TEC TC-450

TEC TC-450 Mobile Phono Preamp Упутство за употребу

Model: TC-450 | Brand: TEC

Увод

The TEC TC-450 is a versatile mobile phono preamplifier designed to enhance your audio experience with turntables. It features a 70dB signal-to-noise ratio and a maximum distortion of 0.05%, ensuring clear and accurate sound reproduction. This unit offers flexible power options, operating on a single 9-volt battery for portability or via the included AC power adapter for continuous use. Its compact size and durable metal construction provide excellent shielding against noise, making it ideal for both home and on-the-go listening or recording.

TEC TC-450 Mobile Phono Preamp with AC Adapter

слика: The TEC TC-450 Mobile Phono Preamp unit shown alongside its included AC power adapter. The preamp is a compact, dark gray rectangular box with a power switch on the front panel.

Безбедносне информације

  • Прочитајте сва упутства пре употребе уређаја.
  • Не излажите овај уређај киши или влази.
  • Не блокирајте отворе за вентилацију. Инсталирајте у складу са упутствима произвођача.
  • Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
  • Користите само додатке/прибор које је навео произвођач.
  • Искључите овај апарат из струје током олуја са грмљавином или када га не користите дуже време.
  • Упућивање свих сервиса квалификованом сервисном особљу. Сервисирање је потребно ако је апарат на било који начин оштећен.

Садржај пакета

Молимо вас да проверите пакет за следеће ставке:

  • TEC TC-450 Mobile Phono Preamp Јединица
  • AC Power Adaptor (universal)
  • РЦА кабл
  • Miniplug Adaptor

Производ је завршенview

Предња плоча

The front panel of the TC-450 features a simple power switch to turn the unit ON or OFF.

Реар Панел

The rear panel provides all necessary audio input and output connections, as well as the power input.

Rear panel of TEC TC-450 Phono Preamp

слика: Позади view of the TEC TC-450 Phono Preamp, showing the input and output RCA jacks, ground terminal, and DC12V power input. The inputs are labeled "PHONO (MM)" and outputs "Amp/Receiver".

  • PHONO (MM) Input: RCA jacks for connecting your turntable.
  • OUTPUT (Amp/Receiver): RCA jacks for connecting to your amplifier or receiver's auxiliary input.
  • Уземљени терминал: For connecting the ground wire from your turntable to reduce hum.
  • Улазно напајање DC12V: For connecting the included AC power adapter.

Сетуп

1. Напајање јединице

The TC-450 can be powered by either a 9-volt battery or the included AC power adapter.

  • Рад батерије:
    1. Пронађите одељак за батерију на дну уређаја.
    2. Unscrew the two screws to open the compartment.
    3. Insert one 9-volt battery (not included), ensuring correct polarity.
    4. Close the compartment and secure with the screws.
  • Рад наизменичног напајања:
    1. Connect the included AC power adapter to the DC12V input on the rear panel of the TC-450.
    2. Укључите адаптер за наизменичну струју у стандардну зидну утичницу.
    AC Power Adapter for TEC TC-450

    слика: The included AC power adapter, featuring a standard two-prong plug and a barrel connector for the preamp.

2. Аудио везе

Follow these steps to connect your turntable to your amplifier or receiver:

  1. Повежите RCA излазне каблове са вашег грамофона на PHONO (MM) Input jacks on the rear panel of the TC-450. Ensure left and right channels are correctly matched (red for right, white/black for left).
  2. Connect the included RCA cable from the OUTPUT (Amp/Receiver) jacks on the rear panel of the TC-450 to an available auxiliary (AUX) input on your amplifier or receiver. Do not connect to a "Phono" input on your receiver, as this will result in over-amplification and distortion.
  3. If your turntable has a ground wire, connect it to the Гроунд Терминал on the rear panel of the TC-450. This helps to minimize hum and noise.
Connection diagram for TEC TC-450 Phono Preamp

слика: A diagram illustrating the connection of a turntable to the TEC TC-450 Phono Preamp, and then from the preamp то ан amplifier/receiver's auxiliary input. It also shows the optional DC12V adapter and 9V battery power options, and the ground wire connection.

Упутство за употребу

  1. Ensure all connections are secure as described in the "Setup" section.
  2. Укључите свој amplifier or receiver and select the input source to which the TC-450 is connected (e.g., AUX, CD, LINE IN).
  3. Flip the power switch on the front panel of the TC-450 to the ON положај.
  4. Start playing your record on the turntable. Adjust the volume on your amplifier or receiver to your desired listening level.
  5. When finished, flip the power switch on the TC-450 to the ОФФ position and turn off your other audio equipment.

The TC-450 applies RIAA equalization, which is essential for accurate playback of vinyl records, ensuring a flat frequency response from 20Hz to 20,000Hz with a tolerance of +/- 0.5dB.

Одржавање

  • Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Не користите течна средства за чишћење или аеросоле.
  • Замена батерије: If using battery power and the sound becomes weak or distorted, replace the 9-volt battery as described in the "Setup" section.
  • Складиштење: If the unit will not be used for an extended period, remove the 9-volt battery to prevent leakage. Store in a cool, dry place.

Решавање проблема

ПроблемМогући узрокРешење
Нема звука или је звук веома тих.
  • Јединица није укључена.
  • Изабран је погрешан унос ampлифиер/рецеивер.
  • Каблови нису правилно повезани.
  • Weak or dead 9V battery (if applicable).
  • Connected to "Phono" input on receiver instead of "AUX".
  • Уверите се да је прекидач за напајање УКЉУЧЕН.
  • Select the correct input (e.g., AUX, CD, LINE IN) on your ampлифиер/рецеивер.
  • Check all RCA cable connections.
  • Replace 9V battery or use AC adapter.
  • Connect to a non-phono input (e.g., AUX).
Зујање или брујање.
  • Ground wire not connected.
  • Лабаве кабловске везе.
  • Сметње од других електронских уређаја.
  • Connect the turntable's ground wire to the TC-450's ground terminal.
  • Ensure all RCA cables are securely connected.
  • Move the unit away from other electronic devices or power cables.
Изобличен звук.
  • Weak 9V battery.
  • Connected to "Phono" input on receiver.
  • Replace 9V battery or use AC adapter.
  • Connect to a non-phono input (e.g., AUX).

Спецификације

  • Модел: ТЦ-КСНУМКС
  • Однос сигнал-шум (S/N): >70дБ
  • Maximum Distortion: 0.05%
  • RIAA Frequency Response: 20Хз-20,000Хз +/- 0.5дБ
  • Напајање: 9V battery (not included) or DC12V AC adapter (included)
  • џакови: Gold-plated RCA
  • Casing: Black anodized metal
  • Димензије (пакет): 6 к 4 к 3 инча (приближно)
  • Тежина артикла: 1.45 фунте (приближно)
  • Сертификати: ЦЕ сертификован

Гаранција и подршка

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. For technical support or service inquiries, please contact the manufacturer or your point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.