King Electric ESP230-R 7-Day Programmable Electronic Thermostat User Manual

1. Увод

Welcome to the instruction manual for your King Electric ESP230-R 7-Day Programmable Electronic Thermostat. This device is engineered to provide precise temperature control and optimize energy consumption for your 208/240-Volt heating system. Its advanced features include 7-day programming capabilities, a large backlit LCD display for clear visibility, and discreetly located programming buttons to prevent unintended adjustments.

2. Безбедносне информације

УПОЗОРЕЊЕ: Опасност од струјног удара. Always disconnect power to the heating system at the main circuit breaker before installing, cleaning, or servicing this thermostat. Failure to do so can result in serious injury or death.

• Инсталацију треба да изврши квалификовани електричар у складу са свим локалним и националним електричним прописима.
• Немојте прекорачити наведену волtage (208/240V) or ampераге (22 Amp) ratings of this thermostat.
• Уверите се да су све везе ожичења безбедне и правилно изоловане.
• This thermostat is designed for use with electric resistance heating systems only.

3. Садржај пакета

• King Electric ESP230-R Thermostat
• Монтажни завртњи
• Упутство за употребу

4. Инсталација

Потребни алати: Phillips screwdriver, voltagе тестер.

1. Искључите напајање: Turn off power to the heating system at the main circuit breaker before beginning installation.
2. Уклоните стари термостат: Carefully remove your existing thermostat from the wall. Note the wiring connections.
3. Ожичење: This thermostat requires a 3-wire installation. Connect the line voltage wires and the load wires to the appropriate terminals on the ESP230-R thermostat. Refer to the wiring diagram provided with the physical product for specific connections. Ensure all connections are tight.
4. Монтажа: Secure the ESP230-R thermostat to the wall electrical box using the provided mounting screws. Ensure it is level and flush with the wall.
5. Врати снагу: Када је инсталација завршена и сви прикључци су безбедни, вратите напајање на главном прекидачу.

Напомена: The thermostat's internal sensor can be affected by drafts from the wall box or direct heat sources. Ensure the wall box is sealed to prevent cold air infiltration, and avoid installing the thermostat near windows, doors, or heat-emitting appliances.

5. Подешавање

Upon initial power-up, the thermostat will display default settings. You will need to configure the time, day, and desired temperature unit.

Слика 1: Предња страна view of the King Electric ESP230-R thermostat, showing the digital display with time, set temperature, and room temperature, along with the up/down adjustment buttons.

5.1 Подешавање времена и дана

Lift the front cover of the thermostat to access the programming buttons. Use the designated buttons (refer to the physical product's button labels) to set the current time (hour, minute, AM/PM) and the current day of the week. Confirm each setting as per the on-screen prompts.

5.2 Changing Temperature Unit (Fahrenheit/Celsius)

The thermostat defaults to Fahrenheit (°F). To switch to Celsius (°C):

1. Искључите напајање: Turn off power to the thermostat at the circuit breaker.
2. Access Jumper: Carefully remove the thermostat from its wall mount to access the internal components. Locate the small jumper pin on the circuit board.
3. Remove Jumper: Gently remove the jumper.
4. Re-mount and Restore Power: Re-mount the thermostat and restore power at the circuit breaker.
5. Ресетуј јединицу: After restoring power, it is necessary to perform a unit reset (e.g., power cycle) for the change to Celsius to take effect. Consult the physical product's detailed instructions for the exact reset procedure.

6. Упутство за употребу

6.1 Adjusting Set Temperature

Use the visible Up (▲) and Down (▼) buttons on the front of the thermostat to manually adjust the desired set temperature. A temporary override will be active until the next programmed schedule change.

6.2 Распоред програма

The ESP230-R allows for 7-day programmable scheduling, enabling you to set different temperatures for various times of the day and days of the week. This feature helps in optimizing comfort and energy savings.

1. Access Programming: Lift the front cover to reveal the programming buttons.
2. Изаберите дан/период: Use the appropriate buttons to navigate through the days of the week and the programmable periods (e.g., Wake, Leave, Return, Sleep).
3. Подешена температура: For each period, use the Up/Down buttons to set the desired temperature.
4. Сачувај подешавања: Follow the on-screen prompts to save your programmed schedule.

Савет: Setting back the temperature during unoccupied hours or while sleeping can lead to significant heating cost savings (up to 15%).

6.3 Приказ информација

The large LCD continuously displays:

• Тренутно време и дан
• Set Temperature (TEMP SET)
• Current Room Temperature (ROOM TEMP)
• Heat Indicator (illuminates when heating system is active)

7. Одржавање

The King Electric ESP230-R thermostat requires minimal maintenance.

• Чишћење: Periodically wipe the exterior of the thermostat with a soft, slightly damp крпа. Не користите абразивна средства за чишћење, раствараче или хемијске спрејеве, јер могу оштетити завршну обраду или унутрашње компоненте.
• Провидни отвори: Ensure that the small vents on the thermostat casing are free from dust and debris. Blocked vents can impair the accuracy of the internal temperature sensor.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

10.1 Информације о гаранцији

This King Electric ESP230-R thermostat is covered by a 1-годишња ограничена гаранција on all product components from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, unauthorized alteration, or acts of nature. Any attempt to repair or modify the unit by unauthorized personnel will void the warranty.

10.2 Корисничка подршка

For technical assistance, troubleshooting guidance, or to inquire about warranty claims, please contact King Electric customer service. Refer to the product packaging or the official King Electric website for the most current contact information, including phone numbers and support email addresses.

When contacting support, please have your product model number (ESP230-R) and date of purchase readily available.