides essential instructions for the safe and effective use of your BIG RED T92003B Torin Hydraulic Welded Bottle Jack. This hydraulic bottle jack is designed for residential and commercial lifting applications, offering a 20-ton (40,000 lb) capacity. It features a robust welded construction, a high-quality glide-action pressure pump, and integrated safety mechanisms. Please read this manual thoroughly before operation to ensure proper usage and to prevent injury or damage.

Безбедносне информације

УПОЗОРЕЊЕ: Failure to heed these warnings may result in personal injury and/or property damage. Always prioritize safety when operating hydraulic lifting equipment.

  • Прочитајте и разумејте: Before operating, thoroughly read and understand all instructions and warnings provided in this manual and on the product labels.
  • Називни капацитет: Never exceed the rated capacity of 20 tons (40,000 lbs). Overloading can cause jack failure and severe injury.
  • Стабилна површина: Always use the jack on a hard, level surface capable of supporting the load.
  • Support the Load: After lifting, immediately support the vehicle or load with appropriate jack stands. Never work under a load supported only by the jack.
  • Правилно постављање: Position the jack saddle only on the vehicle or load's lifting points as specified by the manufacturer.
  • Одобрење: Ensure adequate clearance for lifting and lowering operations. Keep hands and feet clear of moving parts.
  • Особље: Do not get under or allow anyone under the vehicle until it has been properly supported by jack stands.
  • Прегледајте пре употребе: Always inspect the jack for damage or leaks prior to each use. Do not use if damaged or leaking.
  • Наменска употреба: This jack is designed for lifting vehicles, farm equipment, heavy-duty machinery, and industrial equipment. Do not use it for any other purpose.
  • Предлог 65 Упозорење: Овај производ вас може изложити хемикалијама за које је држава Калифорнија утврдила да изазивају рак и урођене мане или друге репродуктивне штете. За више информација посетите ввв.П65Варнингс.ца.гов.
BIG RED T92003B Torin Hydraulic Welded Bottle Jack with warning label
Figure 1: BIG RED T92003B Torin Hydraulic Welded Bottle Jack. Note the warning label on the side of the jack, emphasizing safety precautions.

Сетуп

  1. Распакивање и преглед: Carefully remove the jack from its packaging. Inspect for any visible damage or signs of hydraulic fluid leakage. Do not use if damaged.
  2. Bleeding the Hydraulic System: Before first use, or if the jack has been stored horizontally, it may be necessary to bleed air from the hydraulic system. To do this:
    • Open the release valve by turning it counter-clockwise approximately one full turn.
    • Уклоните чеп за пуњење уља.
    • Pump the handle several times to purge air.
    • Replace the oil filler plug and close the release valve by turning it clockwise until snug.
  3. Склоп ручке: Insert the two-piece handle into the handle socket on the jack. Ensure it is securely seated.

Упутство за употребу

Lifting a Load

  1. Ensure the load is stable and on a firm, level surface. Chock any wheels that will remain on the ground.
  2. Position the jack directly under the designated lifting point of the load. The saddle should be centered and make full contact.
  3. Close the release valve firmly by turning the handle clockwise until it is snug. Do not overtighten.
  4. Pump the handle up and down to raise the jack. The glide-action pressure pump is designed for minimal effort.
  5. Raise the load to the desired height. Do not exceed the maximum lifting height or the jack's capacity.
  6. Immediately place appropriately rated jack stands under the load at its designated support points.
  7. Slowly open the release valve to lower the load onto the jack stands.

Спуштање оптерећења

  1. Ensure the area around the load is clear of personnel and obstructions.
  2. If the load is on jack stands, slightly raise the load with the jack to remove pressure from the stands, then remove the jack stands.
  3. Slowly turn the release valve counter-clockwise to lower the load. Control the descent rate by adjusting how much the valve is opened.
  4. Once the load is fully lowered, remove the jack.
Close-up images of the bottle jack showing safety bypass valve, adjustable screw top, and leak-free welded cylinder
Figure 2: Key features of the bottle jack, including the safety bypass valve, adjustable screw top for varied lifting heights, and the leak-free welded cylinder design.

Одржавање

  • Хидраулично уље: The jack uses high-quality hydraulic oil for optimal performance. This oil offers corrosion resistance and maintains flexibility across a wide temperature range (40°F to 105°F). Check the oil level periodically and refill if necessary using only recommended hydraulic jack oil.
  • Чишћење: Keep the jack clean and free of dirt, grease, and debris. Wipe down the ram and pump mechanism after each use.
  • подмазивање: Periodically lubricate moving parts with light machine oil.
  • Складиштење: Store the jack in a dry, protected area with the ram fully retracted to prevent corrosion and extend seal life.
  • инспекција: Regularly inspect the jack for any signs of wear, damage, or leaks. Pay close attention to the piston ram and seals. The Y-style polyurethane sealing ring with a backup ring is designed to prevent slow load descent, but wear can occur over time.
Graphic illustrating special hydraulic oil properties and operating temperature range
Figure 3: Illustration of the special hydraulic oil's properties, including thermal stability, abrasion resistance, and biodegradability, along with its operating temperature range.

Решавање проблема

ПроблемМогући узрокРешење
Jack does not lift load or lifts slowly.Air in hydraulic system; Low oil level; Release valve not fully closed; Damaged seals.Bleed the hydraulic system (see Setup); Check and refill oil; Ensure release valve is fully closed; Contact service for seal replacement.
Load descends slowly or rapidly.Release valve not properly adjusted; Internal leak; Damaged seals.Adjust release valve carefully; Contact service for inspection and repair.
Цурење уља.Loose fittings; Damaged seals; Over-loosened release valve.Tighten fittings; Contact service for seal replacement; Ensure release valve is only opened enough to lower the load, do not unscrew excessively.
Jack handle does not pump.Low oil level; Air in system; Pump mechanism issue.Check and refill oil; Bleed the system; Contact service.

Спецификације

  • Модел: Т92003Б
  • Капацитет оптерећења: 20 тона (40,000 фунти)
  • Minimum Lifting Height: 9.44 инча
  • Максимална висина подизања: 17.75 инча
  • Димензије артикла (Д к Ш к В): 5.98 к 4.88 к 9.44 инча
  • Тежина артикла: 18 фунти
  • Боја: Црвени
  • Произвођач: Torin Shop Equipment
  • УПЦ: 615268920030
  • Безбедносни стандарди: Meets ASME PASE safety standards
Diagram showing the minimum and maximum height of the bottle jack
Figure 4: Dimensional diagram illustrating the minimum height (9.44 inches) and maximum height (17.63 inches) of the bottle jack, including the screw top extension.
Comparison table of different BIG RED bottle jack models and their specifications
Figure 5: A comparison table detailing specifications across various BIG RED bottle jack models, including capacity, weight, and height ranges.

Гаранција и подршка

This BIG RED T92003B Torin Hydraulic Welded Bottle Jack includes a limited 1-year manufacturer warranty. For warranty claims, technical support, or replacement parts, please contact Torin Shop Equipment directly. Refer to the product packaging or the manufacturer's official webсајт за актуелне контакт информације.