Упутство за употребу бесконтактног инфрацрвеног термометра CEM DT-8806H

1. Производ је готовview

The CEM DT-8806H is a precise, non-contact infrared thermometer designed for quick and accurate temperature measurements. It is suitable for both body temperature screening and measuring the temperature of objects and surfaces. This device incorporates advanced technology and a sensitive sensor to ensure reliable readings.

Слика 1: Предња страна view of the CEM DT-8806H Contactless Infrared Thermometer, showing the display and measurement button.

Кључне карактеристике:

• Clinical and Hospital Quality: Certified according to ISO 13485, CE, FCC, ROHS, and FDA, complying with EN 60601-1.2006+ A12:2014, EN 60601-1-2:2015.
• Висока тачност: Provides accurate measurements within 0.2 °C (for 36-39 °C range) in 0.5 seconds.
• Contactless Measurement: Operates at a distance of 5-15 cm, ensuring hygienic use.
• Дигитални ЛЦД екран: Clear display for easy reading, even in low light conditions.
• Уштеда енергије: Features automatic power-off after 7 seconds of inactivity.
• Мултифункционални: Capable of measuring body, ear, forehead, ambient, object, food, and liquid temperatures.
• Функција меморије: Stores up to 32 measurement data points for temperature history tracking.

2. Подешавање

2.1. Инсталација батерије

The CEM DT-8806H thermometer requires batteries for operation. A battery is included with the product.

1. Пронађите поклопац одељка за батерије на дршци термометра.
2. Померите или отворите поклопац према индикатору.
3. Insert the batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Добро затворите поклопац одељка за батерије.

Напомена: Always use the specified battery type and dispose of old batteries responsibly.

2.2. Прво укључивање

After installing the batteries, the thermometer is ready for use.

1. Press the measurement trigger button to power on the device.
2. The LCD display will illuminate and show the last measurement or enter standby mode.

3. Упутство за употребу

The DT-8806H offers two primary measurement modes: Body mode and Surface mode.

Слика 2: Страна view of the thermometer, highlighting the mode switch for Body and Surface measurements.

3.1. Пребацивање режима мерења

To switch between Body and Surface measurement modes, locate the mode switch on the side of the thermometer.

• Померите прекидач на "Body" position for human body temperature measurements.
• Померите прекидач на "Surface" position for measuring the temperature of objects, liquids, or ambient air.

3.2. Measuring Body Temperature (Body Mode)

1. Уверите се да је термометар унутра "Body" режим.
2. Point the thermometer at the center of the forehead, maintaining a distance of 5-15 cm (2-6 inches).
3. Press the measurement trigger button.
4. The temperature reading will be displayed on the LCD screen within 0.5 seconds.
5. The thermometer will automatically store the reading in its memory.

Важно: For consistent readings, ensure the measurement distance is maintained. If a person has just entered from outdoors, wait approximately 10 minutes for their body temperature to stabilize before measuring.

3.3. Measuring Object/Surface Temperature (Surface Mode)

1. Уверите се да је термометар унутра "Surface" режим.
2. Point the thermometer at the object or surface you wish to measure.
3. Press the measurement trigger button.
4. Очитавање температуре биће приказано на ЛЦД екрану.

This mode is suitable for measuring temperatures of milk, bath water, room air, food, and other non-living objects.

3.4. Функција меморије

The thermometer automatically stores the last 32 temperature measurements. To recall past readings, refer to the device's specific button functions (usually a "MEM" or "LOG" button, though not explicitly detailed in input, common for such devices).

4. Одржавање

4.1. Чишћење термометра

To ensure accurate readings and hygienic use, regularly clean your thermometer.

• Обришите тело термометра меком крпомamp тканина.
• For the sensor lens, use a cotton swab lightly moistened with alcohol. Clean gently to avoid scratching.
• Не урањајте термометар у воду или било коју другу течност.
• Немојте користити абразивна средства за чишћење или раствараче.

4.2. Складиштење

Store the thermometer in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it out of reach of children.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your CEM DT-8806H thermometer.

5.1. Inconsistent Measurements

проблем: Measurements are always different when taken in quick succession.

Могући узроци и решења:

• Natural Skin Temperature Changes: Human skin temperature can fluctuate.
• Measurement Distance Variation: Ensure a consistent distance of 5-15 cm from the forehead.
• Air Temperature Changes: Significant changes in ambient air temperature can affect readings.
• Environmental Acclimatization: If a person has just come indoors from a different temperature environment, wait approximately 10 minutes for their body temperature to stabilize before measuring.
• Alternative Measurement Sites: For comparison or if forehead readings are consistently problematic, try measuring behind the ear, in the mouth, or under the armpit with a standard clinical thermometer (if applicable for comparison, though this is a non-contact device).

5.2. Incorrect Temperature Readings (e.g., always 95°F / 35°C)

проблем: The thermometer consistently displays an incorrect or fixed temperature, such as 95°F (35°C).

Possible Cause & Solution:

• Incorrect Measurement Mode: Ensure the thermometer is set to the correct mode for your intended measurement.
  • For human body temperature, the mode switch must be set to "Body".
  • For object or liquid temperatures (e.g., milk, bath water), the mode switch must be set to "Surface".

6. Спецификације

7. Гаранција и подршка

7.1. Информације о гаранцији

Please refer to the warranty card included with your product packaging for detailed warranty terms and conditions. Typically, CEM products come with a manufacturer's warranty covering defects in materials and workmanship from the date of purchase.

7.2. Корисничка подршка

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact CEM customer support. Contact information can usually be found on the product packaging, the official CEM webсајт или страницу за подршку продавца.

Напомена: Always provide your product model number (DT-8806H) and purchase details when contacting support.