Intermatic EI400C

Intermatic EI400C Electronic Countdown In-Wall Timer User Manual

Model: EI400C

1. Увод

The Intermatic EI400C Electronic Countdown In-Wall Timer is designed to provide automatic shut-off functionality for various electrical loads, including indoor and outdoor lighting, bathroom fans, whole house fans, and other appliances. This timer offers precise control from 1 second to 24 hours, enhancing convenience and energy efficiency in your home or office. Its silent operation and simple push-button interface make it user-friendly, while its no-neutral wire requirement simplifies installation in most standard wall boxes.

2. Важне информације о безбедности

WARNING: Risk of Electric Shock. Improper installation can lead to serious injury or death.

  • Увек искључите напајање на прекидачу или кутији са осигурачима пре инсталирања или сервисирања тајмера.
  • Installation should be performed by a qualified electrician or in accordance with all local and national electrical codes.
  • Do not use this timer with sunlamps, saunas, or any loads that could cause personal injury if timed incorrectly or if the timer malfunctions.
  • Уверите се да су сви жичани спојеви безбедни и правилно изоловани.
  • Овај уређај је намењен само за унутрашњу употребу.

3. Производ је готовview

The Intermatic EI400C is an electronic countdown timer designed for in-wall installation. It features a digital display and intuitive controls for setting countdown durations.

3.1 Компоненте

  • Дигитални екран: Shows current time and countdown status.
  • Дугме за укључивање/искључивање: Activates or deactivates the timer.
  • Дугмад Плус (+) / Минус (-): Adjust countdown duration.
  • Дугме за паузу: Temporarily stops the countdown.
  • Одељак за батерије: Houses the CR2 lithium battery.

3.2 Слике производа

Intermatic EI400C Timer installed with wall plate
Слика 1: Intermatic EI400C Electronic Countdown Timer installed in a wall plate, showing the digital display.
Фронт view of Intermatic EI400C Timer without wall plate
Слика 2: Фронт view of the EI400C timer module, revealing its compact design before wall plate installation.
Сиде view of Intermatic EI400C Timer showing wiring details
Слика 3: Сиде view of the EI400C timer, illustrating the wiring terminals and load ratings printed on the side.
Intermatic EI400C Timer with front cover open, revealing control buttons
Слика 4: The EI400C timer with its front cover opened, exposing the 'pause', 'on/off', and adjustment buttons for programming.

4. Подешавање и инсталација

The Intermatic EI400C timer is designed for easy installation, compatible with single-pole or 3-way switch configurations and does not require a neutral wire connection.

4.1 Кораци пре инсталације

  1. Искључите напајање: Locate the circuit breaker or fuse that controls the switch you are replacing and turn off the power. Verify power is off using a voltagе тестер.
  2. Уклоните постојећи прекидач: Пажљиво уклоните зидну плочу и одврните постојећи прекидач из зидне кутије. Искључите жице са старог прекидача.

4.2 Упутства за ожичење

The EI400C timer is compatible with both single-pole and 3-way switch setups. Refer to the diagram provided with your product for specific wiring configurations. Generally, the timer will have two load wires and a ground wire. For 3-way applications, one of the traveler wires from the existing 3-way switch will be connected to the timer.

  • Connect the timer's wires to the corresponding house wires using wire nuts.
  • Уверите се да су све везе чврсте и безбедне.
  • The EI400C does not require a neutral wire, simplifying installation in older homes.

4.3 Mounting and Finalizing Installation

  1. Carefully push the wired timer into the wall box.
  2. Secure the timer to the wall box with the provided screws.
  3. Attach the decorative wall plate.
  4. Врати снагу: Поново укључите напајање на прекидачу.

4.4 Инсталација батерије

The timer comes with a replaceable CR2 lithium battery, which powers the internal clock and settings memory. The battery is typically pre-installed or needs to be inserted upon initial setup.

  • Open the small front cover of the timer to access the battery compartment.
  • Insert the CR2 lithium battery, observing the correct polarity.
  • Добро затворите поклопац одељка за батерије.

5. Упутство за употребу

The EI400C timer offers simple, push-button operation for setting countdown durations from 1 second to 24 hours.

