Behringer Ultragraph Pro FBQ6200 31-појасни стерео графички еквилајзер - упутство за употребу

1. Увод

The Behringer Ultragraph Pro FBQ6200 is a professional 31-band stereo graphic equalizer designed for both live sound reinforcement and studio recording applications. It features the revolutionary FBQ Feedback Detection System, dedicated limiters per channel, and a pink noise generator, providing comprehensive control over your audio environment.

This manual provides essential information for the safe and effective operation of your FBQ6200. Please read it thoroughly before connecting or operating the unit.

Слика 1: Предња страна view of the Behringer Ultragraph Pro FBQ6200, showing the 31 frequency sliders, FBQ LEDs, input/output meters, and various control buttons.

2. Важна безбедносна упутства

• Пажљиво прочитајте ова упутства.
• Сачувајте ова упутства за будућу употребу.
• Обратите пажњу на сва упозорења и пратите сва упутства.
• Не користите овај апарат у близини воде или влаге.
• Чистите само сувом крпом.
• Не блокирајте отворе за вентилацију. Инсталирајте у складу са упутствима произвођача.
• Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Немојте умањити безбедносну сврху поларизованог или уземљеног утикача. Поларизовани утикач има две оштрице од којих је једна шира од друге. Утикач са уземљењем има два ножа и трећи уземљени утикач. Широко сечиво или трећи зуб су обезбеђени за вашу безбедност. Ако испоручени утикач не стане у вашу утичницу, обратите се електричару за замену застареле утичнице.
• Заштитите кабл за напајање од гажења или прикљештења, посебно на утикачима, утичницама и на месту где излазе из уређаја.
• Користите само додатке/прибор које је навео произвођач.
• Искључите овај апарат из струје током олуја са грмљавином или када га не користите дуже време.
• Све сервисирање препустите квалификованом сервисном особљу. Сервисирање је потребно када је уређај оштећен на било који начин, као што је оштећен кабл за напајање или утикач, ако је течност проливена или су предмети упали у апарат, ако је апарат био изложен киши или влази, не ради нормално , или је одбачено.

3. Подешавање

3.1 Распакивање

Carefully unpack your FBQ6200. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. Retain the original packing materials for future shipping or storage.

3.2 Везе

The FBQ6200 offers flexible connectivity options. Ensure all audio equipment is powered off before making any connections.

• Аудио улази: Connect your audio source (e.g., mixer output) to the FBQ6200's inputs using balanced XLR or 1/4" TRS cables. The unit features two channels for stereo operation.
• Аудио излази: Connect the FBQ6200's outputs to your amplifier or next processing stage using balanced XLR or 1/4" TRS cables.
• Излаз субвоофера: A dedicated mono subwoofer output is provided for connecting to a powered subwoofer or subwoofer amplifier. This output features an adjustable crossover frequency.
• RCA конекције: While the primary connectors are XLR and 1/4" TRS, RCA adapters can be used for compatibility with RCA-equipped gear. Ensure proper grounding to avoid hum and noise.

3.3 Прикључак за напајање

Connect the supplied AC power cord to the FBQ6200's power inlet and then to a suitable AC power outlet. Ensure the voltage matches the unit's requirements. Always power on your equalizer after your mixer and before your power amplifiers. Power off in the reverse order.

4. Operating the FBQ6200

The FBQ6200 offers a range of controls for precise audio shaping and system protection.

