Упутство за употребу механичког недељног програматора Chacon 54005

1. Увод

The Chacon 54005 Mechanical Weekly Programmer is designed to automate the operation of electrical appliances by switching them on and off at pre-set times throughout the week. This device helps manage power consumption and provides convenience for various household or office applications.

2. Важне информације о безбедности

• Пажљиво прочитајте сва упутства пре употребе.
• Овај уређај је само за унутрашњу употребу.
• Do not exceed the maximum load capacity of 3500W.
• Do not immerse the programmer in water or expose it to moisture.
• Чувати ван домашаја деце.
• Do not disassemble or attempt to repair the device. Contact qualified personnel for service.
• Ensure the appliance connected to the programmer is switched off before plugging it in or unplugging it.

3. Садржај пакета

• 1 x Chacon 54005 Mechanical Weekly Programmer

4. Производ је готовview

The Chacon 54005 features a rotating dial for weekly programming, a manual override switch, and a standard electrical socket.

• Programming Dial: A large rotating dial with segments representing 2-hour intervals for each day of the week.
• Segments/Pins: Small, push-down segments around the dial used to set ON/OFF periods.
• Прекидач за ручно преклапање: Located on the side, this switch allows you to bypass the timer settings.
• утичница: The outlet where you plug in the appliance to be controlled.
• утикач: Connects the programmer to a wall outlet.

5. Подешавање

1. Подесите тренутно време: Rotate the programming dial clockwise until the current day and time align with the indicator arrow (usually a small triangle or line on the programmer's body).
2. Прикључак: Insert the programmer into a standard wall electrical socket.

6. Упутство за употребу

1. Program ON/OFF Periods:
   • Each segment on the dial represents a 2-hour interval.
   • To set an appliance to turn ON, push the corresponding segments down for the desired time period.
   • To set an appliance to remain OFF, leave the corresponding segments in the up position.
   • You can set between 1 and 42 ON/OFF cycles per week.
2. Повежите уређај: Plug the appliance you wish to control into the socket on the front of the programmer. Ensure the appliance's own power switch is in the ON position.
3. Use Manual Override Switch: The side switch allows you to manually control the power output, overriding the programmed settings. Use this for continuous power or to keep the appliance off regardless of the timer.

Напомена: The programmer operates on 2-hour intervals. For precise timing, consider the cumulative effect of these intervals.

7. Одржавање

• To clean the programmer, wipe it with a dry, soft cloth.
• Не користите течна средства за чишћење или абразивне материјале.
• Уверите се да је уређај искључен пре чишћења.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact CHACON customer service directly. Specific warranty terms may vary by region and retailer.

11. Видео снимци производа

Тренутно нису доступни званични видео снимци производа од продавца за уграђивање.