EWT Clima 903 TLS Fan Heater Instruction Manual

Важне информације о безбедности

Please read this instruction manual carefully before using the EWT Clima 903 TLS fan heater. Keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Увек се уверите да је грејач постављен на стабилну, равну површину.
• Do not cover the heater or obstruct its air inlets/outlets.
• Keep flammable materials (curtains, furniture, paper) at least 1 meter (3 feet) away from the heater.
• Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. The unit has IP21 drip protection, but it is not fully waterproof.
• Искључите грејач из струје када га не користите или пре чишћења.
• Не користите грејач са оштећеним каблом или утикачем.
• Овај уређај није намењен за употребу од стране особа (укључујући децу) са смањеним физичким, чулним или менталним способностима, или недостатком искуства и знања, осим ако им је дат надзор или упутства о употреби уређаја од стране особе одговорне за њихову безбедност.

Упутства за подешавање

1. Распакивање: Carefully remove the EWT Clima 903 TLS fan heater from its packaging. Retain the packaging for storage or in case of return.
2. Пласман: Place the heater on a firm, level, and heat-resistant surface. Ensure there is adequate clearance around the heater for proper air circulation. Avoid placing it directly under a power outlet. The robust design with metal front and back makes it suitable for environments like garages or workshops.
3. Прикључак за напајање: Ensure the power switch is in the "OFF" position. Plug the power cord into a standard 230 Volt AC electrical outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the heater's power consumption (up to 3000W).

Слика 1: Предња страна view of the EWT Clima 903 TLS fan heater, showing the protective grille and EWT branding.

Слика 2: Страна view of the EWT Clima 903 TLS fan heater, highlighting the integrated carrying handle for portability.

Упутство за употребу

The EWT Clima 903 TLS fan heater features a control knob for power settings and a thermostat for temperature regulation.

1. Укључивање/искључивање и избор режима:
   • Turn the main control knob to select the desired operating mode:
     • Ventilation (Fan Only): За циркулацију ваздуха без загревања.
     • 1500 В: За умерено загревање.
     • 3000 В: For rapid and powerful heating.
   • The LED indicator will illuminate when the heater is operating.
2. Контрола термостата:
   • Rotate the thermostat knob to set the desired room temperature. The heater will cycle on and off to maintain this temperature.
   • For continuous heating, set the thermostat to its maximum position.
   • Функција антифриза: If the thermostat is set to the snowflake symbol (*), the heater will automatically turn on if the ambient temperature drops below approximately 5°C (41°F) to prevent freezing. This function remains active even after a power cut.
3. Заштита од прегревања: The heater is equipped with an automatic overheat protection system. If the heater becomes too hot, it will automatically shut off. If this occurs, unplug the heater, allow it to cool down for at least 10-15 minutes, and check for any obstructions to the air inlets or outlets. Once cooled and obstructions removed, plug it back in and resume operation.
4. Искључивање: To turn off the heater, rotate the main control knob to the "OFF" position and unplug it from the power outlet.

Figure 3: Close-up of the control knob on the side of the heater, used for selecting power modes and adjusting the thermostat.

Слика 4: Детаљно view of the multi-function knob, showing settings for fan-only, 1500W, 3000W, and the thermostat with antifreeze symbol.

Одржавање

Regular cleaning and proper storage will ensure the longevity and efficient operation of your EWT Clima 903 TLS fan heater.

• Чишћење:
  • Увек искључите грејач из струје и оставите га да се потпуно охлади пре чишћења.
  • Обришите спољашње површине меком, дamp крпа. Не користите абразивна средства за чишћење, раствараче или јаке хемикалије, јер могу оштетити завршну обраду.
  • Use a vacuum cleaner with a brush attachment to gently remove dust from the air inlets and outlets. Do not insert any objects into the openings.
• Складиштење:
  • If storing the heater for an extended period, clean it thoroughly and place it back in its original packaging or a protective cover.
  • Чувати на хладном и сувом месту, далеко од директне сунчеве светлости и екстремних температура.

Решавање проблема за

Пре него што контактирате корисничку подршку, погледајте следеће уобичајене проблеме и решења:

Спецификације производа

Figure 5: Dimensional diagram of the EWT Clima 903 TLS fan heater, indicating its height, width, and depth.

Информације о гаранцији

Specific warranty terms and conditions may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding the warranty period and coverage for your EWT Clima 903 TLS fan heater.

Корисничка подршка

If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the retailer where you purchased the product or visit the official EWT website for customer support contact details. When contacting support, please have your model number (Clima 903 TLS) and purchase information readily available.