Silverline 850W SDS Plus Hammer Drill (Model 633821) User Manual

1. Увод

Thank you for choosing the Silverline 850W SDS Plus Hammer Drill, Model 633821. This powerful and versatile tool is designed for drilling in masonry, wood, and steel, as well as for light chiseling tasks. To ensure safe and efficient operation, please read this manual thoroughly before using the tool. Keep this manual in a safe place for future reference.

Image 1.1: The Silverline 850W SDS Plus Hammer Drill. This image shows the main unit of the hammer drill, highlighting its robust construction and ergonomic design.

2. Безбедносна упутства

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This section outlines general safety guidelines for power tools and specific precautions for hammer drills.

2.1 Општа безбедност електричних алата

• Безбедност на радном месту: Одржавајте своје радно место чистим и добро осветљеним. Неред или тамна места изазивају несреће. Не користите електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Утикачи електричних алата морају одговарати утичници. Никада не модификујте утикач на било који начин. Избегавајте контакт тела са уземљеним површинама као што су цеви, радијатори, шпорети и фрижидери.
• Лична безбедност: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.

2.2 Specific Hammer Drill Safety

• Hold Tool Firmly: Always hold the tool firmly with both hands to maintain control, especially during hammer drilling or chiseling.
• Обезбедите радни комад: Уверите се да је радни предмет стабилан и безбедно причвршћенampед да спречи померање током рада.
• Check for Hidden Utilities: Before drilling into walls, floors, or ceilings, check for hidden electrical wires, gas pipes, or water pipes using a suitable detector.
• Управљање прашином: Drilling and chiseling can generate significant dust. Use a dust guard and wear a dust mask to protect your respiratory system.
• прегревање: Allow the tool to cool down during prolonged use to prevent overheating.

3. Садржај пакета

Carefully unpack the Silverline 850W SDS Plus Hammer Drill and check that all items are present and undamaged. If any items are missing or damaged, please contact your retailer.

• Silverline 850W SDS Plus Hammer Drill
• Durable Carry Case
• 13мм стезна глава
• Цхуцк Кеи
• SDS Plus Shaft and Screw
• SDS Plus Masonry Drill Bits (6mm, 8mm, 10mm)
• Флат Цхисел
• Шпиљасто длето
• Заустављање дубине
• Пин Вренцх
• Дуст Гуард
• Grease Pot
• Упутство за употребу

Image 3.1: The Silverline 850W SDS Plus Hammer Drill, its durable carry case, and included accessories.

Слика 3.2: Крупни план view of the included accessories, including SDS Plus drill bits, chisels, depth stop, pin wrench, and grease pot.

4. Карактеристике производа

The Silverline 850W SDS Plus Hammer Drill is equipped with features designed for performance and user convenience:

• Снажан мотор од 850 В: Обезбеђује ample power for demanding drilling and chiseling tasks.
• Вишеструки режими рада: Easily switch between Drill, Hammer Drill, and Rotary Stop Chisel modes for various applications.
• SDS Plus Chuck System: For quick, tool-free bit changes and efficient power transfer.
• Integrated Safety Clutch: Штити корисника и алат у случају заглављивања бургије.
• Контрола променљиве брзине: Allows for precise control over drilling speed, up to 800 RPM.
• High Impact Force: Delivers 3.5 Joules of impact energy at 4,000 impacts per minute for effective masonry work.
• Помоћна ручка: Provides improved control and comfort during operation.
• Стопа дубине: За константну дубину бушења.

5. Подешавање

Before operating the hammer drill, ensure it is properly set up for your task.

5.1 Причвршћивање помоћне ручке

1. Отпустите помоћну ручку окретањем у смеру супротном од казаљке на сату.
2. Померите ручку на предњу страну тела бушилице.
3. Adjust the handle to a comfortable and secure position, then tighten it by twisting clockwise.

5.2 Inserting SDS Plus Bits

1. Clean the shank of the SDS Plus bit and apply a small amount of grease (from the supplied pot) to it.
2. Повуците чахуру стезне главе на бушилици.
3. Insert the SDS Plus bit into the chuck until it clicks into place.
4. Release the chuck sleeve. Pull on the bit to ensure it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5.3 Using the 13mm Keyed Chuck (for standard drill bits)

For drilling in wood or metal with standard round or hex shank drill bits, use the included 13mm keyed chuck.

