Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim User Manual

Увод

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P8057-36 is an eyeball trim designed for use with Progress Lighting 4-inch recessed lighting housings. It features a 360-degree rotation and a 30-degree tilt capability, allowing for adjustable light direction.

Важна безбедносна упутства

УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање на кутији са осигурачима или прекидачу пре инсталације или сервисирања.

• Сви електрични прикључци морају бити у складу са локалним прописима, уредбама или Националним електричним кодексом (NEC).
• Консултујте квалификованог електричара ако нисте сигурни у процес инсталације.
• Ensure the trim is compatible with your existing recessed housing. This trim is designed for 4-inch recessed housings.
• Немојте прекорачити максималну снагуtagе специфицирано за лamp. This trim is for use with 50-watt 12V MR-16 lamps.
• Handle the trim and lamp пажљиво да не дође до оштећења.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• 1 x P8057-36 Recessed Eyeball Pinhole Trim (Chestnut finish)
• Упутство за инсталацију (овај документ)

Note: Recessed housing and lamp (50-watt 12V MR-16) are sold separately.

Подешавање и инсталација

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure power is OFF before proceeding.

1. Prepare the Housing: Ensure the recessed housing is properly installed and wired according to local electrical codes. The housing should be a 4-inch model compatible with 12V MR-16 lamps.
2. Инсталирајте Лamp: Carefully insert a 50-watt 12V MR-16 lamp у лamp holder within the recessed housing. Ensure it is seated securely. (Lamp није укључено)
3. Insert the Trim: Align the P8057-36 eyeball trim with the opening of the recessed housing. Gently push the trim upwards until the retention clips (if present on your housing) engage and hold the trim firmly in place.
4. Обезбедите трим: Ensure the trim is flush with the ceiling surface. Adjust as necessary.
5. Врати снагу: Once the trim is securely installed, restore power at the circuit breaker.

Image: The P8057-36 Recessed Eyeball Pinhole Trim in Chestnut finish. This image shows the front view of the trim, highlighting its adjustable eyeball design.

Операција

The P8057-36 trim allows for directional lighting adjustment.

• Подешавање смера светлости: Gently grasp the outer ring of the eyeball and rotate it 360 degrees to direct light horizontally.
• Tilting the Eyeball: The eyeball can be tilted up to 30 degrees to aim light vertically. Carefully push or pull the eyeball to achieve the desired angle.

Note: Avoid excessive force when adjusting the eyeball to prevent damage to the mechanism.

Одржавање

• Чишћење: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp Замена: Искључите напајање пре замене лamp. Дозволите лamp to cool completely. Carefully remove the old MR-16 lamp and insert a new 50-watt 12V MR-16 lamp. Ensure the new lamp is securely seated before restoring power.

Решавање проблема

Спецификације

Гаранција и подршка

Гаранција произвођача: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Progress Lighting customer service. Refer to the official Progress Lighting webсајт за најновије контакт информације.

Можете посетити Продавница осветљења Progress на Амазону за више информација о њиховим производима.