1. Производ је готовview
The Sunlite PLT26/E/SP27K is a 26-watt compact fluorescent plug-in light bulb designed for use with external electronic ballasts. This 4-pin bulb provides 1800 lumens of light output with a color rendering index (CRI) of 80, ensuring accurate color perception. It features a 2700K color temperature, producing a warm white light similar to traditional incandescent bulbs. The bulb is engineered for longevity, offering an average lamp life of 10,000 hours, and is compatible with GX24Q-3 4-Pin sockets.
Figure 1: Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb. This image displays the overall structure of the 4-pin compact fluorescent bulb.
2. Безбедносне информације
Please read and understand all safety instructions before installing or replacing the light bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Искључивање: Always turn off the power to the fixture at the circuit breaker or fuse box before attempting any installation, removal, or maintenance.
- Цоол Довн: Allow the bulb to cool completely before handling or replacing it to prevent burns.
- Правилно одлагање: This compact fluorescent lamp contains a small amount of mercury. Dispose of the bulb according to local, state, and federal regulations. Do not dispose of in regular household trash.
- Компатибилност баласта: Ensure that the fixture's electronic ballast is compatible with a 26-watt, 4-pin CFL bulb (GX24Q-3 base). Using an incompatible ballast can damage the bulb or fixture.
- Само за унутрашњу употребу: This bulb is designed for indoor use in appropriate fixtures.
- Без затамњивања: This bulb is generally not dimmable unless explicitly stated on the packaging or fixture. Using it with a dimmer not designed for CFLs may cause damage or malfunction.
3. Инсталација
Follow these steps to properly install your Sunlite PLT26/E/SP27K light bulb:
- Проверите искључење напајања: Confirm that the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Уклоните стару сијалицу (ако је применљиво): If replacing an existing bulb, gently grasp the base of the old bulb and pull it straight out from the socket. Avoid twisting the glass tubes.
- Проверите утичницу: Ensure the GX24Q-3 4-pin socket is clean and free from debris.
- Поравнајте пинове: Carefully align the four pins on the base of the new Sunlite bulb with the corresponding slots in the fixture's socket.
- Уметните сијалицу: Push the bulb firmly and straight into the socket until it is securely seated. Do not force the bulb or twist the glass tubes.
Слика 2: Крупни план view of the 4-pin base of the Sunlite PLT26/E/SP27K bulb. This image highlights the GX24Q-3 base for proper alignment during installation.
4. Операција
Once the bulb is securely installed and the power is restored, the Sunlite PLT26/E/SP27K bulb will illuminate when the light switch is turned on. Compact fluorescent lamps typically require a brief warm-up period to reach full brightness and stable color output. This is normal operation and not an indication of a defect.
5. Одржавање
The Sunlite PLT26/E/SP27K light bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Чишћење: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass tubes with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb.
- Замена: When the bulb reaches the end of its operational life (approximately 10,000 hours), it will need to be replaced. Follow the installation steps in Section 3 in reverse to safely remove the old bulb and install a new one.
КСНУМКС. Решавање проблема
If you encounter issues with your Sunlite PLT26/E/SP27K light bulb, refer to the following troubleshooting tips:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Сијалица не светли | Нема струје за причвршћивање Сијалица није правилно постављена Неисправна сијалица Неисправан баласт | Проверите осигурач и зидни прекидач Ensure bulb is fully inserted into socket Замените сијалицу новом Consult an electrician to check/replace ballast |
| Bulb flickers or cycles on/off | Incompatible or failing ballast Сијалица се ближи крају животног века Лабава веза | Ensure ballast is compatible; replace if failing Замените сијалицу Re-seat bulb firmly in socket |
| Излаз светлости је слаб | Сијалица није потпуно загрејана Сијалица се ближи крају животног века | Allow a few minutes for bulb to reach full brightness Замените сијалицу |
7. Спецификације
Detailed technical specifications for the Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb:
Figure 3: Sunlite PLT26/E/SP27K bulb illustrating its approximate length of 5.20 inches.
| Феатуре | Спецификација |
|---|---|
| Бранд | Сунлите |
| Број модела | PLT26/E/SP27K |
| Лигхт Типе | Компактна флуоресцентна лампа, флуоресцентна |
| Ватtage | 26 Ваттс |
| Осветљеност | 1800 лумена |
| Температура боје | 2700 Келвина (топла бела) |
| Индекс приказивања боја (ЦРИ) | 80 |
| Булб Басе | GX24Q-3 4-Pin |
| Просечан живот | 10,000 сата |
| Волtage | 100-120 волти, 60 херца |
| Дужина сијалице | Приближно 5.20 инча |
| Материјал | Copper (pins) |
| Унутрашња/спољна употреба | Индоор |
8. Гаранција и подршка
For specific warranty information regarding your Sunlite PLT26/E/SP27K light bulb, please refer to the product packaging or contact Sunlite customer support directly. General support and product inquiries can be directed to the manufacturer's official channels.
Произвођач: Сунлите
Webсајт: Visit the Sunlite Store on Amazon