Gold Hunter 9-Function Metal Detector User Manual

Увод

Thank you for choosing the Gold Hunter 9-Function Metal Detector. This device is designed for easy operation and effective detection of various metals, including ferrous and non-ferrous targets. Its lightweight design and sensitivity control make it suitable for both beginners and experienced users in various treasure hunting environments. Please read this manual thoroughly before operating your metal detector to ensure proper use and optimal performance.

Безбедносне информације

• Увек добијте дозволу пре претраге на приватном поседу.
• Avoid searching in areas where underground utilities (cables, pipes) may be present. Contact local authorities if unsure.
• Exercise caution when digging to avoid injury or damage to property.
• Do not operate the detector near live electrical wires or equipment.
• Keep the detector away from extreme temperatures and moisture.
• Одложите батерије одговорно у складу са локалним прописима.

Садржај пакета

Молимо вас да проверите садржај пакета како бисте били сигурни да су сви предмети присутни:

• Gold Hunter Metal Detector Main Unit
• Адјустабле Стем
• Search Coil with Cable
• Наслон за руке
• Кориснички приручник (овај документ)

Подешавање и монтажа

Follow these steps to assemble your Gold Hunter Metal Detector:

1. Причврстите трагачку завојницу: Connect the search coil to the lower stem using the provided bolt and knob. Ensure it is securely fastened but not overtightened.
2. Connect the Stems: Insert the lower stem into the middle stem, and then the middle stem into the upper stem. Adjust the length to a comfortable height using the locking collars.
3. Mount the Control Box: Slide the control box onto the upper stem. Secure it in place.
4. Wrap the Cable: Carefully wrap the search coil cable around the stem, ensuring it is snug but not stretched. Plug the cable connector into the corresponding port on the control box.
5. Инсталирајте батерије: Open the battery compartment (usually located on the control box or under the armrest) and insert the required batteries, observing correct polarity. This model operates on a rechargeable battery.

Image: Fully assembled Gold Hunter 9-Function Metal Detector, showing the control box, adjustable stem, and search coil.

Упутство за употребу

Укључивање и искључивање

• To turn on the detector, locate the power button/knob on the control box and switch it to the 'ON' position.
• To turn off the detector, switch the power button/knob to the 'OFF' position.

Подешавање осетљивости

The Sensitivity Control allows you to adjust the detector's responsiveness to targets. Higher sensitivity settings can detect smaller or deeper objects but may also pick up more ground noise or interference.

• Increase Sensitivity: Turn the sensitivity knob clockwise (or press the '+' button) to increase detection depth.
• Decrease Sensitivity: Turn the sensitivity knob counter-clockwise (or press the '-' button) to reduce false signals, especially in highly mineralized ground or areas with electrical interference.

Дисцриминатион Моде

The discrimination feature allows the detector to ignore certain types of metal, typically iron (ferrous metals), while still detecting more valuable non-ferrous metals like gold, silver, and copper.

• Setting Discrimination: Use the discrimination control (knob or buttons) to set the level at which unwanted metals are rejected. A higher discrimination setting will filter out more types of junk metal.
• Режим „све у металу“: For maximum depth and to detect all types of metal, set the discrimination to its lowest level or select the 'All-Metal' mode if available.

Техника пометања

Правилна техника чишћења је кључна за ефикасно откривање:

• Hold the search coil parallel to the ground, about 1-2 inches above the surface.
• Sweep the coil from side to side in a slow, overlapping motion.
• Maintain a consistent speed and height for best results.
• When a target is detected, the detector will emit an audible tone, and the display (if present) may indicate the type of metal.

Одржавање

• Чишћење: Wipe down the detector with a damp cloth after each use. Do not use abrasive cleaners or solvents. The search coil can be rinsed with water, but ensure the control box remains dry.
• Складиштење: Store the detector in a cool, dry place when not in use. If storing for an extended period, remove the rechargeable battery to prevent leakage.
• Одржавање батерије: Recharge the battery fully before storage and periodically during long storage periods to maintain battery health.
• Инспекција каблова: Regularly check the search coil cable for any signs of wear or damage.

Решавање проблема

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Gold Hunter webсајт. Сачувајте доказ о куповини за потребе гаранције.

For further assistance, you may contact the seller, Master Detector, through the Amazon platform where the product was purchased.