Showtec LED Par 64 Short Q4-18 Black Упутство за употребу

1. Увод

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Безбедносне информације

Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:

• Ensure the device is connected to a grounded power outlet with the correct voltagе (2.4Е+2 волта наизменичне струје).
• Не излажите уређај киши или влази.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Обезбедите одговарајућу вентилацију око уређаја како бисте спречили прегревање.
• Избегавајте директно излагање очију извору светлости.
• Увек искључите напајање пре чишћења или било каквог одржавања.
• Пажљиво рукујте уређајем. Избегавајте испуштање или излагање јаким ударцима.

3. Производ је готовview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key viewс производа:

Слика 3.1: Предња страна view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Подешавање

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Монтажа: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Прикључак за напајање: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX веза (опционо): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Почетно укључивање: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Оперативни

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Контролна табла прекоview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• Режим: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Подешавање: Enters/confirms settings within a selected mode.
• горе: Креће се кроз опције менија нагоре или повећава вредности параметара.
• доле: Креће се надоле кроз опције менија или смањује вредности параметара.

5.2 DMX контрола

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Самостални режими

Use the 'Mode' button to select standalone programs. These may include:

• Аутоматски програми: Pre-programmed light shows that run automatically.
• Звук активан: The light reacts to ambient sound via a built-in microphone.
• Статичка боја: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Чишћење: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp Може се користити крпа. Не користите абразивна средства за чишћење или раствараче.
• Чишћење сочива: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Замена осигурача: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• инспекција: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Спецификације

9. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webсајт. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

Произвођач: Сховтец

Webсајт: www.highlite.com/en/brands/showtec