Draytek Vigor 3120 G.SHDSL Security Router User Manual

1. Увод

The Draytek Vigor 3120 is a G.SHDSL Security Router designed for reliable and secure network connectivity. It features a G.SHDSL WAN port for high-speed digital subscriber line connections, along with multiple LAN ports for local network devices. This router integrates advanced security features such as a comprehensive firewall and VPN capabilities to ensure secure and efficient network operations.

2. Водич за подешавање

2.1. Садржај пакета

Пре него што наставите, уверите се да су све компоненте присутне:

• Draytek Vigor 3120 Router
• Повер Адаптер
• Етхернет Цабле
• Водич за брзи почетак (ако је укључен)

2.2. Физичке везе

Refer to the image below for port identification on the front panel of the Vigor 3120 router.

Figure 1: Front Panel of Draytek Vigor 3120 Router. This image displays the router's front panel, highlighting the DSL port, four LAN ports, a USB port, and various LED indicators for activity, VPN, QoS, PRN, DSL link, LAN link/activity, and a reset button.

1. Прикључак за напајање: Connect the power adapter to the router's power input and then to a power outlet.
2. WAN Connection (DSL): Connect your G.SHDSL line to the router's ДСЛ лука.
3. ЛАН везе: Connect your local network devices (computers, switches, access points) to the router's ЛАН 1-4 луке.
4. УСБ веза: For 3.5G Mobile Broadband support or other USB devices, connect a compatible USB modem or device to the УСБ лука.

2.3. Почетна конфигурација

Да бисте приступили рутеру webинтерфејс за управљање заснован на:

1. Уверите се да је ваш рачунар повезан на један од ЛАН портова рутера.
2. Отвори а web прегледач (нпр. Chrome, Firefox, Edge).
3. In the address bar, type the default IP address (commonly 192.168.1.1 or refer to the Quick Start Guide) and press Enter.
4. Унесите подразумевано корисничко име и лозинку (обично admin for both, or as specified in the guide).
5. Follow the on-screen wizard for initial setup, including WAN configuration and wireless settings.

3. Упутство за употребу

3.1. G.SHDSL WAN Connectivity

The Vigor 3120 provides a dedicated G.SHDSL WAN port for high-speed, symmetrical digital subscriber line connections. Configure your G.SHDSL parameters, such as encapsulation mode and VPI/VCI settings, through the router's web interface under the WAN settings.

3.2. Wireless (802.11n) Configuration

The router provides 802.11n wireless connectivity. Access the "Wireless LAN" section in the web interface to:

• Set up your Wi-Fi network name (SSID).
• Configure security settings (WPA2-PSK recommended).
• Adjust channel and bandwidth settings for optimal performance.

3.3. VPN (Virtual Private Network)

The Vigor 3120 supports various VPN protocols (e.g., IPSec, PPTP, L2TP) for secure remote access and site-to-site connections. Configure VPN tunnels via the "VPN" menu in the web интерфејс.

3.4. Firewall and Security

Utilize the built-in firewall to protect your network. Features include:

• Филтрирање пакета
• ДоС/ДДоС одбрана
• Филтрирање садржаја
• Object-based Firewall Rules

3.5. USB 3.5G Support

The USB port allows connection of a 3.5G USB modem for mobile broadband connectivity, serving as a backup or primary connection. Ensure your 3.5G modem is compatible with the Vigor 3120.

4. Одржавање

4.1. Ажурирања фирмвера

Regularly check the Draytek website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Always back up your configuration before performing a firmware update.

4.2. Configuration Backup and Restore

It is recommended to back up your router's configuration settings periodically. This allows for quick restoration of your settings in case of a factory reset or hardware replacement. Access this feature in the "System Maintenance" section of the web интерфејс.

4.3. Cleaning and Environment

Keep the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

КСНУМКС. Решавање проблема

5.1. ЛЕД индикатори

ЛЕД диоде на предњој плочи пружају информације о статусу:

• АЦТ: Indicates system activity.
• ВПН: Lit when a VPN tunnel is active.
• КоС: Indicates Quality of Service is active.
• PRN: Printer status (if USB printer connected).
• ДСЛ: Indicates DSL line status (link/activity).
• LNK/LAN (1-4): Indicates link status and activity for each LAN port.
• РСТ: Reset button (press and hold for factory reset).

5.2. Уобичајени проблеми и решења

• Нема интернет везе:
  • Check DSL cable connection.
  • Verify DSL modem/line status.
  • Ensure WAN settings in router are correct (e.g., G.SHDSL parameters).
  • Reboot DSL modem and router.
• Споре мрежне перформансе:
  • Check for high bandwidth usage by devices.
  • Verify wireless channel interference.
  • Уверите се да је фирмвер ажуриран.
• Не могу приступити Web Интерфејс:
  • Ensure computer is connected to a LAN port.
  • Verify computer's IP address is in the same subnet as the router.
  • Покушајте другачије web претраживач.
  • Perform a soft reboot of the router.

Ако проблеми и даље постоје, размислите о враћању на фабричка подешавања (note: this will erase all configurations) or contact technical support.

6. Спецификације

7. Информације о гаранцији

Draytek products typically come with a limited manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Draytek webсајт. Сачувајте доказ о куповини за потребе гаранције.

8. Техничка подршка

For technical assistance, product inquiries, or advanced configuration guidance, please contact Draytek technical support:

• Службено Webсајт: Посетите ввв.драитек.цом for support resources, FAQs, firmware downloads, and contact information.
• Подршка на мрежи: Many regions offer online ticketing systems or email support.
• Телефонска подршка: Check the Draytek webсајт за регионалне бројеве телефонске подршке.

When contacting support, have your product model (Vigor 3120 / VIGOR3120) and serial number ready.