Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Производ је завршенview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Слика 1: Предња страна view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Безбедносне информације

УПОЗОРЕЊЕ: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Не инсталирајте овај уређај у влажном илиamp локацијама.
• Уверите се да је уређај безбедно монтиран на структурни елемент плафона.
• Користите само наведени тип и снагу сијалицеtagе за спречавање прегревања и оштећења.
• Држите запаљиве материјале даље од светиљке.

Садржај пакета

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Спецификације

Подешавање и инсталација

Важно: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Припремите простор за инсталацију:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Уверите се да је површина за монтажу чиста, сува и структурно чврста.
2. Монтирајте уређај:
   • Carefully remove the fixture from its packaging.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Електричне везе:
   • Спојите белу жицу уређаја на белу (неутралну) жицу из утичнице помоћу жичане навртке.
   • Спојите црну жицу уређаја на црну (врућу) жицу из утичнице помоћу жичане навртке.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Пажљиво увуците све жице у утичницу.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Врати снагу:
   • Поново укључите напајање на прекидачу или кутији са осигурачима.
   • Test the fixture to ensure it operates correctly.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Упутство за употребу

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Укључивање/искључивање:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Одржавање

Редовно одржавање осигурава оптималне перформансе и дуготрајност вашег расветног тела.

• Чишћење:
  • Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp тканина.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Allow the fixture to dry completely before restoring power.
• Замена сијалице:
  • Искључите напајање уређаја на прекидачу.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp држачи.
  • Replace the acrylic diffuser.
  • Вратите напајање и тестирајте уређај.

Решавање проблема

Ако имате проблема са расветним телом, погледајте следеће уобичајене проблеме и решења:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Гаранција и подршка

гаранција: The Progress Lighting P7206-30EB fixture comes with a 1-годишња ограничена гаранција from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.

Корисничка подршка: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting webсајт за најновије контакт информације.

Молимо вас да сачувате рачун као доказ о куповини у сврху гаранције.