Lutron CTCL-153P-WH

Lutron CTCL-153P-WH Contour CFL/LED Dimmer Switch Instruction Manual

Model: CTCL-153P-WH

Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your Lutron CTCL-153P-WH Contour CFL/LED Dimmer Switch. This dimmer is designed to provide smooth and reliable dimming for compatible Compact Fluorescent (CFL) and Light Emitting Diode (LED) bulbs. It features a compact design and does not require a neutral wire for installation, simplifying the upgrade process for many homes.

Подешавање и инсталација

Before beginning installation, ensure the power to the circuit breaker is turned OFF to prevent electrical shock. It is recommended to consult a qualified electrician if you are unsure about any steps.

Шта је укључено

  • Lutron CTCL-153P-WH Dimmer Switch
  • Wire nuts (typically included, but verify packaging)
  • Mounting screws (typically included, but verify packaging)

Note: The Claro wallplate is sold separately and is not included with the dimmer switch.

Потребан алат (није укључен)

  • Одвијач (Пхиллипс и/или равна глава)
  • Жице стриптизета
  • Електрична трака
  • Волtagе тестер

Кораци инсталације

  1. Искључите напајање: Locate the circuit breaker that controls the light fixture you are working on and turn it OFF. Verify power is off using a voltagе тестер.
  2. Уклоните стари прекидач: Carefully remove the existing wallplate and switch from the wall box. Disconnect the wires from the old switch.
  3. Идентификујте жице: This dimmer does not require a neutral wire. Identify the two load wires (hot and switched hot) and the ground wire.
  4. Connect New Dimmer: Connect the wires from the wall box to the corresponding wires on the Lutron CTCL-153P-WH dimmer switch using wire nuts. Ensure all connections are secure. Connect the ground wire.
  5. Планина Димер: Пажљиво гурните жичани прекидач за пригушивање у зидну кутију. Причврстите га приложеним монтажним вијцима.
  6. Инсталирајте зидну плочу: Attach the Claro wallplate (sold separately) over the dimmer switch.
  7. Врати снагу: Поново укључите напајање на прекидачу.
  8. Test dimer: Тестирајте прекидач за пригушивање да бисте осигурали правилан рад.
Lutron CTCL-153P-WH Dimmer Switch installed in a wall

Image: The Lutron CTCL-153P-WH Dimmer Switch, shown installed in a wall. It features a main rocker switch for on/off and a smaller slide control for dimming.

Operating Your Dimmer Switch

The Lutron CTCL-153P-WH dimmer switch is designed for intuitive control of your lighting. It features two primary controls:

  • Прекидач за укључивање/искључивање: The larger bottom switch acts as a standard light switch. Press the top of the rocker to turn lights ON, and the bottom to turn lights OFF.
  • Dimming Slide Control: The smaller slide control located above the rocker switch allows you to adjust the brightness level. Slide it upwards to increase brightness and downwards to decrease brightness.
Close-up of Lutron CTCL-153P-WH Dimmer Switch controls

Слика: Крупни план view of the dimmer switch, highlighting the on/off rocker and the dimming slide control for easy identification.

Одржавање

The Lutron CTCL-153P-WH dimmer switch requires minimal maintenance. To clean the surface, simply wipe it with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components. Ensure power is off before cleaning.

Решавање проблема

  • Lights Flicker or Buzz:
    • Ensure that the bulbs you are using are compatible with CFL/LED dimmers.
    • Проверите да ли је укупан ватtage of your bulbs does not exceed the dimmer's maximum rating (150W for LED/CFL).
    • Adjust the dimmer's low-end trim setting (if available on your model, consult specific product documentation for details).
  • Lights Do Not Dim or Turn Off Completely:
    • Confirm that the bulbs are dimmable CFL or LED types.
    • Check all wire connections for tightness and proper contact.
    • Ensure the dimmer is correctly installed for a single-pole or 3-way application as intended.
  • Dimmer Does Not Work:
    • Check the circuit breaker to ensure power is restored to the circuit.
    • Проверите да ли су сви прикључци ожичења исправни и безбедни.
    • Ensure the dimmer is not overloaded with incompatible or excessive wattagе сијалице.

If you continue to experience issues, contact Lutron customer support or consult a qualified electrician.

Спецификације

ПроизвођачЛутрон
Парт НумберЦТЦЛ-153П-ВХ
Број модела ставкеЦТЦЛ-153П-ВХ
Димензије производа4 к 2.2 к 4.5 инча
Тежина артикла1.6 унци
БојаБела
МатеријалГлосси Вхите
Извор напајањаЦордед Елецтриц
Волtage120 Волтс
Ватtage150 watts (for CFL/LED)
Тип сијалицеФлуоресцентна, ЛЕД
Тип монтажеВалл Моунт
Свитцх СтилеКлизни прекидач
Минимум Лоад5W
Потребна је неутрална жицабр

Гаранција и подршка

For specific warranty information and details regarding your Lutron CTCL-153P-WH dimmer switch, please refer to the documentation included with your product packaging or visit the official Lutron website. Lutron provides customer support for product inquiries, technical assistance, and warranty claims.

Lutron Customer Service:

  • Webсајт: ввв.лутрон.цом
  • Телефон: Refer to the Lutron webсајт за регионалне контакт бројеве.

© 2023 Lutron Electronics Co., Inc. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.