InFocus IN102 преносиви DLP пројектор - упутство за употребу

1. Увод

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Кључне карактеристике укључују:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Дуготрајно лamp and filter-free design for reduced maintenance.

2. Шта је у кутији

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Повер Цорд
• ВГА кабел
• Торбица за ношење
• Ремоте Цонтрол
• Безбедносна упутства
• CD Quick Start/User Guide

3. Производ је готовview

Слика 3.1: Предња страна View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Слика 3.2: Задња страна View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Слика 3.3: Врх View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Слика 3.4: Дно View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Подешавање

4.1 Постављање

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Повезивање напајања

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Укључите други крај кабла за напајање у уземљену електричну утичницу.

4.3 Повезивање видео извора

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• С-Видео: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Композитни видео: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Ensure all cables are securely connected before powering on the projector.

5. Упутство за употребу

5.1 Укључивање/искључивање

1. Да бисте укључили, притисните Повер дугме на контролној табли пројектора или даљинском управљачу. Индикаторска лампица напајања ће се упалити.
2. Да бисте искључили напајање, притисните Повер button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 Избор улазног извора

Притисните тастер Извор button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Подешавање слике

• Фокус и зум: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Кеистоне Цоррецтион: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Осветљеност и контраст: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Еко режим

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3Д функционалност

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Одржавање

6.1 Лamp Замена

Пројектор лamp има ограничен век трајања. Када лamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Искључите кабл за напајање.
3. Locate and open the lamp поклопац на врху пројектора.
4. Пажљиво уклоните стари лamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Осигурајте лamp поклопац и прикључите кабл за напајање.
6. Ресетујте лamp timer in the projector's OSD menu.

6.2 Чишћење

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Складиштење

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Проверите везе: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Користите Извор button on the projector or remote to select the correct input channel corresponding to your connected device.
• Подешавања екрана рачунара: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7, или F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Пројектор Лamp: Проверите лamp indicator light. If it's red or blinking, the lamp можда ће бити потребна замена.

7.2 Projector Shuts Off Unexpectedly

• Прегревање: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Проблеми: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Повер Суппли: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Проблеми са квалитетом слике

• Мутна слика: Adjust the focus ring on the projector lens.
• Distorted Image (Trapezoid): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Даљински управљач не ради

• Батерије: Замените батерије у даљинском управљачу.
• Линија видљивости: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Спецификације

9. Гаранција и подршка

9.1 Ограничена гаранција

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Пројектор: 5-годишња ограничена гаранција
• Делови и рад: 2-year coverage
• Lamp: 6-месечна ограничена гаранција

Сачувајте доказ о куповини за гаранцијске захтеве.

9.2 Корисничка подршка

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webсајту.