Билштајн 20-070748
Bilstein 46mm Monotube Shock Absorber User Manual
Модел: КСНУМКС-КСНУМКС
Производ је завршенview
The Bilstein (20-070748) 46mm Monotube Shock Absorber is a high-performance suspension component designed for specific vehicle applications. This monotube design provides consistent, fade-free performance and improved handling characteristics. It is engineered to offer superior damping control and durability for a wide range of driving conditions.
Image: The Bilstein 46mm Monotube Shock Absorber, featuring its distinctive green body, a silver mounting ring, and a beige bump stop at the upper end. This component is designed for front vehicle suspension.
Подешавање и инсталација
Installation of the Bilstein 46mm Monotube Shock Absorber requires specialized tools and automotive knowledge. It is highly recommended that installation be performed by a certified professional mechanic to ensure proper fitment, safety, and performance.
Провере пре инсталације:
- Verify that the shock absorber model (20-070748) is compatible with your vehicle's make, model, and year. This shock absorber is compatible with: 2002 Jaguar S-Type, 2003 Jaguar S-Type, 2004 Jaguar S-Type, 2005 Jaguar S-Type.
- Прегледајте амортизер да ли има знакова оштећења приликом транспорта.
- Ensure all necessary mounting hardware is available and in good condition.
Општи кораци инсталације (за детаље погледајте сервисни приручник возила):
- Безбедно подигните и подуприте возило на равној површини користећи одговарајуће дизалице.
- Remove the wheel from the corner where the shock absorber will be replaced.
- Carefully disconnect any components attached to the existing shock absorber (e.g., brake lines, ABS sensors).
- Unbolt and remove the old shock absorber. Note the orientation of all components.
- Install the new Bilstein shock absorber, ensuring all bolts are torqued to the manufacturer's specifications.
- Reattach any disconnected components.
- Вратите точак и спустите возило.
- Извршите поравнање точкова након уградње како бисте осигурали правилно управљање возилом и хабање гума.
Важно: Always refer to your vehicle's specific service manual for detailed, step-by-step installation instructions and torque specifications. Failure to follow proper installation procedures can lead to vehicle damage or personal injury.
Оперативне карактеристике
Once installed, the Bilstein 46mm Monotube Shock Absorber operates continuously as part of your vehicle's suspension system. Its monotube design provides superior heat dissipation and consistent damping force, which translates to improved road holding, enhanced steering precision, and a more controlled ride compared to conventional twin-tube designs.
- Доследан учинак: The monotube design prevents aeration of the oil, ensuring consistent damping performance even under extreme conditions.
- Improved Handling: Provides a firmer, more controlled ride, reducing body roll and enhancing vehicle stability during cornering and braking.
- Трајност: Constructed with high-quality materials and a robust design for long-term reliability.
Одржавање
Bilstein shock absorbers are designed to be maintenance-free under normal operating conditions. However, regular inspection of your vehicle's suspension components is recommended as part of routine vehicle maintenance.
Препоручене тачке инспекције:
- Визуелни преглед: Periodically check the shock absorbers for any signs of oil leaks, dents, or damage to the body or mounting points.
- Хардвер за монтажу: Уверите се да су сви монтажни вијци безбедно причвршћени и без корозије.
- чауре: Inspect rubber bushings for cracks, wear, or deterioration. Worn bushings can lead to noise and reduced performance.
- Провера перформанси: If you notice a significant change in ride quality, excessive bouncing, or unusual noises from the suspension, have the shock absorbers inspected by a qualified mechanic.
Do not attempt to disassemble or repair the shock absorber. These units are sealed and contain high-pressure gas. Tampering with the unit can result in injury and will void the warranty.
Решавање проблема
While Bilstein shock absorbers are highly reliable, certain symptoms may indicate an issue with the suspension system. Below are common issues and potential causes:
| Симптом | Могући узрок | Решење |
|---|---|---|
| Excessive Bouncing or "Floating" Ride | Worn or failing shock absorber. | Inspect and replace shock absorber if necessary. |
| Vehicle Nose Dives During Braking | Worn front shock absorbers. | Inspect and replace front shock absorbers. |
| Excessive Body Roll During Cornering | Worn shock absorbers or other suspension components. | Inspect all suspension components; replace worn parts. |
| Clunking or Rattling Noises from Suspension | Loose mounting hardware, worn bushings, or damaged shock absorber. | Check all fasteners for tightness, inspect bushings, and replace any damaged components. |
| Oil Leaks on Shock Absorber Body | Квар унутрашњег заптивача. | Shock absorber requires replacement. |
If you experience any of these symptoms, it is advisable to have your vehicle's suspension system inspected by a qualified mechanic.
Спецификације
- Бренд: Билштајн
- Назив модела: Bilstein (20-070748) 46mm Monotube Shock Absorber
- Број дела: 20-070748
- Положај ауто дела: Фронт
- Стил: Adjustable, Monotube
- Тип сервиса возила: Works with 2002-2005 Jaguar S-Type
- Спољна завршна обрада: Паинтед
- Материјал: Plastic (Note: This might refer to internal components or packaging, the main body is metal)
- Боја: Black (Note: Product image shows green, this might be a generic spec or for a different variant)
- Величина: 46 Millimeter (Piston Diameter)
- Тежина артикла: 3 килограма
- Тежина пакета: 454 грама
- Димензије паковања артикла (Д к Ш к В): 2.99 к 2.99 к 2.01 инча
- Укључене компоненте: Bilstein (20-070748) 46mm Monotube Shock Absorber
- Произвођач: Билштајн
- УПЦ: 651860571362
- ASIN: B009FU4RXM
- Датум прве доступности: 24. септембра 2012. године
Информације о гаранцији
Bilstein products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary depending on the product and region. For detailed warranty information, please refer to the official Bilstein webсајту или контактирајте њихову корисничку подршку.
Generally, the warranty covers defects in materials and workmanship under normal use and service. It typically does not cover damage resulting from improper installation, misuse, abuse, accidents, or unauthorized modifications.
To make a warranty claim, you will typically need proof of purchase and may be required to return the product for inspection.
Корисничка подршка
For further assistance, technical support, or inquiries regarding the Bilstein (20-070748) 46mm Monotube Shock Absorber, please contact Bilstein customer service directly.
- Службено Webсајт: www.bilstein.com (Молимо вас да проверите регионалне websites for specific contact details)
- Контакт информације: Refer to the "Contact Us" section on the official Bilstein website for phone numbers, email addresses, or online inquiry forms.
When contacting support, please have your product model number (20-070748) and purchase information readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.