GREISINGER 600437

The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 Tester for the Air User Manual
Model: GOX 100 (Part Number: 600437)
1. Увод
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Безбедносне информације
- Пажљиво прочитајте ово упутство пре руковања уређајем.
- Не излажите уређај екстремним температурама, директној сунчевој светлости или прекомерној влази.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Држите уређај и његове компоненте ван домашаја деце.
- Одложите батерије и уређај у складу са локалним прописима.
3. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Упутство за употребу
- 9V Block Battery (may not be included, check packaging)
4. Подешавање
4.1 Инсталација батерије
- Пронађите одељак за батерију на задњој страни уређаја.
- Отворите поклопац одељка за батерије.
- Insert a 9V block battery, ensuring correct polarity.
- Добро затворите поклопац одељка за батерије.
4.2 Повезивање сензора
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.

The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Упутство за употребу
5.1 Укључивање/искључивање
- Да бисте укључили уређај, притисните он/офф дугме. Екран ће се осветлити.
- Да бисте искључили уређај, притисните и држите он/офф дугме док се екран не искључи.
5.2 Мерење
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentagе (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Притисните тастер режим button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Калибрација
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Притисните и држите цал button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.

The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Одржавање
7.1 Замена сензора
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Искључите уређај.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Perform a calibration as described in Section 6.
7.2 Чишћење
- Clean the device casinг са меким, дamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок / решење |
|---|---|
| Уређај се не укључује | Check battery installation and charge. Replace battery if necessary. |
| Нетачна очитавања | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Техничке спецификације
| Параметар | Валуе |
|---|---|
| Меасуремент Ранге | 0 - 100 % Oxygen |
| Резолуција | 0.1 % |
| Прецизност мерења | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Повер Суппли | 9В блок батерија |
| Врста заштите | ИП65 |
| Димензије (В к Ш) | 106 мм к 67 мм |
| Тежина | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 м |
| Thermal Compensation | Аутоматски |
10. Гаранција и подршка
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER webсајту.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webсајт или контакт информације наведене у документацији вашег производа.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.