Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

Model: 6043BC

Увод

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Карактеристике производа

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • Подесива осветљеност: Offers three distinct light settings, ranging from a low night light to full brightness.
  • Погодан дизајн: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • Модеран стил: Features a contemporary black finish and sleek design that complements various home decors.
  • Једноставна инсталација: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Безбедносне информације

Please read and understand all instructions before installation and use. Retain this manual for future reference.

  • Само за унутрашњу употребу.
  • Немојте прекорачити максималну снагуtage of 200 Watts for incandescent bulbs.
  • Уверите се да је лamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • Чувати даље од воде и влаге.

Подешавање и инсталација

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. Припремите Л.amp: Осигурајте своје лamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. Connect the Dimmer: Укључите лamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. Укључите у зидну утичницу: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Упутство за употребу

Once installed, operate the dimmer as follows:

  1. Укључи/Подеси осветљеност: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. Искључи: After the high brightness setting, touching the pad again will turn the lamp искључено.
  3. Повер Оуtage: У случају напајања оуtage, the dimmer may reset. Simply touch the pad to resume normal operation.

Одржавање

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Решавање проблема

ПроблемМогући узрокРешење
Lamp не пали се нити се затамњује.
  • Lamp није правилно прикључен на димер.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • Неисправна сијалица.
  • Повер оуtagе или је прекидач активирао.
  • Осигурати лamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • Окрените лamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • Замените сијалицу.
  • Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.
  • Incompatible bulb (LED/CFL).
  • Лабав прикључак сијалице.
  • Replace with a standard incandescent bulb (up to 200W).
  • Затегните сијалицу у њеном грлу.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Спецификације

  • Модел: 6043БЦ
  • Бренд: Вестек
  • Режим рада: ON-NONE-OFF (3-level dimming)
  • Макимум Ватtage: 200 Watts (Incandescent bulbs only)
  • Волtage: 120В, 60Хз
  • Метод контроле: Додирните
  • Димензије артикла (Д к Ш к В): 3.9 к 1 к 7.9 инча
  • Тежина артикла: 3.8 унци
  • Материјал: Multi (Brass contact material)
  • Боја: Црно
  • Само за унутрашњу употребу: Да

Гаранција и подршка

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webсајту или се обратите њиховом одељењу за корисничку подршку.

Произвођач: АмерТац

Служба за кориснике: 201.661.9945

Webсајт: ввв.амертац.цом

© 2024 Вестек. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.