Amerec K60 Digital Control and Steamhead User Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Amerec K60 Digital Control and Steamhead. The K60 is a 3-button digital control designed for Amerec steam bath systems, featuring on/off functionality, temperature adjustment, and time duration settings. It includes a remote-mounted temperature sensor, allowing flexible installation either inside or outside the steam room. The display conveniently alternates between the ambient room temperature and the remaining steam time.

2. Безбедносне информације

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product. This device is intended for use with Amerec steam generators only. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Електрична опасност: Искључите напајање на прекидачу пре инсталирања или сервисирања.
• Опасност од опекотина: The steamhead can become very hot during operation. Do not touch the steamhead while the steam generator is active.
• Оштећење воде: Уверите се да су сви спојеви водонепропусни како бисте спречили цурење.
• вентилација: Ensure proper ventilation in the steam room as per local building codes.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• K60 Digital Control Panel
• Даљински сензор температуре
• Цонтрол Цаблес
• Comfort Flo Steamhead (Oil Rubbed Bronze)
• Упутство за инсталацију (овај документ)

4. Подешавање и инсталација

The Amerec K60 control kit includes the K60 control, a remote sensor, necessary cables, and the Comfort Flo steam head. The control can be mounted either inside or outside the steam room.

4.1. Монтажа контролне табле

Choose a suitable location for the K60 control panel. It should be easily accessible and visible. If mounting inside the steam room, ensure it is not directly in the path of the steam flow. The control panel requires a standard electrical gang box for installation.

1. Turn off power to the steam generator at the main circuit breaker.
2. Install a standard electrical gang box at the desired control location.
3. Route the control cable from the steam generator to the gang box.
4. Connect the control cable to the K60 control panel terminals as per the wiring diagram provided with your steam generator.
5. Secure the K60 control panel into the gang box.

4.2. Installing the Remote Temperature Sensor

The remote sensor is crucial for accurate temperature readings. Mount it approximately 6 inches below the ceiling, away from the steamhead and any direct drafts.

1. Select a location for the sensor, ensuring it is not directly above the steamhead.
2. Route the sensor cable from the steam generator to the chosen sensor location.
3. Connect the sensor cable to the remote temperature sensor.
4. Mount the sensor securely to the wall.

4.3. Installing the Comfort Flo Steamhead

The Comfort Flo steamhead should be installed approximately 6-12 inches above the finished floor, away from the seating area and any direct contact points.

1. Ensure the steam line from the generator is properly plumbed to the desired steamhead location.
2. Apply thread sealant to the steamhead threads.
3. Thread the Comfort Flo steamhead into the steam line fitting.
4. Добро затегните, али немојте превише затегнути.

Слика 1: Amerec K60-ORB Digital Control and Comfort Flo Steamhead. This image shows the K60 digital control panel and the matching oil rubbed bronze Comfort Flo steamhead, which are key components of the steam bath system.

5. Упутство за употребу

The K60 control features three buttons for easy operation: On/Off, Temperature, and Time Duration.

5.1. Укључивање/искључивање

• Притисните тастер ОН/ОФФ button once to start the steam generator. The display will illuminate and show the current room temperature.
• Притисните тастер ОН/ОФФ button again to turn off the steam generator.

5.2. Подешавање температуре

• While the steam generator is on, press the ТЕМПЕРАТУРА button. The display will show the current set temperature.
• Користите ТЕМПЕРАТУРА button to cycle through available temperature settings. The generator will adjust to maintain the selected temperature.

5.3. Setting Time Duration

• While the steam generator is on, press the ВРЕМЕ button. The display will show the current set duration.
• Користите ВРЕМЕ button to cycle through available time durations. The steam generator will automatically shut off after the set time expires.
• The display alternates between ambient room temperature and time remaining during operation.

6. Одржавање

Regular maintenance ensures optimal performance and longevity of your Amerec K60 Digital Control and Steamhead.

• Чишћење контролне табле: Обришите контролну таблу меком, дamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Cleaning the Steamhead: Periodically check the steamhead for mineral buildup. If necessary, gently clean the opening with a soft brush. For stubborn deposits, consult your steam generator's manual for descaling procedures.
• Инспекција каблова: Periodically inspect all cables for signs of wear or damage. If any damage is found, contact a qualified technician for replacement.

КСНУМКС. Решавање проблема

If you encounter issues with your K60 control, refer to the following common problems and solutions:

For issues not listed here, or if solutions do not resolve the problem, please contact Amerec customer support.

8. Спецификације

9. Гаранција и подршка

Опис гаранције: Amerec provides a warranty of five years for parts and two years for labor on the K60 Digital Control and Steamhead.

For technical support, warranty claims, or to purchase replacement parts, please contact Amerec customer service. Refer to the contact information provided with your original steam generator documentation or visit the official Amerec webсајту.