Perel E305DIN1

Perel E305DIN1 DIN Rail Week Timer Instruction Manual

Model: E305DIN1

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Карактеристике

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

  • Дневни и недељни програм: Allows for flexible scheduling across days and weeks.
  • 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
  • ЛЦД екран: Clear display of time, day of the week, and current operating status.
  • NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outagес.
  • 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
  • Опције монтаже: Designed for DIN rail mounting or wall mounting using the included bracket.
  • Провидни заштитни поклопац: Provides protection for the display and controls.

3. Подешавање и инсталација

Упозорење: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Монтажа

The E305DIN1 timer can be mounted in two ways:

  • Монтажа на ДИН шину: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
  • Монтажа на зид: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Електрични прикључак

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

  1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
  2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
  3. Double-check all connections for tightness and correctness before restoring power.
Perel E305DIN1 DIN Rail Week Timer with transparent cover

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Упутство за употребу

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Подешавање тренутног времена и дана

  1. Притисните тастер ЦЛОЦК дугме.
  2. Док држи ЦЛОЦК, притисните тастер ДАН дугме за подешавање текућег дана у недељи.
  3. Док држи ЦЛОЦК, притисните тастер ХОУР дугме за подешавање тренутног сата.
  4. Док држи ЦЛОЦК, притисните тастер МИН дугме за подешавање тренутне минуте.

4.2 Програмирање времена укључивања/искључивања

The timer allows for up to 8 ON/OFF program pairs.

  1. Притисните тастер ПРОГ button once to enter program mode. The display will show '1 ON'.
  2. Користите ДАН, ХОУР, и МИН buttons to set the desired ON time for program 1.
  3. Притисните ПРОГ поново. На дисплеју ће се приказати „1 ИСКЉУЧЕНО“.
  4. Користите ДАН, ХОУР, и МИН buttons to set the desired OFF time for program 1.
  5. Repeat steps 1-4 for programs 2 through 8.
  6. Притисните тастер ЦЛОЦК button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

  • Притисните тастер МАНУАЛ дугме за кретање кроз режиме:
  • НА: The output is continuously ON, overriding any programmed OFF times.
  • ВАН: The output is continuously OFF, overriding any programmed ON times.
  • АУТО: The timer operates according to the programmed ON/OFF schedules.

5. Одржавање

The Perel E305DIN1 timer requires minimal maintenance.

  • Чишћење: Обришите спољашњост меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
  • Резервна батерија: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
  • Услови животне средине: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

КСНУМКС. Решавање проблема

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

  • Тајмер се не укључује/искључује како је програмирано:
    • Проверите да ли је тајмер укључен АУТО mode. If it's in ON or OFF manual override, it will ignore programs.
    • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
    • Ensure the current time and day are accurately set on the timer.
  • Екран је празан или трепери:
    • Check the main power supply to the timer.
    • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
  • Timer loses settings after power outage:
    • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
  • Time drift (timer becomes inaccurate over time):
    • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Ако ови кораци не реше проблем, обратите се корисничкој подршци.

7. Спецификације

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

Повер Суппли220 ~ 250VAC / 50Hz
Output (Resistive Load)16A @ 230VAC, max. 3680W
Output (Inductive Load)8A @ 230VAC (cos µ = 0.4)
Minimum Switching Interval1 минут
Потрошња енергије4.4В
Радна температура-10°Ц до 40°Ц
Прецизност времена± 1 минут месечно
Резервна батеријаNiMH, up to 200h autonomy
МонтажаDIN Rail or Wall Mount
МатеријалПластика
БојаТранспарент

8. Гаранција и подршка

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Сачувајте рачун као доказ о куповини за потребе гаранције.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.