Electro-Harmonix NEOCLONE

Упутство за употребу Electro-Harmonix Neo Clone аналогне хорске педале

Model: NEOCLONE

Увод

The Electro-Harmonix Neo Clone is an analog chorus pedal designed to deliver the classic Small Clone sound in a compact, pedalboard-friendly enclosure. It utilizes a high-quality bucket brigade chip for its true analog design, providing a rich and lush sonic texture.

Карактеристике

  • Compact, pedalboard-friendly footprint.
  • Total analog design using a high-quality bucket brigade chip.
  • Sultry sonic texture with depth control.
  • Operates on a 9V battery (included) or optional 9V power adapter.

Сетуп

Покретање педале

The Neo Clone can be powered by a 9V battery or an optional 9V DC power adapter. A 9V battery is included with the pedal. To install or replace the battery, remove the four screws on the bottom plate of the pedal. Connect the battery to the battery clip inside the pedal and replace the bottom plate.

For external power, use a 9V DC power adapter with a center-negative plug. The power jack is located at the top of the pedal.

Повезивање педале

  1. Повежите свој инструмент (нпр. гитару) са ИНПУТ прикључак на десној страни педале користећи стандардни инструментални кабл од 1/4 инча.
  2. Повежите AMP (OUTPUT) jack on the left side of the pedal to your ampлифијатор или следећу ефект педалу у вашем сигналном ланцу користећи стандардни инструментални кабл од 1/4 инча.
  3. If using an external power adapter, plug it into the 9V DC jack.

The Neo Clone is typically placed early in the signal chain, often before distortion or overdrive pedals, to achieve a classic chorus sound.

Управљање педалом

The Neo Clone features simple controls for intuitive operation:

Контроле

  • Дугме за брзину: This knob controls the speed of the chorus effect. Turning it clockwise increases the modulation speed, while turning it counter-clockwise decreases it.
  • DEPTH Switch: This toggle switch selects between two different depth settings for the chorus effect. The "up" position provides a deeper, more pronounced chorus, while the "down" position offers a more subtle effect.
  • ножни прекидач: Engages or bypasses the chorus effect. The red LED illuminates when the effect is active.

Основна употреба

To activate the chorus effect, press the footswitch. The red LED will light up. To bypass the effect, press the footswitch again. Experiment with the RATE knob and DEPTH switch to find your desired chorus sound. Lower rate settings with higher depth can create lush, swirling textures, while higher rate settings can produce more vibrato-like or rotary speaker effects.

Electro-Harmonix Neo Clone Analog Chorus Pedal

Image: The Electro-Harmonix Neo Clone pedal, showing its Rate knob, Depth switch, and footswitch. Input and Amp (Output) jacks are visible on the sides.

Демонстратион Видеос

Electro-Harmonix - Neo Clone - Demo

Video: A demonstration of the Electro-Harmonix Neo Clone pedal, showcasing various settings and their resulting sounds. The video highlights the pedal's versatility in creating different chorus effects.

Electro-Harmonix Neo Clone Analog Chorus

Video: An official demonstration of the Electro-Harmonix Neo Clone Analog Chorus pedal, illustrating its sound capabilities and control functions.

Одржавање

  • Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
  • Избегавајте излагање педале екстремним температурама, влази или директној сунчевој светлости.
  • When not in use for extended periods, remove the battery to prevent leakage and damage.
  • Ensure all cable connections are secure to prevent signal loss or intermittent operation.

Решавање проблема

No Sound or Weak Signal

  • Check all cable connections to ensure they are securely plugged into the correct input/output jacks.
  • Verify the power supply. If using a battery, ensure it is fresh and correctly installed. If using an adapter, confirm it is the correct voltage (9V DC) and polarity (center-negative).
  • Test the pedal with a different instrument cable or amplifier to rule out external equipment issues.

"Pop" Sound When Engaging Effect

Some true bypass pedals, including the Neo Clone, may produce a slight "pop" sound when engaged. This is often a characteristic of the true bypass switching mechanism and typically does not indicate a malfunction. If the pop is excessively loud, ensure proper grounding of your equipment and try engaging the pedal when not actively playing.

Спецификације

ФеатуреДетаљ
Тежина артикла0.8 унци
Димензије производа3.45 к 0.65 к 2.75 инча
Број модела ставкеNEOCLONE
БатеријеПотребна је 1 батерија од 9В (укључена)
Тип конектораАудио прикључак од 6.35 мм (1/4 инча)
Хардверски интерфејс1/4-инчни аудио
Формат сигналаАналог
Врста материјалаПластика, метал
Извор напајањаБаттери Поверед
Волtage9 Волтс

Гаранција и подршка

Electro-Harmonix products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Electro-Harmonix webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини за потребе гаранције.

© 2024 Electro-Harmonix. Сва права задржана.