1. Увод
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Legrand CX³ Power Contactor, model 412505. Please read this manual thoroughly before using the product and retain it for future reference.
The Legrand CX³ Power Contactor 412505 is designed for controlling electrical circuits, conforming to standard NF EN 61095. It is compatible with up to 25 A comb-shaped bus bars.
2. Безбедносне информације
УПОЗОРЕЊЕ: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the contactor or connected circuits.
- Увек се придржавајте локалних и националних електричних прописа.
- Ensure the power supply matches the contactor's specifications.
- Do not operate the contactor if it appears damaged.
- Носите одговарајућу личну заштитну опрему (ЛЗО).
3. Опис и карактеристике производа
The Legrand CX³ Power Contactor 412505 is a compact and reliable device for switching electrical loads. Key features include:
- Модел: 412505
- Цоил Волtage: 24В
- Rated Current (I Max): 25 Amps
- Ратед Волtage: 250V (Bipolar)
- Тип контакта: 2 Normally Open (2F)
- Број модула: 1
- Монтажа: Монтажа на ДИН шину
- Оцена заштите: ИП20
- Материјал: Kunststoff (housing), Copper (contacts)
4. Подешавање и инсталација
The contactor is designed for DIN rail mounting. Follow these steps for installation:
- Искључивање струје: Ensure all power to the circuit is disconnected at the main breaker. Verify with a voltagе тестер.
- Монтажа: Clip the contactor onto a standard DIN rail. Ensure it is securely fastened.
- Wiring (Power Circuit):
- Connect the incoming power lines to the main terminals (e.g., L1, L2).
- Connect the load lines to the outgoing terminals (e.g., T1, T2).
- Ensure all connections are tight using the clamp тип конектора.
- Wiring (Control Circuit):
- Connect the 24V control voltage to the coil terminals (A1, A2).
- The control method is remote, typically via a switch or control system.
- Верификација: Пре него што поново укључите напајање, двапут проверите исправност и безбедност свих ожичења.
5. Упутство за употребу
The Legrand CX³ Power Contactor 412505 operates in an ON-OFF mode, controlled by its 24V coil.
- Активација: Apply 24V DC or AC (depending on coil type, typically AC for contactors unless specified) to the coil terminals (A1 and A2). This will energize the coil, closing the main contacts and allowing power to flow to the connected load.
- Деактивација: Remove the 24V control voltage from the coil terminals. The coil will de-energize, opening the main contacts and disconnecting power from the load.
- Индикатор: Some models may include a visual indicator to show the contactor's state (energized/de-energized).
Напомена: The contactor is designed for remote control. There is no manual control mechanism on this specific model (as per "Coil without Manual Control").
6. Одржавање
The Legrand CX³ Power Contactor 412505 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance and safety.
- Визуелни преглед: Regularly inspect the contactor for any signs of physical damage, discoloration, or loose connections.
- Затегнутост терминала: Periodically check that all terminal connections are secure. Loose connections can lead to overheating and failure.
- Чишћење: If necessary, gently clean the exterior of the contactor with a dry, lint-free cloth. Do not use solvents or abrasive cleaners. Ensure power is disconnected before cleaning.
- Радно окружење: Обезбедите да радно окружење остане у наведеним опсезима температуре и влажности како бисте спречили прерано хабање.
If any issues are observed, disconnect power and consult a qualified electrician.
КСНУМКС. Решавање проблема
Before troubleshooting, ensure all power is disconnected. Only qualified personnel should perform troubleshooting and repairs.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Contactor does not energize when control voltagе се примењује. |
|
|
| Contactor energizes but load does not receive power. |
|
|
| Contactor hums loudly or overheats. |
|
|
8. Спецификације
| Параметар | Валуе |
|---|---|
| Број модела | 412505 |
| Бранд | Легранд |
| Оперативни режим | ОН-ОФФ |
| Current Rating (I Max) | 25 Amps |
| Оператинг Волtagе (главни) | 250 Volts (Bipolar) |
| Оператинг Волtage (Coil) | 24 Волтс |
| Тип контакта | 2 Normally Open (2F) |
| Тип конектора | Clamp |
| Тип прекидача | Цонтацтор |
| Терминал Типе | Бладе |
| Материјал кућишта | Кунстстофф |
| Контакт материјал | Бакар |
| Цирцуит Типе | 2-ваи |
| Тип монтаже | Монтажа на ДИН шину |
| Ацтуатор Типе | Клип |
| Број позиција | 1 |
| Контролни метод | Ремоте |
| Цоннецтивити Протоцол | Wi-Fi (Note: Refers to system integration, not inherent Wi-Fi in contactor) |
| Ватtagе (Максимално оптерећење) | 600 вати |
| Оцена међународне заштите | ИП20 |
| Тежина артикла | 0.13 килограма |
9. Гаранција и подршка
За информације о гаранцији и техничку подршку, обратите се званичном Legrand-у. webсајт или контактирајте локалног Legrand дистрибутера. Сачувајте рачун као доказ о куповини.