StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (RKPW081915) Instruction Manual

1. Увод

This manual provides instructions for the installation, operation, and maintenance of your StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (Model RKPW081915). This Power Distribution Unit (PDU) is designed to provide reliable power distribution and surge protection for equipment within network server racks and cabinets.

2. Безбедносне информације

WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.

• Прочитајте сва упутства пре употребе производа.
• Овај производ је намењен само за унутрашњу употребу.
• Ensure the PDU is properly grounded. Do not use with ungrounded outlets.
• Do not exceed the maximum electrical rating of 120V/15A. Overloading the PDU can cause damage and fire hazards.
• Do not disassemble or modify the PDU. Refer all servicing to qualified personnel.
• Keep away from water or excessive humidity.
• Do not plug one PDU into another.

3. Садржај пакета

Image: The StarTech.com PDU and its instruction manual, as typically found in the product packaging.

• 1x 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (RKPW081915)
• 1к Упутство за употребу

4. Производ је готовview

The StarTech.com RKPW081915 is a 1U horizontal rack-mountable PDU designed for efficient power distribution in server environments. It features 8 NEMA 5-15R outlets, a 6-foot power cord, and built-in surge protection.

Карактеристике предњег панела

Слика: Детаљна view of the PDU's front and back, highlighting the LED indicators, power switch, and outlets.

• LED Surge Indicator: Illuminates when surge protection is active.
• LED Ground Indicator: Illuminates when the PDU is properly grounded.
• Power/Reset Switch: Controls power to all outlets and acts as a circuit breaker reset.

Карактеристике задњег панела

• 8 x NEMA 5-15R Outlets: Provides power connections for your equipment.
• Integrated 6ft Power Cord: Connects the PDU to a power source.

Image: Close-up of the rear of the PDU, displaying the eight power outlets and the attached power cord.

5. Подешавање

5.1 Распакивање

Carefully remove the PDU and all components from the packaging. Inspect for any damage during shipping. If any damage is found, contact your vendor immediately.

5.2 Монтажа у сталак

The RKPW081915 PDU is designed for horizontal mounting in any standard 19-inch server rack that is 4 inches (10.16 cm) deep or greater. It occupies 1U of rack space.

1. Align the mounting ears of the PDU with the desired rack unit (U) on your server rack.
2. Secure the PDU to the rack using appropriate rack screws (not included). Ensure both sides are firmly attached.

Image: The PDU mounted horizontally within a server rack, demonstrating its 1U form factor and integration with other equipment.

Image: A visual representation of the PDU's height (1U) and cable length (6ft), confirming its compatibility with standard 19-inch racks.

5.3 Повезивање уређаја

1. Ensure the PDU's power/reset switch is in the OFF position.
2. Plug the power cords of your network and server equipment into the 8 NEMA 5-15R outlets on the rear of the PDU.
3. Connect the integrated 6-foot power cord of the PDU to a grounded 120V/15A power source.

6. Упутство за употребу

6.1 Укључивање/искључивање

To power on the connected equipment, press the Power/Reset switch on the front panel to the ON position. To power off, press the switch to the OFF position.

6.2 ЛЕД индикатори

• Surge LED (Green): When illuminated, it indicates that the surge protection feature is active and functioning. If this LED is off, the surge protection has been compromised, and the unit should be replaced.
• Ground LED (Green): When illuminated, it indicates that the PDU is properly grounded. If this LED is off, there may be a grounding issue with your power source or the PDU itself.

6.3 Прекидач

The Power/Reset switch also functions as a circuit breaker. If an overload occurs, the switch will trip to the OFF position, cutting power to all connected devices to prevent damage. To reset the circuit breaker, reduce the load on the PDU and then press the switch back to the ON position.

7. Одржавање

7.1 Чишћење

To clean the PDU, ensure it is powered off and disconnected from the main power source. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.

7.2 Редовне провере

• Periodically check the Surge and Ground LEDs to ensure they are illuminated, indicating proper function and grounding.
• Inspect the power cord and connected device cords for any signs of damage or wear.
• Уверите се да су све везе безбедне.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

This StarTech.com product is backed by a lifetime warranty, ensuring long-term reliability and peace of mind. In addition, free lifetime 24/5 multi-lingual technical assistance is available to help you with any questions or issues you may encounter.

For technical support or warranty claims, please visit the official StarTech.com webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун о куповини ради потврде гаранције.