Vivitar VIV-VT-3

Vivitar VIV-VT-3 Micro Tripod User Manual

Model: VIV-VT-3

1. Увод

This manual provides instructions for the safe and effective use of your Vivitar VIV-VT-3 Micro Tripod. Please read this manual thoroughly before using the product and retain it for future reference.

The Vivitar VIV-VT-3 is a compact and portable tripod designed to provide stable support for cameras. Its small size makes it suitable for travel and on-the-go photography.

Кључне карактеристике:

  • Компактан дизајн: Perfect size to fit in a purse or backpack, enhancing portability.
  • Издржљива конструкција: Engineered for sturdy support and longevity.
  • Tilt Ball Head: Allows for flexible camera positioning and angle adjustments.
Vivitar VIV-VT-3 Micro Tripod

Figure 1: Vivitar VIV-VT-3 Micro Tripod. This image shows the compact black tripod with its three legs and integrated ball head.

2. Безбедносне информације

  • Ensure the tripod is placed on a stable, level surface to prevent tipping.
  • Do not exceed the maximum weight limit of 3.3 pounds (1.5 kg) for attached devices.
  • Always secure your camera or device firmly to the tripod mount before use.
  • Држите статив даље од екстремних температура, влаге и корозивних материјала.
  • Do not attempt to force adjustments; if a part is stiff, check for obstructions.
  • Чувајте ван домашаја деце да бисте спречили незгоде.

3. Садржај пакета

  • Vivitar VIV-VT-3 Micro Tripod (1 unit)

4. Подешавање

  1. Unpack the Tripod: Carefully remove the Vivitar VIV-VT-3 Micro Tripod from its packaging.
  2. Position the Legs: Spread the three legs of the tripod outwards until they are fully extended and stable. Ensure all three feet are firmly on the ground.
  3. Прикључите свој уређај:
    • Locate the standard 1/4-inch screw on the top of the tripod's ball head.
    • Align the screw with the tripod mounting hole on the bottom of your camera or compatible device.
    • Rotate your camera clockwise onto the screw until it is securely fastened. Do not overtighten.
  4. Adjust the Ball Head: The tripod features a tilt ball head for flexible positioning.
    • Loosen the locking knob (if present, typically a small knob on the side of the ball head) to allow the ball head to move freely.
    • Position your camera to the desired angle.
    • Tighten the locking knob to secure the camera in place.

5. Упутство за употребу

Once your camera is securely mounted and the tripod is set up, you can begin using it to stabilize your shots.

  • Стабилан пласман: Always place the tripod on a flat, stable surface. Avoid uneven ground or slippery areas that could cause the tripod to fall.
  • Подешавање угла: Use the tilt ball head to precisely adjust the camera's angle. Loosen the locking knob, set the angle, and then re-tighten the knob firmly.
  • Преносивост: Due to its compact size, the VIV-VT-3 is ideal for tabletop photography, low-angle shots, or as a handgrip for video recording when folded.

6. Одржавање

  • Чишћење: Обришите статив меком, сувом крпом. За тврдокорну прљавштину, благо дamp Може се користити крпа, а затим одмах осушити. Не користите јаке хемикалије или абразивна средства за чишћење.
  • Складиштење: Store the tripod in a cool, dry place away from direct sunlight and excessive dust.
  • инспекција: Periodically check all screws and connections to ensure they are tight. Do not lubricate the ball head unless specifically instructed by the manufacturer.

КСНУМКС. Решавање проблема

Problem: Tripod is unstable.
решење: Ensure the tripod legs are fully spread and placed on a flat, level surface. Verify that the camera is securely mounted and its weight is within the tripod's limit.
Problem: Camera is not holding its angle.
решење: Check that the locking knob on the ball head is fully tightened after adjusting the camera's position. If the issue persists, ensure the camera's weight does not exceed the tripod's capacity.
Problem: Camera cannot be securely attached.
решење: Confirm that your camera has a standard 1/4-inch tripod mounting hole. Ensure the screw on the tripod's ball head is not stripped or damaged. Rotate the camera clockwise until it is snug, but do not overtighten.

8. Спецификације

БрандУживо
Назив моделаVIV-VT-3
Број моделаВТ3
БојаЦрно
Компатибилни уређајиКамера
Ограничење тежине3.3 фунти (приближно 1.5 кг)
Максимална висина3 инча
Минимална висина3 инча
Тип главе стативаБалл Хеад
Број делова ногу1
Преклопљена величина3 инча (В) к 3 инча (Ш) к 3 инча (Д)
УПЦ681066553602

9. Гаранција и подршка

Vivitar products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Vivitar webсајту.

Подршка на мрежи: www.vivitar.com/support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.