VOLTCRAFT PPS-13610 Laboratory Power Supply User Manual

1. Увод

This manual provides comprehensive instructions for the safe and efficient operation of your VOLTCRAFT PPS-13610 Laboratory Power Supply. This device is designed as a potential-free DC voltage source for various laboratory and educational applications. It features adjustable voltage and current outputs, programmable memory locations, and remote control capabilities via USB.

Молимо вас да пажљиво прочитате ово упутство пре руковања уређајем и сачувате га за будуће потребе.

2. Безбедносна упутства

• Always operate the power supply indoors in a dry, well-ventilated area.
• Ensure the power supply is connected to a properly grounded electrical outlet.
• Не излажите уређај влази, киши или екстремним температурама.
• Избегавајте блокирање вентилационих отвора да бисте спречили прегревање.
• Не покушавајте да отворите цasing or modify the device. Refer all servicing to qualified personnel.
• Before making any connections or disconnections, ensure the power supply is turned off.
• Use appropriate safety connectors and cables for all connections.
• Be aware of the maximum current ratings for the front (5A) and rear (20A) output terminals.

3. Производ је готовview

The VOLTCRAFT PPS-13610 features a clear digital display and intuitive controls for precise voltage and current adjustments. Below are descriptions of the front and rear panels.

3.1 Предња плоча

Слика: Фронт view of the VOLTCRAFT PPS-13610 power supply, showing the digital display, voltage and current adjustment knobs, power switch, and auxiliary output terminals.

• Дигитални екран: Приказује јачину звука у реалном временуtage (V) and current (A) output, along with C.V. (Constant Voltage) and C.C. (Constant Current) indicators.
• Волtagе Дугме за подешавање: Користи се за подешавање јачине звука на излазуtage. Features both fine and coarse adjustment.
• Ручица за подешавање струје: Used to set the maximum allowable output current. Features both fine and coarse adjustment.
• Прекидач: Главна контрола напајања за јединицу.
• Auxiliary Output (5A Max): Front terminals for connecting loads requiring up to 5 Amperes. These are 4 mm safety connectors.
• Rear Control Indicator: Illuminates when the unit is being controlled remotely.

3.2 Задња плоча

Слика: Позади view of the VOLTCRAFT PPS-13610 power supply, showing the main output terminals, cooling fan, power input, USB port, and remote control port.

• Главни излаз: Clamp connections for high current applications, supporting the full rated current (up to 20A).
• Вентилатор за хлађење: Ensures proper thermal management of the unit.
• Улаз наизменичне струје: Standard IEC C14 inlet for connecting the main power cable.
• УСБ порт: For connecting to a computer for remote control and programming.
• Порт за даљинско управљање: For external remote control connections.
• Прекидач режима: Selects between Normal, Preset, and Remote Control modes.
• Recall Buttons (P1, P2, P3): For recalling saved voltagе и тренутна подешавања.

4. Подешавање

1. Распакивање: Carefully remove the power supply from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. Пласман: Place the unit on a stable, level surface. Ensure adequate clearance around the cooling fan and ventilation openings for proper airflow. Avoid direct sunlight, heat sources, and areas with excessive dust or humidity.
3. Прикључак за напајање:
   • Ensure the power switch on the front panel is in the 'OFF' (O) position.
   • Connect the provided AC power cord to the AC Power Input on the rear panel and then to a suitable grounded electrical outlet (100-240V~, 50/60Hz).
4. Излазне везе:
   • For loads requiring up to 5A, use the 4mm safety connectors on the front panel.
   • For loads requiring higher currents (up to 20A), use the clamp connections on the rear panel. Ensure connections are secure.
   • Always observe correct polarity (+ to + and - to -) when connecting your load.

5. Упутство за употребу

5.1 Основни рад

1. Укључено: Flip the power switch on the front panel to the 'ON' (I) position. The digital display will illuminate.
2. Сеттинг Волtage:
   • Ротирајте Волtagе Дугме за подешавање to set the desired output voltage.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
3. Подешавање ограничења струје:
   • Ротирајте Дугме за подешавање струје to set the maximum allowable output current. This acts as a current limit.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
   • The current limit can be preset without a short circuit bridge.
4. Прикључно оптерећење: Након подешавања жељене јачине звукаtage and current limit, connect your load to the appropriate output terminals (front or rear).
5. Излаз праћења: The digital display shows the actual output voltagе и струја.
   • Тхе ЦВ индикатор illuminates when the power supply is operating in Constant Voltage mode (output voltage is stable at the set value).
   • Тхе ЦЦ индикатор illuminates when the power supply is operating in Constant Current mode (output current is stable at the set limit, typically when the load resistance is too low for the set voltagи).
6. Искључивање: Disconnect the load, then flip the power switch to the 'OFF' (O) position.

5.2 Using Preset Memory Locations

The PPS-13610 allows you to save and recall three different voltage and current limit settings.

1. Подесите жељени волуменtage and current limit using the respective adjustment knobs.
2. To save, refer to the specific instructions in the full product manual (not provided in detail here).
3. To recall a saved setting, use the P1, P2, or P3 buttons on the rear panel (ensure the Mode switch is set to 'Preset').

6. Remote Control and Programmable Features

The power supply can be controlled remotely via a USB connection to a computer, enabling advanced programmable functions.

1. УСБ веза: Connect the power supply to your computer using a standard USB cable via the USB port on the rear panel.
2. Инсталација софтвера: Install the included software on your computer. Refer to the software's documentation for installation and usage instructions.
3. Избор режима: Set the 'Mode' switch on the rear panel to 'Remote Ctrl' for computer control. The 'Rear Control' indicator on the front panel will illuminate.
4. Cyclic Workflows: The software allows you to program up to 20 different voltage and current sets with varying time periods. These workflows can be repeated up to 999 times, ideal for automated testing and experimental setups.

7. Одржавање

• Чишћење: Искључите напајање из мреже пре чишћења. Користите меку, суву крпу за брисање спољашњости. Не користите абразивна средства за чишћење или раствараче.
• вентилација: Regularly check that the cooling fan and ventilation openings are free from dust and obstructions.
• Замена осигурача: Ако се уређај не укључи, можда је потребно заменити осигурач.
  • Ensure the power supply is completely disconnected from the mains.
  • Locate the fuse holder near the AC power input on the rear panel.
  • Replace the fuse with one of the same type and rating: Т6АЛ250В.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact VOLTCRAFT customer service directly. Details can typically be found on the manufacturer's official webсајту или преко вашег места куповине.

Произвођач: ВОЛТЦРАФТ