Forney 58402 Electrical Receptacle Instruction Manual

1. Производ је готовview

The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.

Кључне карактеристике:

• Heavy duty Bakelite pin-type design for durability.
• Wall electrical receptacle for surface mounting.
• 2-pole/3-wire grounding for enhanced safety.
• 50 Amp with 125/250-Volt capacity.
• NEMA 6-50 electrical configuration.

Слика 1: Предња страна view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampераге ретингс.

2. Безбедносне информације

УПОЗОРЕЊЕ: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.

• Уверите се да се поштују сви локални и национални електрични прописи.
• Користите одговарајућу личну заштитну опрему (ЛЗО), као што су изоловане рукавице и заштитне наочаре.
• Проверите волtagе и amperage of your circuit match the receptacle's ratings (50A, 125/250V).
• Do not use this receptacle if it appears damaged.
• Држите децу даље од електричних инсталација.

3. Подешавање и инсталација

This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.

Потребни алати и материјали:

• Шрафцигери (Пхилипс и Флатхеад)
• Жице стриптизета
• Волtagе тестер
• Mounting screws (appropriate for surface)
• Electrical box (if not already present)

Кораци инсталације:

1. Искључите напајање: Locate the circuit breaker or fuse controlling the circuit where the receptacle will be installed and turn it OFF. Verify power is off using a voltagе тестер.
2. Припремите монтажну површину: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
3. Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.


Слика 2: Позади view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.

4. Жичне везе: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
• Strip approximately 1/2 inch of insulation from each wire.
• Connect the L1 (Hot) wire to one of the brass-colored terminals.
• Connect the L2 (Hot) wire to the other brass-colored terminal.
• Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.


Слика 3: Дно view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.

5. Сигурно ожичење: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
6. Поново саставите: Carefully place the cover over the wired base and secure it with the provided screws.
7. Врати снагу: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.

4. Упутство за употребу

The Forney 58402 Electrical Receptacle is designed for straightforward operation.

1. Проверите компатибилност: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.


Слика 4: Крупни план view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.

2. Уметните утикач: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
3. Уклоните утикач: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.

5. Одржавање

Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.

• Периодични преглед: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
• Чишћење: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
• Затегните везе: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
• Заштита животне средине: If installed in a damp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.

КСНУМКС. Решавање проблема

If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.

7. Спецификације

8. Гаранција и подршка

Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.

You may visit the official Forney webсајт за контакт информације и додатне ресурсе: ввв.форнеиинд.цом