Konstsmide Parma 7235-600 Outdoor Wall Light

Увод

Thank you for choosing the Konstsmide Parma 7235-600 Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

The Konstsmide Parma 7235-600 is an elegant outdoor wall light constructed from lacquered dark green aluminum with transparent acrylic glass. It features an integrated motion sensor for enhanced security and convenience. Designed for outdoor use, this fixture is rated IP44, providing protection against solid objects larger than 1mm and splashing water from any direction.

Image: The Konstsmide Parma 7235-600 outdoor wall light, showcasing its dark green aluminum body, clear glass shade, and integrated motion sensor. Icons indicate its IP44 rating and E27 bulb compatibility.

Безбедносна упутства

• електрична безбедност: Installation must be carried out by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before commencing any installation, maintenance, or repair work.
• Волtage: Уверите се да је напајање волtage matches the fixture's requirements (230 Volts).
• Тип сијалице: Use only incandescent bulbs with an E27 base, up to a maximum of 75 Watts. Do not exceed the maximum wattagе специфицирано.
• Монтажа: The fixture is designed for wall mounting. Ensure the mounting surface is suitable and can support the weight of the light (approximately 1.54 kg).
• ИП оцена: This product is IP44 rated, meaning it is protected against splashing water. However, it is not suitable for submersion. Ensure all connections are properly sealed to maintain the IP rating.
• топлота: Light bulbs can become very hot. Allow the bulb to cool completely before touching or replacing it.
• Чишћење: Do not use abrasive cleaners or solvents. Refer to the Maintenance section for proper cleaning procedures.

Садржај пакета

Please check that all components are present and undamaged before installation.

• Konstsmide Parma 7235-600 Outdoor Wall Light fixture (1 unit)
• Прибор за монтажу (шрафови, зидни типлови)
• Упутство за употребу (овај документ)
• Напомена: Сијалица није укључена и мора се купити засебно.

Подешавање и инсталација

Потребни алати: Одвијач, бушилица, алати за одвајање жице, вол.tagе-тестер, оловка, метарска трака.

1. Припрема:
   • Turn off the main power supply at the circuit breaker before starting installation.
   • Распакујте уређај и проверите да ли има оштећења.
2. Marking Mounting Points:

   Hold the fixture's mounting plate against the desired wall location. Use a pencil to mark the drilling points for the mounting screws.

   

   Image: Dimensions diagram for the Konstsmide Parma 7235-600 outdoor wall light. The diagram illustrates the fixture's height as 48 cm and its width as 24.6 cm, providing essential measurements for installation planning.

3. Бушење и монтажа:
   • Drill holes at the marked points. Insert appropriate wall plugs if necessary.
   • Причврстите монтажну плочу на зид помоћу приложених вијака.
4. Електрични прикључак:
   • Connect the household wiring to the fixture's terminals. Ensure correct polarity (Live, Neutral, Earth).
   • Уверите се да су сви спојеви чврсти и правилно изоловани.
   • Carefully tuck the wires into the mounting box.
5. Причвршћивање причвршћивача:

   Attach the main light fixture body to the mounting plate, ensuring it is securely fastened and sealed to maintain the IP44 rating.

   

   Image: The Konstsmide Parma 7235-600 outdoor wall light mounted on a textured grey wall, showcasing its appearance when illuminated in an outdoor setting. The light casts a warm glow, highlighting the fixture's design.

6. Инсталирање сијалице:
   • Carefully screw an E27 incandescent bulb (max 75W) into the lamp држач.
   • Reattach any glass or protective covers securely.
7. Коначна провера:

   Once installation is complete, restore power at the circuit breaker and test the light fixture.

Упутство за употребу

Функционалност сензора покрета

The Konstsmide Parma 7235-600 is equipped with an integrated motion sensor (PIR sensor) that detects movement within its range and activates the light.

Image: A detailed close-up of the motion sensor unit positioned at the bottom of the Konstsmide Parma 7235-600 outdoor wall light. This sensor is responsible for detecting movement and activating the light.

• Опсег детекције: The motion sensor has a detection range of up to 8 meters and a detection angle of 180 degrees.
• Трајање осветљења: The light will remain on for a duration adjustable between 5 seconds and 8 minutes after motion is detected.
• Подешавања: The motion sensor typically has adjustable settings for sensitivity (detection range) and time delay (illumination duration). These adjustment dials are usually located on the sensor unit itself. Refer to the markings on the sensor for specific adjustments.
• Разматрање пласмана: For optimal performance, ensure the motion sensor is not obstructed and is positioned to cover the desired detection area. Avoid placing it near heat sources or areas with constant movement (e.g., busy roads) that could trigger false activations.

Manual Override (if applicable)

Some motion sensor lights allow for a manual override to keep the light on continuously. This is typically achieved by quickly switching the light switch OFF and ON twice. Consult a qualified electrician if you require this functionality and it is not clearly indicated on the product or its packaging.

Одржавање

• Чишћење:
  • Увек искључите напајање пре чишћења.
  • Clean the fixture regularly with a soft, damp тканина.
  • Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or acrylic glass.
  • Gently wipe the motion sensor lens to ensure clear detection.
• Замена сијалице:
  • Ensure the power is off and the bulb has cooled completely.
  • Carefully remove the protective glass cover (if applicable).
  • Unscrew the old E27 bulb and replace it with a new E27 incandescent bulb (max 75W).
  • Reattach the glass cover securely.
• инспекција: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.

Решавање проблема

If you are unable to resolve an issue after following these troubleshooting steps, please contact Konstsmide customer support or a qualified electrician.

Спецификације

• Модел: 7235-600
• Бренд: Констсмиде
• Димензије (Д к Ш к В): 29 x 24 x 48 цм (приближно 11.4 x 9.4 x 18.9 инча)
• Тежина: 1.54 кг (приближно 3.4 фунти)
• Материјал: Lacquered Aluminum, Acrylic Glass
• Боја: Dark Green (body), Transparent (head)
• Волtage: 230 Волтс
• Мак Ватtage: 75 Ваттс
• База сијалице: Е27
• Тип сијалице: Incandescent (recommended)
• ИП оцена: ИП44 (заштићено од прскања воде)
• Посебна карактеристика: Integrated Motion Sensor (PIR)
• Опсег сензора покрета: До 8 метара
• Motion Sensor Angle: 180 степени
• Motion Sensor Duration: Подесиво од 5 секунди до 8 минута
• Класа енергетске ефикасности: A++ (for compatible bulbs)
• Тип монтаже: Валл Моунт
• Земља порекла: Сведен
• Произвођач: Gnosoe Konstsmide GmbH

Гаранција и подршка

Specific warranty information for the Konstsmide Parma 7235-600 is not provided in this manual. Please refer to your purchase documentation or the manufacturer's official webсајт за детаље о гаранцији и условима.

For technical support, spare parts, or further assistance, please contact Konstsmide customer service or the retailer from whom you purchased the product.

Произвођач: Gnosoe Konstsmide GmbH

Webсајт: www.konstsmide.com