Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Безбедносне информације

УПОЗОРЕЊЕ: Непоштовање ових безбедносних упутстава може довести до материјалне штете, телесних повреда или смрти.

• Always turn off the water supply before beginning any plumbing work.
• Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре и рукавице, током инсталације.
• Уверите се да су сви спојеви безбедни и водонепропусни како бисте спречили цурење.
• Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог водоинсталатера.
• Држите мале делове ван домашаја деце како бисте спречили опасност од гушења.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Цједило од нерђајућег челика
• 27" stainless steel cable (Teflon coated)
• Алат за инсталацију
• Gaskets and fasteners

4. Спецификације

5. Инсталација

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Потребан алат

• Водоинсталатерски кит или силиконски заптивач
• Подесиви кључ или браве за канале
• Одвијач (Прстоглави и равни)
• Мерна трака
• Заштитне наочаре и рукавице

5.2 Инсталација корак по корак

1. Припремите каду: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Install the Overflow Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Повежите кабл: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Тест за цурење: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Операција

The Geberit PushControl system is designed for simple and intuitive operation.

• Да бисте затворили одвод: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Да бисте отворили одвод: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Одржавање

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Чишћење украсне плоче: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Инспекција каблова: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

КСНУМКС. Решавање проблема

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Гаранција и подршка

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webсајту.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webсајт: ввв.геберит.цом
• Служба за кориснике: Refer to the Geberit webсајт за регионалне контакт информације.

Када контактирате подршку, припремите број модела вашег производа (151.603) и датум куповине.