1. Увод
The Grundfos UP15-42F SuperBrute Recirculating Pump is engineered for efficient circulation in heating systems, hot domestic water systems, and cooling/air-conditioning systems. This pump features a wet rotor design, ensuring quiet operation and minimal maintenance. Its robust construction and energy-efficient motor make it a reliable choice for continuous water circulation needs.
2. Безбедносне информације
Please read and understand all safety instructions before installing or operating the pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- електрична безбедност: Ensure the power supply is disconnected before any installation or maintenance. The pump operates on 115 Volts. All electrical wiring must be performed by a qualified electrician and comply with local codes.
- Температурне границе: Do not exceed the maximum fluid temperature of 230°F (110°C) or operate below the minimum fluid temperature of 36°F (2°C).
- Границе притиска: The maximum working pressure for this pump is 145 PSI. Ensure your system's pressure does not exceed this limit.
- Инсталација: Installation should be performed by qualified personnel familiar with plumbing and electrical systems.
- Вруће површине: The pump housing may become hot during operation. Avoid direct contact.
3. Производ је готовview

This image displays the Grundfos UP15-42F recirculating pump. It features a robust cast iron housing, a red motor casing, and connection points for plumbing. The pump is designed for efficient water circulation in various systems.
The Grundfos UP15-42F is a 1/25 HP SuperBrute recirculating pump designed for durability and performance. Key features include:
- Чврста конструкција: Features a cast iron housing, aluminum stator housing, stainless steel spherical separator, stainless steel/tungsten carbide rotor, and a composite impeller.
- Wet Rotor Design: Ensures quiet operation and eliminates the need for a shaft seal, reducing maintenance.
- Спречавање корозије: Designed to eliminate and prevent the corrosive effects of fresh water.
- Енергетски ефикасан: Low energy consumption with a power consumption of 25 watts.
- Једноставна инсталација: Дизајниран за једноставно подешавање.
- Побољшане перформансе: Offers enhanced efficiency for various circulation applications.
4. Спецификације
| Спецификација | Валуе |
|---|---|
| Произвођач | Грундфос |
| Парт Нумбер | 59896155 |
| Број модела ставке | 59896155 |
| Тежина артикла | 6.92 фунти |
| Димензије производа | 5.25 к 4.19 к 6.5 инча |
| Величина | Мала |
| Боја | Црвени |
| Стиле | Циркулационе |
| Материјал | Ливено гвожђе |
| Извор напајања | На електрични погон |
| Волtage | 115 Волтс |
| Ватtage | 25 watts (Max. power input: 85 W) |
| Ставка Количина паковања | 1 |
| Флов Рате | 0 - 15.5 US GPM |
| Хеад Ранге | 1 - 15 feet (12'' - 180'') |
| Потрошња воде | 155 Gallons (per hour at max flow) |
| Максимална температура течности | 230°Ф (110°Ц) |
| Minimum Fluid Temperature | 36°Ф (2°Ц) |
| Максимални радни притисак | 145 ПСИ |
| Веза | Flange - (2) 3/4'' diameter bolt holes |
| Цертифицатион | UL |
5. Инсталација и подешавање
Proper installation is crucial for the pump's performance and longevity. Refer to the detailed instructions provided with your pump packaging for specific diagrams and steps.
- Локација монтаже: Select a suitable location that allows for easy access for maintenance and ensures the motor shaft is horizontal. This orientation is critical for the wet rotor design.
- Прикључци цеви: The pump requires a flange connection with two 3/4-inch diameter bolt holes. Flanges are not included and must be purchased separately. Ensure all connections are watertight using the two gaskets provided with the pump.
- Електрични прикључак: Connect the pump to a dedicated 115-volt, single-phase power supply. Ensure all wiring conforms to local electrical codes. The pump's terminal box cover is designed for secure wiring.
- Пуњење система: After installation, fill the system with water and bleed any air from the pump and piping to prevent dry running.
- Неповратни вентил: The pump includes a POM check valve. Ensure it is correctly oriented if removed during installation.
6. Упутство за употребу
Once installed and properly connected, the Grundfos UP15-42F pump is designed for continuous operation within its specified parameters.
- Укључено: Restore power to the pump. The pump will begin circulating water.
- Праћење температуре: Ensure the fluid temperature remains within the operational range of 36°F (2°C) to 230°F (110°C).
- Праћење притиска: Verify that the system pressure does not exceed 145 PSI.
- Опционе контроле: For optimized energy savings, consider integrating an optional timer or aquastat. These devices can pre-program usage times or operate the pump by sensing water temperature, reducing unnecessary continuous operation.
- Тих рад: The wet rotor design ensures the pump operates quietly. Any unusual noises should be investigated.
7. Одржавање
The Grundfos UP15-42F pump is designed to be maintenance-free due to its wet rotor design and durable materials. No routine lubrication or shaft seal replacement is required.
- Периодични преглед: Periodically inspect the pump and connections for any signs of leaks, corrosion, or unusual wear.
- чистоћа: Keep the area around the pump clean and free from debris to ensure proper ventilation.
- Необични звуци: If the pump develops unusual noises or vibrations, consult the troubleshooting section or contact Grundfos support.
КСНУМКС. Решавање проблема
This section provides guidance for common issues. For complex problems, contact a qualified technician or Grundfos support.
- Пумпа се не покреће:
- Проверите да ли је напајање повезано и активно.
- Проверите да ли је осигурач или прекидач прегорео.
- Уверите се да су сви електрични прикључци безбедни.
- No Water Flow or Reduced Flow:
- Check for closed valves in the piping system.
- Inspect for air in the system; bleed air if necessary.
- Ensure the pump is not running dry.
- Check for blockages in the impeller or piping.
- Необична бука или вибрација:
- Air in the system can cause noise; bleed air.
- Check for loose mounting bolts or connections.
- Ensure the motor shaft is horizontal.
- If noise persists, the impeller or motor may require inspection by a professional.
- цурења:
- Check all pipe connections and ensure gaskets are properly seated and tightened.
- Inspect the pump housing for cracks or damage.
9. Гаранција и подршка
For warranty information, technical support, or service inquiries, please contact Grundfos directly. Keep your purchase receipt and product model number (59896155) readily available when contacting support.
You can typically find contact information on the official Grundfos website or within the original product packaging.