4.1 Front Panel Controls Overview

• Frequency Sliders: Each channel features 31 illuminated sliders, allowing you to boost or cut specific frequency bands by up to ±12 dB. The center position is flat (0 dB).
• FBQ Feedback Detection System: Activate the FBQ button. The LEDs on the frequency sliders will illuminate brightly at the frequencies where feedback is occurring, allowing for quick identification and reduction. This system can also function as an audio analyzer.
• Ограничивачи: Each channel has a dedicated limiter with a threshold control and gain reduction meters. Adjust the threshold to prevent signal peaks from exceeding a set level, protecting your sound system from overload and distortion.
• Ружичасти генератор буке: Press the PINK NOISE button to activate the internal pink noise generator. This signal can be used in conjunction with the FBQ system or an external real-time analyzer to equalize your sound system to the room acoustics.
• Input/Output Level Controls: Use these controls to adjust the overall input and output gain of each channel. The 8-digit LED meters provide accurate visual feedback for level setting. Aim for levels that are strong but do not consistently peak into the red.
• Low Cut/High Cut Filters: These filters allow you to remove unwanted low-frequency rumble or high-frequency hiss from your signal. The low cut filter typically removes frequencies below 20-30 Hz, while the high cut filter removes frequencies above 18-20 kHz.
• Бипасс прекидач: Engages or disengages the equalizer's processing, allowing for quick A/B comparison between the processed and unprocessed signal.
• Кросовер за сабвуфер: Adjust the crossover frequency for the dedicated subwoofer output, allowing you to tailor the low-frequency response of your system.

4.2 Basic Equalization Procedure

1. Start with all frequency sliders at the 0 dB (center) position.
2. Set input and output levels appropriately, ensuring no clipping.
3. For feedback control, activate the FBQ system. Identify illuminated sliders and gently reduce the gain for those specific frequencies until feedback is eliminated.
4. For room equalization, activate the pink noise generator. Use the FBQ system as a visual aid or an external analyzer to identify resonant frequencies in the room and adjust the corresponding sliders to achieve a flatter frequency response.
5. Use the low and high cut filters to clean up the signal as needed.
6. Engage the limiters and set their thresholds to prevent accidental overloads.

5. Одржавање

The Behringer FBQ6200 is designed for reliable operation with minimal maintenance.

• Чишћење: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Avoid abrasive cleaners or solvents that could damage the finish or controls.
• вентилација: Ensure that the ventilation openings are not obstructed. Proper airflow is crucial to prevent overheating, especially during extended operation.
• Складиштење: If storing the unit for an extended period, place it back in its original packaging or a protective case to prevent dust accumulation and physical damage.

КСНУМКС. Решавање проблема

If you encounter issues with your FBQ6200, consult the following common troubleshooting steps:

• Нема излаза звука:
  • Check all audio cable connections (inputs and outputs) to ensure they are secure and correctly routed.
  • Verify that the FBQ6200 is powered on and its input/output levels are not set to minimum.
  • Ensure the Bypass switch is not engaged if you expect processed sound.
  • Check the power and signal status of connected equipment (mixer, amplifier, speakers).
• Distortion or Unwanted Noise:
  • Check input and output levels. Excessive gain staging can lead to clipping and distortion. Adjust levels so meters do not consistently hit the red.
  • Ensure all cables are in good condition and properly shielded. Faulty cables can introduce noise.
  • Verify proper grounding of all audio equipment to prevent hum.
  • If experiencing persistent noise in one channel, try swapping cables or inputs to isolate the source. If the noise follows the unit, contact support.
• Проблеми са повратним информацијама:
  • Activate the FBQ Feedback Detection System. Reduce the gain on the illuminated frequency sliders until feedback is controlled.
  • Ensure microphone placement and speaker positioning are optimized to minimize feedback potential.
• Unit Feels Hot:
  • Ensure adequate ventilation around the unit. Do not place it in an enclosed space without proper airflow.
  • Avoid stacking other heat-generating equipment directly on top of the FBQ6200.
  • If the unit becomes excessively hot and causes operational issues, discontinue use and contact support.

7. Спецификације

8. Гаранција и подршка

For detailed warranty information and terms and conditions, please refer to the official Behringer website or the warranty card included with your product. In case of technical issues or for further assistance, please contact Behringer customer support through their official channels.

Ресурсе за подршку, често постављана питања и контакт информације обично можете пронаћи на Behringer official webсајту.