5.1 Setting a Countdown Time

  1. Контроле приступа: Gently open the front cover of the timer to reveal the control buttons.
  2. Подесите време: Користите + и - buttons to set the desired countdown duration. The display will show the selected time.
  3. Тајмер за покретање: Притисните тастер Он/Офф button to activate the timer. The connected load will turn on, and the timer will begin counting down.

5.2 Turning Off Before Countdown Ends

If you wish to turn off the connected load before the set countdown time expires, simply press the Он/Офф button again. This will immediately turn off the load and reset the timer.

5.3 Функција паузе

Притисните тастер Пауза button to temporarily halt the countdown. The connected load will remain on. Press Пауза поново да бисте наставили одбројавање.

5.4 Lockable Settings

The timer features lockable settings to prevent unintended changes to the program. Refer to the detailed instructions included in the product packaging for how to activate and deactivate this feature.

5.5 Visual/Audible Warnings

The EI400C can be configured to provide a visual or audible warning before the timer turns off. Consult the full product manual for steps on enabling and customizing these warning options.

5.6 Видео са упутствима

Видео 1: An official Intermatic video providing an overview of their in-wall timers, including the EI400 series. This video demonstrates general features and benefits of Intermatic in-wall timers, which are applicable to the EI400C model.

6. Одржавање

The Intermatic EI400C timer requires minimal maintenance, primarily focusing on battery replacement.

6.1 Замена батерије

The internal CR2 lithium battery provides power for the timer's memory and display, typically lasting up to three years. When the battery is low, a 'LoBatt' indicator may appear on the display.

  1. Open the front cover of the timer.
  2. Carefully remove the old CR2 battery from its compartment.
  3. Insert a new CR2 lithium battery, ensuring correct polarity.
  4. Добро затворите предњи поклопац.

Напомена: Some users have reported that the battery compartment cover can be difficult to open or may not stay securely closed after multiple battery changes. Exercise care when opening and closing the compartment. If the cover does not stay closed, ensure the battery makes proper contact.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your Intermatic EI400C timer.

ПроблемМогући узрокРешење
Timer display is blank or shows 'LoBatt'Low or dead CR2 battery, or poor battery contact.Replace the CR2 lithium battery. Ensure the battery is inserted correctly and the compartment cover is securely closed to maintain contact.
Timer shows 'NoOP' errorIndicates a problem with battery contact or internal operation.Check and re-seat the CR2 battery. If the issue persists, the unit may require replacement.
Connected load does not turn on/offNo power to the timer, incorrect wiring, or faulty load.Verify power at the circuit breaker. Double-check wiring connections according to the installation instructions. Test the connected load (e.g., light bulb) with a different switch or power source.
Difficulty opening battery compartment coverTight fit or worn plastic tabs.Use a small, flat-head screwdriver to gently pry open the cover. Be careful not to damage the plastic tabs.
Timer does not hold settings after power outageDead or missing CR2 battery.The CR2 battery maintains settings during power outages. Ensure it is installed and functional.

8. Спецификације

ФеатуреДетаљ
Број моделаEI400C
БрандИнтерматиц
БојаИвори
МатеријалПластика
ВолtageКСНУМКС-КСНУМКС ВАЦ
Максимално оптерећење20 Amps
Тајмер Ранге1 Second to 24 Hours
Тип прекидачаЈеднополни или тросмерни
Тип монтажеStandard Wall Box, Rectangular Decorator Wall Plate
Баттери Рекуиред1 CR2 Lithium (included)
Трајање батеријеДо 3 година
Димензије4.13 к 1.75 к 1.2 инча
Тежина артикла6 унце (0.38 фунте)
ЦертифицатионЦСА Цертифиед
УПЦ078275101371

9. Гаранција и подршка

9.1 Информације о гаранцији

The Intermatic EI400C Electronic Countdown In-Wall Timer comes with a 5-годишња ограничена гаранцијаОва гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

9.2 Корисничка подршка

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic webсајт или паковање производа за најновије контакт информације.

Онлине ресурси: Посетите Intermatic Store on Amazon за додатне информације о производима и ресурсе.

© 2023 Intermatic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.