Увод
The Roland DP-10 Real-Feel Pedal is a high-quality, durable pedal designed for use with electronic keyboards and digital pianos. It provides a realistic pedal feel and is equipped with features to enhance stability and compatibility with various instruments.
This manual provides essential information on the setup, operation, maintenance, and specifications of your DP-10 pedal to ensure optimal performance and longevity.
Image: The Roland DP-10 Real-Feel Pedal, showing its robust black casing, chrome pedal, and attached cable with a 1/4-inch mono phone plug.
Карактеристике
- High-quality pedal with non-slip rubber base: Ensures stability during performance, especially on smooth surfaces.
- Extra long cable for stacked keyboard setups: The 2.2-meter (approximately 7.2 feet) cable provides flexibility for various instrument configurations.
- Full and half-damper compatible: Supports advanced expressive control on compatible keyboards.
- Издржљива конструкција: Made from plastic, metal, and rubber for long-lasting use.
Image: The Roland DP-10 Real-Feel Pedal with its non-slip rubber plate extended, demonstrating its enhanced stability feature.
Шта је у кутији
Upon unpacking your Roland DP-10 pedal, please ensure all components are present:
- Roland DP-10 Real-Feel Pedal unit
- Extended cable (2.2m) permanently attached to the pedal
Сетуп
- Positioning the Pedal: Place the DP-10 pedal on a stable surface in front of your keyboard or digital piano. For optimal stability, especially on smooth floors, extend the non-slip rubber plate located at the bottom of the pedal. This plate helps prevent the pedal from sliding during use.
- Connecting to your Instrument: Locate the 1/4" mono phone plug at the end of the pedal's cable. Insert this plug firmly into the sustain pedal input jack on your keyboard or digital piano. This jack is typically labeled "SUSTAIN," "DAMPER," or "PEDAL."
- Укључено: Ensure your keyboard or digital piano is powered on after connecting the pedal.
Note: Always connect or disconnect the pedal with your instrument's power turned off to prevent potential damage or unexpected sounds.
Оперативни
The Roland DP-10 pedal can function in two primary modes, depending on your connected instrument's capabilities:
- Standard Sustain Pedal: When connected to any keyboard with a sustain pedal input, the DP-10 will function as a standard sustain pedal. Pressing the pedal will sustain the notes played, and releasing it will stop the sustain.
- Пола-Дamper Functionality: For keyboards and digital pianos that support half-damper functionality, the DP-10 can provide nuanced sustain control. This allows for varying levels of sustain depending on how deeply the pedal is pressed, mimicking the behavior of an acoustic piano's damper pedal. Refer to your instrument's manual to confirm half-damper compatibility and any specific settings required.
To use, simply press the pedal with your foot as you play your instrument. The robust design and real-feel mechanism ensure a comfortable and responsive playing experience.
Одржавање
To ensure the longevity and optimal performance of your Roland DP-10 pedal, follow these simple maintenance guidelines:
- Чишћење: Обришите површину педале меком, сувом крпом. За тврдокорну прљавштину, благо дamp cloth can be used, but ensure no moisture enters the internal components. Do not use abrasive cleaners, waxes, or solvents.
- Складиштење: When not in use, store the pedal in a clean, dry environment, away from extreme temperatures, direct sunlight, and excessive dust. Avoid placing heavy objects on the pedal.
- Нега каблова: Avoid kinking or sharply bending the cable. When coiling the cable for storage, do so loosely to prevent internal wire damage.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Педала не одржава ноте. |
|
|
| Педала клизи по поду. | Non-slip rubber plate not extended or surface is too slick. | Extend the non-slip rubber plate fully. Ensure the floor surface is clean and dry. Consider placing the pedal on a rug or mat for extra grip. |
| Пола данаamper function not working. | Instrument does not support half-damper or settings are incorrect. | Confirm your keyboard or digital piano supports half-damper functionality. Consult your instrument's manual for specific setup instructions for half-damper pedals. |
Спецификације
| Атрибут | Детаљ |
|---|---|
| Број модела | ДП-10 |
| Бранд | Роланд |
| Димензије производа | 9.5 к 4 к 3 инча (24.1 к 10.2 к 7.6 цм) |
| Тежина артикла | 1.68 фунте (0.76 кг) |
| Материјал тела | Пластика, метал, гума |
| Боја | Црно/Бело |
| Тип конектора | 1/4" Mono Phone Plug |
| Цабле Ленгтх | 2.2 метара (приближно 7.2 стопе) |
| Компатибилност | Keyboards and digital pianos with 1/4" sustain input; supports half-damper on compatible instruments. |
Гаранција и подршка
За детаљне информације о гаранцији, погледајте гарантни лист који је приложен уз ваш производ или посетите званичну веб страницу Roland-а. website. Roland provides support for its products to ensure customer satisfaction.
If you require technical assistance, have questions about your DP-10 pedal, or need to inquire about repairs, please contact Roland customer support through their official webсајт или контакт информације које се налазе на паковању вашег производа.
You can also find additional resources and a downloadable user manual (PDF) at the following link: Roland DP-10 User Manual (PDF)