Упутство за употребу програмабилног термостата Hunter 44110 Set & Save 5+2

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 44110 Set & Save 5+2 Programmable Thermostat. Please read these instructions carefully before beginning installation or operation to ensure proper function and to avoid potential damage.

2. Безбедносне информације

• Увек искључите напајање система за грејање/хлађење на главној разводној табли са осигурачима или прекидачима пре инсталирања или сервисирања термостата.
• This thermostat is designed for indoor use only.
• Do not short out the terminals on the gas valve or at the system controller to test the thermostat. This can damage the thermostat and void your warranty.
• Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about any part of the installation, consult a qualified HVAC technician.
• Држите батерије ван домашаја деце. Ако се прогута, одмах потражите медицинску помоћ.

3. Садржај пакета

Проверите да ли ваш пакет садржи следеће ставке:

• Hunter 44110 Programmable Thermostat Unit
• Опрема за монтажу (шрафови и зидни типлови)
• Кориснички приручник (овај документ)

Напомена: За рад су потребне 2 АА батерије и нису укључене у пакет.

4. Инсталација и подешавање

4.1 Монтажа термостата

Choose a location for your thermostat that is away from drafts, direct sunlight, and heat sources. It should be mounted on an interior wall, approximately 1.5 meters (5 feet) above the floor.

1. Turn off power to your heating/cooling system at the main circuit breaker.
2. Уклоните стари термостат са зида.
3. Separate the front cover of the Hunter 44110 thermostat from its base.
4. Position the thermostat base against the wall and mark the mounting holes.
5. Избушите пробне рупе и по потреби уметните анкере у зид.
6. Secure the thermostat base to the wall using the provided screws.

4.2 Ожичење

The Hunter 44110 thermostat is compatible with most 24V heating and cooling systems. Refer to the wiring diagram provided with your specific HVAC system or consult a professional if you are unsure. Connect the wires from your system to the corresponding terminals on the thermostat base.

слика: Назад view of the Hunter 44110 thermostat, illustrating the wiring terminal block for connecting to your HVAC system.

4.3 Инсталација батерије

The thermostat requires two (2) AA alkaline batteries for operation. Install them into the battery compartment located on the back of the front cover, observing the correct polarity (+/-).

слика: Унутра view of the Hunter 44110 thermostat, showing the battery compartment with two AA batteries installed, alongside basic operational instructions printed on the unit.

Once batteries are installed and wiring is complete, reattach the front cover to the base. Turn the power back on at the main circuit breaker.

5. Упутство за употребу

слика: Фронт view of the Hunter 44110 programmable thermostat, displaying its LCD screen, 'F' (Function) button, and Up/Down arrow buttons for control.

5.1 Подешавање тренутног времена и дана

Refer to the full instructions at ввв.хунтерфан.цом for detailed steps on setting the current time and day. This is typically done by pressing a 'SET' or 'PROGRAM' button and using the Up/Down arrows to adjust values.

5.2 Programming the 5+2 Schedule

The 5+2 programming allows for separate schedules for weekdays (5 days) and weekends (2 days). This feature helps optimize energy usage.

1. Access the program mode (consult full instructions for specific button presses).
2. Set desired temperatures for up to four periods per day for weekdays.
3. Set desired temperatures for up to four periods per day for weekends.
4. Сачувајте програм.

5.3 Подешавање температуре

• То view the Set Temperature: Press the Up or Down arrow button for less than 1 second. The display will show the current set temperature.
• To change the Set Temperature: Press and hold the Up or Down arrow button until the display flashes. Then, press the Up or Down arrow button again to adjust the temperature to your desired setting.

5.4 System and Fan Modes

The thermostat features switches for selecting system and fan modes, typically located behind the front cover or on the side.

• Системски режими: HEAT, OFF, COOL. Select the appropriate mode for your desired operation.
• Режими вентилатора: AUTO, ON. In AUTO mode, the fan runs only when the heating or cooling system is active. In ON mode, the fan runs continuously.

5.5 Temporary Overrides

You can temporarily override the programmed schedule by manually adjusting the temperature. The thermostat will maintain this new temperature until the next programmed period begins, or until you cancel the override.

6. Одржавање

6.1 Замена батерије

The thermostat will display a battery logo when the batteries are low and need replacement. Replace with two (2) fresh AA alkaline batteries. Ensure correct polarity.

6.2 Filter Monitor Reset

Када