RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Производ је готовview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Кључне карактеристике:

• Снага: ЛЕД диода од 39 вати
• Температура боје: 5100К Цоол Вхите
• Животни век: 100,000 hours based on LM-80 tests
• ЛЕД: Three multi-chip 13-watt high-performance LEDs
• Оптика: NEMA type 7H x 6V with Air-flow technology heatsink
• Рефлектор: Semi-specular anodized aluminum
• Заптивке: Високотемпературни силикон
• завршити: Bronze chip and fade-resistant polyester powder coat
• Волtage: 120-volt to 277-volt operation

2. Безбедносне информације

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• електрична безбедност: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• уземљење: Уређај мора бити правилно уземљен како би се спречио потенцијални струјни удар.
• Монтажа: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Радна температура: Do not operate the fixture outside its specified temperature range.
• ЛЕД: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Инсталација

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Потребни алати:

• Одвијач (Прстоглави и равни)
• Жице стриптизета
• Клијешта
• Drill (if mounting surface requires pilot holes)
• Подесиви кључ

Опције монтаже:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Слика 2: Прample of a Slipfitter Mount (optional accessory)

Кораци инсталације:

1. Искључите напајање: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagе тестер.
2. Припремите монтажну површину: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Жичне везе:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Монтажа: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Подесите циљ: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Врати снагу: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Операција

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Стандардна операција:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Слика 3: Прample of a Photocell (optional accessory)

5. Одржавање

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Чишћење:

• Екстеријер: Периодично чистите спољашњост уређаја меком,amp крпом да бисте уклонили прљавштину, прашину и остатке. Не користите абразивна средства за чишћење или раствараче.
• Објектив: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

инспекција:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

КСНУМКС. Решавање проблема

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Спецификације

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Гаранција и подршка

Гаранција произвођача:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Двогодишња гаранција произвођача од датума куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби и сервисирању.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Корисничка подршка:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webсајт за актуелне контакт податке.