1. Ensure the hammer drill is in 'Drill' mode (no hammer action).
2. Insert the SDS Plus shaft of the 13mm keyed chuck into the SDS Plus chuck of the hammer drill as described in section 5.2.
3. Open the jaws of the 13mm chuck using the chuck key.
4. Insert your standard drill bit and tighten the chuck jaws securely with the chuck key.

5.4 Подешавање режима рада

The mode selector switch allows you to choose between three operating modes:

• Drill Mode (Rotation Only): За бушење у дрвету, металу и пластици.
• Hammer Drill Mode (Rotation with Hammer Action): For drilling in concrete, brick, and other masonry materials.
• Rotary Stop Chisel Mode (Hammer Action Only): For light chiseling, chipping, and demolition work.

Rotate the mode selector switch to the desired setting. Ensure it clicks firmly into place.

5.5 Подешавање граничника дубине

1. Отпустите помоћну ручку.
2. Insert the depth stop rod through the hole in the auxiliary handle.
3. Adjust the rod so that the desired drilling depth is achieved when the end of the rod touches the workpiece.
4. Tighten the auxiliary handle to secure the depth stop.

6. Упутство за употребу

Follow these steps for safe and effective operation of your hammer drill.

6.1 Покретање и заустављање

• Почети: Plug the tool into a suitable power outlet. Press the ON/OFF trigger switch.
• Да се ​​заустави: Отпустите прекидач за УКЉУЧИВАЊЕ/ИСКЉУЧИВАЊЕ.
• Континуирани рад: For continuous operation, press the ON/OFF trigger switch and then press the lock-on button. To release, press the trigger switch again.

6.2 Контрола брзине

The drill features variable speed control. The drilling speed can be adjusted by the pressure applied to the trigger switch. For higher speeds, press the trigger further. For lower speeds, apply less pressure.

6.3 Drilling in Masonry (Hammer Drill Mode)

1. Select 'Hammer Drill' mode.
2. Insert an appropriate SDS Plus masonry drill bit.
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply firm, steady pressure. Do not force the drill; let the hammer action do the work.

6.4 Drilling in Wood and Metal (Drill Mode)

1. Select 'Drill' mode.
2. Insert a standard drill bit using the 13mm keyed chuck (see section 5.3).
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply moderate pressure.

6.5 Chiseling (Rotary Stop Chisel Mode)

1. Select 'Rotary Stop Chisel' mode.
2. Insert a flat or pointed SDS Plus chisel.
3. Position the chisel on the material to be removed.
4. Start the drill and apply steady pressure. Guide the chisel along the desired path.

7. Одржавање

Regular maintenance ensures the longevity and optimal performance of your tool. Always disconnect the tool from the power supply before performing any maintenance.

7.1 Чишћење

• Одржавајте вентилационе отворе чистим како бисте спречили прегревање.
• Редовно чистите кућиште алата меком,amp тканина. Немојте користити јаке хемикалије или абразивна средства за чишћење.
• Уклоните прашину или остатке са стезне главе и држача бита након сваке употребе.

7.2 Подмазивање

The SDS Plus chuck mechanism requires periodic lubrication. Use the supplied grease or a suitable equivalent for SDS Plus systems.

• Apply a small amount of grease to the shank of SDS Plus bits before insertion.
• Refer to the tool's internal lubrication points (often accessible via a screw cap) for periodic greasing of the hammer mechanism. Consult a qualified service technician if unsure.

7.3 Замена угљених четкица

This tool uses carbon brushes, which are wear parts. When the carbon brushes wear down, the motor may spark excessively or stop working. Carbon brushes should be replaced by a qualified service technician.

7.4 Складиштење

Store the tool in its durable carry case in a dry, secure place, out of reach of children.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима са којима се можете сусрести са вашом бушилицом са ударним чекићем.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Silverline customer support or a qualified service center.

9. Спецификације

Technical data for the Silverline 850W SDS Plus Hammer Drill, Model 633821.

10. Гаранција и подршка

10.1 Гаранција произвођача

The Silverline 850W SDS Plus Hammer Drill (Model 633821) comes with a Двогодишња гаранција произвођачаОва гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

For full terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official Silverline webсајту.

10.2 Корисничка подршка

For technical assistance, spare parts, or service inquiries, please contact Silverline customer support. Contact details can typically be found on the Silverline webсајту или на паковању производа.

Када контактирате подршку, припремите број модела вашег производа (633821) и серијски број (ако постоји).