Mebus 52451

Mebus Funkwanduhr 52 451 Radio-Controlled Wall Clock User Manual

Модел: 52451

Увод

Thank you for choosing the Mebus Funkwanduhr 52 451 Radio-Controlled Wall Clock. This clock automatically sets itself to the correct time using a radio signal, ensuring accuracy and convenience. Please read this manual carefully to ensure proper setup and operation of your new clock.

Mebus Funkwanduhr 52 451 Radio-Controlled Wall Clock front view

Слика: Фронт view of the Mebus Funkwanduhr 52 451, highlighting its 25 cm diameter, DCF77 radio control, and versatile design suitable for various rooms.

Сетуп

1. Инсталација батерије

  1. Пронађите одељак за батерије на полеђини сата.
  2. Insert one (1) AA battery, ensuring the correct polarity (+/-). The battery is not included with the clock.
Back of Mebus Funkwanduhr 52 451 showing battery compartment

Слика: Позади view of the Mebus Funkwanduhr 52 451, showing the battery compartment and the radio-controlled mechanism. This is where the AA battery should be inserted.

2. Почетна синхронизација времена

After inserting the battery, the clock will automatically begin searching for the DCF77 radio signal. This process may take several minutes. During this time, the hands will typically move to the 12 o'clock position and then adjust to the correct time.

  • Place the clock near a window or in an open area to facilitate better signal reception.
  • Избегавајте постављање сата у близини електронских уређаја који могу изазвати сметње.

3. Монтажа

The Mebus Funkwanduhr 52 451 is designed for wall mounting. Use a suitable screw or hook (not included) to securely hang the clock on your desired wall location.

Упутство за употребу

Аутоматско подешавање времена

Your Mebus wall clock is equipped with a radio-controlled movement that receives the DCF77 signal from Frankfurt, Germany. This ensures that the clock always displays the precise time.

  • The clock automatically adjusts for Daylight Saving Time (summer/winter time changes). No manual adjustment is required.
  • If the clock loses signal, it will attempt to resynchronize periodically.

Функција аларма

This model features an alarm function. Please refer to the specific markings or buttons on the clock face or back for setting and activating the alarm. Typically, there is a dedicated alarm setting knob and an ON/OFF switch.

Одржавање

Чишћење

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the clock's finish or internal components.

Замена батерије

When the clock hands stop moving or the time becomes inaccurate, it is time to replace the battery. Follow the battery installation steps outlined in the Setup section. Always use a fresh AA battery.

Решавање проблема

  • Clock not setting time: Ensure the battery is correctly installed and fresh. Move the clock to a location with better radio signal reception, away from potential interference sources like televisions, computers, or large metal objects. Allow up to 24 hours for the clock to receive the signal, especially in areas with weak reception.
  • Clock stops or runs slow: Замените батерију новом АА батеријом.
  • Alarm not working: Check if the alarm is properly set and activated. Ensure the battery has sufficient power.

Спецификације

БрандМебус
Број модела52451
Дисплаи ТипеАналог
СтилеМинималистички
Посебна карактеристикаAlarm, Radio-Controlled (DCF77)
Извор напајања1 к АА батерија (није укључена)
Унутрашња/спољна употребаИндоор
Тип монтажеВалл Моунт
Тежина артикла300 грама
Материјал оквираПластика
ОбликРоунд
Пречник25 цм
Mebus Funkwanduhr 52 451 with 25cm dimensions indicated

Слика: Фронт view of the Mebus Funkwanduhr 52 451, illustrating its 25 cm diameter.

Гаранција и подршка

За информације о гаранцији и корисничку подршку, погледајте документацију која је достављена уз куповину или се директно обратите произвођачу. Сачувајте доказ о куповини за евентуалне рекламације у вези са гаранцијом.

© 2023 Mebus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.