Увод
Welcome to the instruction manual for your Rexel Auto+ 60X Cross-Cut Paper Shredder. This document provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use.
Безбедносне информације
- Држите руке, широку одећу, косу и накит даље од отвора за улазак папира.
- Не дозволите деци или кућним љубимцима да буду близу дробилице.
- Unplug the shredder when not in use or before cleaning/maintenance.
- Не сеците металне предмете, лепљиве етикете или мокар папир.
- Operate the shredder on a flat, stable surface.
- Do not attempt to repair the shredder yourself. Contact qualified service personnel.
Сетуп
Распакивање
Пажљиво извадите сецкалицу из амбалаже. Сачувајте амбалажу за будући транспорт или складиштење.
Пласман
Place the shredder on a level, stable surface near a power outlet. Ensure adequate ventilation around the unit.
Повер Цоннецтион
Укључите кабл за напајање у стандардну електричну утичницу.
Waste Bin Installation
Ensure the 15-liter waste bin is correctly inserted into the shredder unit. The shredder will not operate if the bin is not properly seated.
Image: The Rexel Auto+ 60X Cross-Cut Paper Shredder with its 15-liter waste bin partially open, revealing shredded paper. This illustrates the shredder's design and waste collection system.
Упутство за употребу
Поверинг Он
Locate the power switch or control panel on the shredder. Switch the shredder to the "On" or "Auto" position. The shredder is now ready for use.
Automatic Feed Operation
- Open the automatic feed tray.
- Stack up to 60 sheets of paper (80 gsm) neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
- Close the automatic feed tray. The shredder will automatically detect the paper and begin shredding.
- The shredder will stop once all paper in the tray has been processed.
Ручно увлачење
- For single sheets, staples, paper clips, or credit cards, use the manual feed slot.
- Insert up to 6 sheets of paper (80 gsm) or one credit card/stapled document into the manual feed slot.
- The shredder will activate and process the item.
Continuous Operation and Cooling
The shredder is designed for occasional use. It can operate continuously for approximately 4 minutes. After this period, it will automatically enter a cooling down phase to prevent overheating. Allow the shredder to cool for the recommended time before resuming operation.
Пражњење канте за отпад
When the waste bin is full, the shredder may stop operating. Pull out the 15-liter waste bin and dispose of the shredded material. Reinsert the bin securely to resume operation.
Manual Reverse Function
In case of a paper jam, switch the shredder to the "Reverse" position. This will help clear the jam by moving the paper backward. Once cleared, switch back to "Auto" or "On".
Одржавање
Чишћење
- Увек искључите дробилицу из струје пре чишћења.
- Обришите спољашњост сецкалице меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Regularly empty the waste bin to prevent overfilling and potential jams.
Oiling the Shredder (Recommended)
To maintain optimal performance and extend the life of your shredder, it is recommended to oil the cutting blades periodically, especially after emptying the waste bin 2-3 times or if you notice a decrease in performance or increased noise.
- Apply shredder oil (specifically designed for paper shredders) across the paper entry slot.
- Run a few sheets of paper through the manual feed to distribute the oil.
- Alternatively, you can use an oiled sheet (a sheet of paper with shredder oil applied to it) and feed it through the manual slot.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Шредер се не укључује. | Нема струје. | Проверите прикључак кабла за напајање и зидну утичницу. |
| Шредер се зауставља током рада. | Прегревање. | Allow the shredder to cool down for 20-30 minutes. |
| Шредер се зауставља током рада. | Waste bin full or incorrectly inserted. | Empty the waste bin and ensure it is securely reinserted. |
| Застој папира. | Too much paper inserted or paper is crumpled. | Пребаците се на "Reverse" to clear the jam. Reduce the number of sheets for automatic or manual feed. |
| Shredder is noisy or slow. | Сечива захтевају подмазивање. | Oil the shredder blades as described in the Maintenance section. |
Спецификације
- Бренд: Рекел
- Модел: Auto+ 60X (2103060)
- Тип уситњавања: Цросс-Цут
- Ниво безбедности: P3 (4x45mm particles)
- Automatic Feed Capacity: Up to 60 sheets (80 gsm)
- Капацитет ручног увлачења: Up to 6 sheets (80 gsm)
- комадићи: Папир, спајалице, спајалице, кредитне картице
- Капацитет канте за отпад: 15 литара
- Непрекидно време рада: Отприлике 4 минута
- Време хлађења: Varies (allow 20-30 minutes after overheating)
- Ниво буке: Испод 60 дБ
- Извор напајања: Електрични кабл
- Материјал: Пластика
- Тежина артикла: 7.7 килограма
- Боја: Црно
- Произвођач: Аццо
Гаранција и подршка
Information regarding specific warranty terms and support contacts is not available in this manual. Please refer to the documentation included with your purchase or visit the official Rexel website for detailed warranty information and customer support options.
For service or technical assistance, please contact your local Rexel dealer or authorized service center.