DYMO Organizer Xpress Embossing Label Maker 12965 User Manual

Увод

The DYMO Organizer Xpress Embossing Label Maker is a manual, handheld device designed for creating embossed labels. It operates without batteries, using a simple squeeze mechanism to imprint letters, numbers, and symbols onto durable plastic tape. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your label maker.

Image: The DYMO Organizer Xpress Embossing Label Maker, a compact, handheld device with a character dial and tape slot.

Сетуп

Loading the Label Tape

1. Open the tape compartment: Locate the latch or release button on the side or bottom of the label maker and open the cover.
2. Insert the tape cartridge: Place the DYMO embossing tape cartridge into the compartment, ensuring it sits securely. The tape should feed through the guide slot.
3. Feed the tape: Gently pull a small length of tape (approximately 1-2 inches) through the tape guide until it extends past the cutting mechanism.
4. Close the compartment: Securely close the tape compartment cover until it clicks into place.

Упутство за употребу

Креирање етикете

1. Select a character: Rotate the character dial to align the desired letter, number, or symbol with the indicator mark in the viewинг виндов.
2. Emboss the character: Firmly squeeze the handle of the label maker. You will feel a click as the character is embossed onto the tape. Release the handle completely before selecting the next character.
3. Create a space: To create a space between words, rotate the dial to the blank space character (usually indicated by a small gap or a specific symbol) and squeeze the handle once.
4. Cut the label: Once you have finished embossing your text, rotate the character dial to the cutting symbol (often a pair of scissors or a blade icon). Squeeze the handle firmly to cut the label.
5. Peel the backing: The label maker is designed to create a perforated backing for easy peeling. Gently bend the label to separate the embossed tape from its adhesive backing.
6. Apply the label: Stick the label onto a clean, dry surface.

Video: DYMO Embosser Label Maker & Labels

Одржавање

Чишћење

To maintain optimal performance, periodically wipe the exterior of the label maker with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

Тапе Стораге

Store unused label tapes in a cool, dry place away from direct sunlight to preserve their adhesive quality and prevent degradation.

Решавање проблема

• Letters are not clear or fully embossed: Ensure you are pressing the handle firmly and completely for each character. Check that the tape is properly aligned within the guide.
• Tape is not feeding: Verify that the tape cartridge is correctly inserted and that there are no obstructions or jams in the tape path. Ensure the tape is not twisted.
• Label maker stops working or characters are misaligned: Check the alignment of the character dial. The arrows on the top and bottom sections of the dial should be aligned. If misaligned, gently adjust the top layer of the dial until the arrows match.
• Label does not stick: Ensure the surface where the label is being applied is clean, dry, and smooth.

Спецификације

Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your product or visit the official DYMO webсајт. Сачувајте рачун као доказ о куповини.