Transformers Universe Deluxe Figure Acid Storm Instruction Manual

1. Увод

The Transformers Universe Deluxe Figure Acid Storm is a highly intelligent, eager, and dedicated Decepticon air warrior. Known as one of "The Rainmakers," Acid Storm possesses Hyperion3 blasters capable of seeding natural clouds with a highly destructive form of acid rain. This figure transforms between a formidable robot mode and a sleek fighter jet mode, offering dynamic play and display options.

Image: Transformers Universe Deluxe Figure Acid Storm in Robot Mode.

2. Безбедносне информације

• Опасност од гушења: Мали делови. Није за децу млађу од 3 године.
• Keep away from open flames or extreme heat.
• Avoid excessive force during transformation to prevent damage to the figure.
• За млађу децу препоручује се надзор одраслих.

3. Компоненте

Your Transformers Universe Deluxe Figure Acid Storm package includes:

• Acid Storm Figure (Robot Mode)
• 2 Launching Missiles (accessories)
• Double Hyperion3 Blasters (accessories)

Image: Back of packaging detailing figure components and modes.

4. Transformation

Acid Storm transforms between Robot Mode and Fighter Jet Mode. Follow these steps carefully.

4.1. Robot Mode to Fighter Jet Mode

1. Remove all accessories (missiles, blasters) from the figure.
2. Преклопите роботове руке у подлактице.
3. Rotate the waist 180 degrees.
4. Collapse the chest panel down to form the nosecone of the jet.
5. Fold the robot's legs together, aligning them to form the rear fuselage of the jet.
6. Rotate the wings from the back of the robot to align with the jet mode. Ensure the Decepticon insignias are facing upwards.
7. Adjust the tail fins to their jet mode position.
8. Attach the launching missiles to the designated ports under the wings.
9. Ensure all panels are securely tabbed into place for a compact jet form.

4.2. Fighter Jet Mode to Robot Mode

1. Remove all accessories (missiles, blasters) from the jet.
2. Untab the fuselage sections and separate the legs.
3. Rotate the legs into their robot mode orientation.
4. Unfold the nosecone section to reveal the robot's chest and head.
5. Rotate the waist 180 degrees to face forward.
6. Rotate the wings and tail fins to position them on the robot's back.
7. Extend the robot's arms and unfold the hands.
8. Attach the Double Hyperion3 Blasters to the robot's hands.
9. Ensure all parts are locked into their robot mode positions.

5. Оперативне карактеристике

• Launching Missiles: Insert the two launching missiles into the designated ports on the jet's wings. Press the small button near the missile to launch.
• Double Hyperion3 Blasters: These blasters can be held by the figure in robot mode. They can also be stored on the jet mode by attaching them to the underside ports.
• Flip Down Landing Gear: In fighter jet mode, locate the small landing gear components on the underside of the jet. Flip them down for ground display or up for flight mode.

6. Одржавање

• Чишћење: Wipe the figure with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Складиштење: Чувајте фигуру на хладном и сувом месту, даље од директне сунчеве светлости, како бисте спречили промену боје или деградацију материјала.
• Нега зглобова: If joints become loose, apply a small amount of clear nail polish to the joint and allow it to dry completely to restore tightness.

КСНУМКС. Решавање проблема

• Parts not aligning during transformation: Ensure all previous steps are completed correctly and that no parts are obstructing the movement. Refer to the transformation steps.
• Accessories not fitting: Check the orientation of the accessory and the port. Do not force accessories into place.
• Loose joints: Refer to the "Joint Care" section under Maintenance.

8. Спецификације

9. Гаранција и подршка

For warranty information or product support, please contact Hasbro customer service directly. Refer to the packaging for specific contact details or visit the official Hasbro webсајту.

Онлине ресурси: For additional information and community discussions, visit Transformers.com.