1. Увод
Thank you for choosing the Audison SR 4 4-Channel 360W Power Ampспасилац. Овај приручник пружа основне информације за правилну инсталацију, рад и одржавање вашег amplifier. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.
The Audison SR 4 is designed to deliver high-quality audio amplification for your car audio system, featuring a built-in crossover for precise sound tuning.
2. Безбедносне информације
- Препоручена професионална инсталација: Installation of car audio equipment can be complex. It is highly recommended to have this ampЛифиер инсталиран од стране квалификованог стручњака.
- Искључите батерију: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits and damage.
- Правилно ожичење: Use appropriate gauge wiring for power, ground, and speaker connections as specified in the installation section. Incorrect wiring can lead to overheating, fire, or damage to the amplifier and vehicle.
- вентилација: Осигурајте amplifier is mounted in a location with adequate ventilation to prevent overheating. Do not cover the amplifier or mount it in an enclosed space without airflow.
- Влага и топлота: Избегавајте монтирање amplifier in areas exposed to direct sunlight, excessive heat, or moisture.
- Сигурна монтажа: Сигурно монтирајте amplifier to prevent it from becoming a projectile in the event of a sudden stop or accident.
- Нивои јачине звука: Дуготрајно излагање високој јачини звука може изазвати оштећење слуха. Подешавајте јачину звука одговорно.
3. Садржај пакета
Please check the contents of your Audison SR 4 amplifier package. If any items are missing or damaged, contact your authorized Audison dealer immediately.
- Audison SR 4 4-Channel Power Ampлифиер
- Прибор за монтажу (шрафови, подлошке)
- Кориснички приручник (овај документ)
- Гарантни лист
4. Производ је готовview
The Audison SR 4 is a high-performance 4-channel amplifier designed for car audio enthusiasts. It features robust construction and advanced circuitry to deliver clean, powerful sound. The integrated crossover allows for flexible system configuration, enabling you to optimize sound for various speaker setups.

Слика 4.1: Фронт view of the Audison SR 4 ampспасилац, шоуasing its compact design and input/output terminals. This image illustrates the general layout of the amplifier's connections and controls.
Кључне карактеристике:
- 4-Channel Configuration
- Излазна снага 360 вата
- Built-in Crossover for flexible system tuning
- Robust and compact design
- High-quality audio reproduction
5. Инсталација и подешавање
Proper installation is crucial for the performance and longevity of your Audison SR 4 ampспасилац. Пажљиво пратите ова упутства.
5.1 Место монтирања
- Choose a dry, well-ventilated location away from direct heat sources and moisture.
- Обезбедите довољно простора око ampЛифиер за проток ваздуха ради спречавања прегревања.
- Монтирајте amplifier securely to a solid surface using the provided mounting hardware. Avoid mounting on carpet or other soft materials that could impede airflow.
- Common mounting locations include under seats, in the trunk, or behind panels.
5.2 Ожичење
Before making any connections, ensure the vehicle's battery is disconnected.
- Снага (Б+): Connect a heavy-gauge power cable (e.g., 8 AWG or larger, depending on total system power) directly from the positive terminal of the vehicle's battery to the amplifier's B+ terminal. Install an appropriate fuse holder within 18 inches (45 cm) of the battery.
- Уземљење (ГНД): Connect a heavy-gauge ground cable of the same size as the power cable from the amplifier's GND terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical connection.
- Даљинско укључивање (REM): Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output to the ampREM терминал пуњача. Ова жица окреће ampукључивање и искључивање горионика помоћу ваше главне јединице.
- РЦА улази: Повежите RCA каблове са предње стране ваше главне јединице.amp излази на amplifier's RCA input jacks. Ensure correct channel matching (Front L/R, Rear L/R).
- Излази за звучнике: Повежите звучнике на amplifier's speaker output terminals. Pay close attention to polarity (+ and -) for each speaker. The SR 4 supports 4-channel stereo or 2-channel bridged operation. Refer to the amplifier's terminal markings for specific configurations.
5.3 Crossover and Gain Adjustment
The Audison SR 4 features adjustable crossovers and gain controls to fine-tune your audio system.
- Подешавања скретнице: Use the High-Pass Filter (HPF) and Low-Pass Filter (LPF) controls to direct specific frequency ranges to your speakers. For full-range speakers, you might use HPF to protect them from low bass. For subwoofers, use LPF. Consult your speaker specifications for recommended crossover points.
- Гаин Цонтрол: Контрола појачања одговара ampУлазна осетљивост уређаја на излазни ниво ваше главне јединице. Почните са појачањем подешеним на минимум. Пустите познату нумеру на око 75% максималне јачине звука ваше главне јединице. Полако повећавајте amplifier's gain until you hear distortion, then back off slightly. Do not use the gain control as a volume knob.
6. Упутство за употребу
Once properly installed and configured, operating your Audison SR 4 amplifier is straightforward.
- Укључивање/искључивање: Тхе amplifier will automatically turn on when your head unit is powered on (via the remote turn-on wire) and turn off when the head unit is switched off.
- Контрола јачине звука: Adjust the overall system volume using your head unit's volume control.
- Подешавања звука: Further sound adjustments (bass, treble, balance, fader) should primarily be made through your head unit. The amplifier's crossover and gain settings are for initial system tuning and should not be frequently adjusted.
7. Одржавање
The Audison SR 4 ampУређај за спасавање захтева минимално одржавање како би се осигурао дуготрајан рад.
- Чишћење: Периодично обришите ampОбришите спољашњост уређаја меком, сувом крпом. Не користите јаке хемикалије или абразивна средства за чишћење.
- вентилација: Уверите се да је amplifier's cooling fins and surrounding area remain free of dust and debris to maintain proper heat dissipation.
- Везе: Повремено проверите све спојеве ожичења како бисте били сигурни да су безбедни и да немају корозије.
КСНУМКС. Решавање проблема
If you experience issues with your Audison SR 4 amplifier, refer to the following common problems and solutions before contacting support.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема струје / AmpЛифиер се не укључује |
|
|
| Нема излаза звука |
|
|
| Дистортед Соунд |
|
|
| AmpПрегревање усисивача |
|
|
9. Спецификације
The following specifications are typical for the Audison SR 4 ampдизалица:
- Модел: СР 4
- Број канала: 4
- Излазна снага: 360 Watts (Total RMS, typical)
- Волtage: 15 Volts (Operating Range)
- Тежина артикла: 7.26 фунте (приближно)
- Димензије производа (Д к Ш к В): 11.81 к 11.81 к 11.81 инча (приближно)
- Тип монтаже: Сурфаце Моунт
- Произвођач: Аудисон
- Интегрисани кросовер: Yes (HPF/LPF)
10. Гаранција и подршка
Audison products are engineered for reliability and performance. This product is covered by a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or warranty claims, please contact your authorized Audison dealer or visit the official Audison website for contact information and resources. When contacting support, please have your product model number (SR 4) and purchase information readily available.
Official Audison Webсајт: ввв.аудисон.еу