Cherub WST-520GB

Cherub WST-520GB Auto Guitar/Bass Tuner User Manual

Model: WST-520GB | Brand: Cherub

1. Производ је готовview

The Cherub WST-520GB is an automatic tuner designed for guitars and basses. It features a clear display, LED indicators for tuning status, and multiple input options for accurate instrument tuning, making it suitable for both electric and acoustic instruments.

2. Садржај пакета

  • Cherub WST-520GB Tuner
  • 2 к ААА батерије
  • Кориснички приручник (овај документ)

3. Кључне карактеристике

  • Automatic tuning method for ease of use.
  • Built-in microphone for tuning acoustic instruments.
  • 1/4-inch input jack for connecting electric instruments.
  • LED indicators clearly show flat, in-tune, and sharp status.
  • Supports chromatic tuning mode for versatile instrument compatibility.

4. Контроле и индикатори

Cherub WST-520GB Auto Guitar/Bass Tuner showing its display, control buttons, microphone, and input/output jacks.

Слика 1: Cherub WST-520GB Tuner Front Panel

  • Екран: Features a needle-style meter indicating pitch deviation from -50 (flat) to +50 (sharp) cents.
  • ЛЕД индикатори: Three lights above the display. The left red LED indicates flat, the right red LED indicates sharp, and the center green LED indicates in-tune.
  • МИЦ: Integrated microphone for detecting the sound of acoustic instruments.
  • ITEM / FLAT Button: Used to cycle through instrument modes (e.g., Guitar, Bass, Chromatic) and to activate or adjust flat tuning settings.
  • ON---CALIB / OFF Button: Powers the unit on or off. May also be used for calibration functions.
  • ИНПУТ Јацк: A 1/4-inch (6.35mm) jack for connecting electric instruments directly.
  • ИЗЛАЗНИ прикључак: A 1/4-inch (6.35mm) jack for passing the instrument's signal through to an ampлифиер или другу аудио опрему.

5. Подешавање

5.1. Инсталација батерије

The Cherub WST-520GB operates on two AAA batteries. Locate the battery compartment on the back of the unit. Open the cover, insert the batteries ensuring correct polarity (+/-) as marked, and then securely close the cover.

5.2. Connecting Your Instrument

For Electric Instruments: Connect a standard 1/4-inch instrument cable from your instrument's output jack to the ИНПУТ jack on the tuner. If you wish to send the tuned signal to an amplifier, connect another 1/4-inch cable from the tuner's ОУТПУТ џак за твој ampдопринос корисника за спасавање.

For Acoustic Instruments: No cable connection is required. The tuner's built-in microphone will detect the sound of your instrument.

6. Упутство за употребу

6.1. Укључивање/искључивање

Притисните и држите ON---CALIB / OFF button for approximately 2 seconds to power the tuner on or off.

6.2. Selecting Tuning Mode

After powering on, the tuner will display its current mode. Press the ITEM / FLAT button repeatedly to cycle through the available instrument modes, such as Guitar, Bass, or Chromatic. Select the mode appropriate for your instrument.

6.3. Tuning Your Instrument

  1. Play a single note on your instrument. Ensure the note sustains long enough for the tuner to detect it.
  2. Observe the display and LED indicators:
    • If the left red LED illuminates and the needle points to the left (towards -50), the note is flat.
    • If the right red LED illuminates and the needle points to the right (towards +50), the note is sharp.
    • If the green LED illuminates and the needle is centered (at 0), the note is in tune.
  3. Adjust your instrument's tuning pegs until the green LED illuminates and the needle is precisely centered on the display.

6.4. Using the Flat Function

If you need to tune your instrument to a lower pitch (e.g., half-step down), press the ITEM / FLAT button briefly after selecting your instrument mode. The display will indicate the activated flat setting (e.g., 'b' for one half-step flat). Press again to cycle through flat settings or return to standard tuning.

7. Одржавање

  • Чишћење: Use a soft, dry cloth to clean the tuner's exterior. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
  • Замена батерије: Replace the AAA batteries when the display dims, the LEDs become faint, or the unit fails to power on. If the tuner will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
  • Складиштење: Store the tuner in a dry environment, away from extreme temperatures, high humidity, and direct sunlight. Protect it from physical shocks or drops.

КСНУМКС. Решавање проблема

8.1. Tuner does not power on.

  • Проверите постављање батерија. Уверите се да су батерије уметнуте са исправним поларитетом.
  • Replace batteries with fresh ones, as they may be depleted.

8.2. Tuner is not detecting sound.

  • For electric instruments: Ensure the instrument cable is securely connected to the ИНПУТ jack. Verify that the cable and instrument are functioning correctly. Increase the instrument's volume output.
  • For acoustic instruments: Ensure the instrument is played loudly enough for the built-in microphone (MIC) to detect the sound. Try moving the tuner closer to the sound source.

8.3. Tuning seems inaccurate.

  • Verify that the correct instrument mode (Guitar, Bass, Chromatic) is selected.
  • Minimize ambient noise that might interfere with the microphone's detection.
  • If using the input jack, ensure the cable connection is stable and free from interference.

9. Спецификације

  • Модел: WST-520GB
  • Режим подешавања: Chromatic, Guitar, Bass
  • Улаз: 1/4-inch (6.35mm) mono jack
  • Излаз: 1/4-inch (6.35mm) mono jack
  • Снага: 2 к ААА батерије (укључене)
  • Димензије: 4.1 к 3.7 к 1 инча (10.4 к 9.4 к 2.5 цм)
  • Тежина: 3.2 унце (90.7 грама)
  • Материјал: Пластика

10. Гаранција и подршка

For detailed warranty information, technical assistance, or customer support, please refer to the manufacturer's official webсајт или директно контактирајте њихову службу за кориснике. Препоручује се да сачувате рачун као доказ о куповини за евентуалне рекламације у вези са гаранцијом.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.