FAAC TM433DS-2

FAAC TM433DS-2 Remote Control User Manual

1. Производ је готовview

The FAAC TM433DS-2 is a compact and ergonomic remote control designed for operating gate and garage door systems. It transmits on a frequency of 433.92 MHz and features two distinct buttons for controlling different functions. This remote control is known for its straightforward programming process, which typically involves internal switches, and comes ready for use with included batteries.

FAAC TM433DS-2 Remote Control front view

Слика 1.1: Предња страна view of the FAAC TM433DS-2 remote control, showing its two control buttons.

Кључне карактеристике:

  • Радна фреквенција: КСНУМКС МХз
  • Број дугмади: 2
  • Programming Type: Internal Dip Switches
  • Battery Type: 12V (23A)
  • Compact Dimensions: Approximately 5 x 7 x 2 mm

2. Подешавање и програмирање

Setting up your FAAC TM433DS-2 remote control involves installing the battery and configuring the internal dip switches to match your existing receiver or remote. No special tools are typically required for this process.

2.1 Инсталација батерије

  1. Open the Remote Control Casing: Carefully open the remote control. This usually involves gently prying apart the two halves of the casing, often at a seam or notch.
  2. Уметните батерију: Locate the battery compartment. Insert one 12V (23A) battery, ensuring the polarity (+/-) matches the indicators inside the compartment.
  3. Затворите Цasing: Carefully reassemble the remote control, ensuring the casing snaps securely into place.
FAAC TM433DS-2 Remote Control with back cover removed, showing battery compartment and dip switches

Image 2.1: Illustration of the remote control's internal components, including the battery compartment and dip switches (example image, actual internal layout may vary).

2.2 Programming the Dip Switches

The FAAC TM433DS-2 uses internal dip switches for programming. This method requires you to match the switch settings of your new remote to an existing working remote or directly to the receiver unit.

  1. Access Dip Switches: After opening the remote control (as described in Battery Installation), locate the small row of numbered switches inside.
  2. Match Settings:
    • From an Existing Remote: If you have a working FAAC TM433DS-2 remote, open it and observe the ON/OFF positions of its dip switches. Set the switches on your new remote to exactly match these positions.
    • From the Receiver Unit: If you are programming directly from the receiver, open the receiver unit (refer to your gate/garage opener manual for location) and note its dip switch settings. Configure your new remote's switches to match the receiver's settings.
  3. Тестирајте даљински: Once the switches are set, close the remote control casing and test its functionality with your gate or garage door system.

Напомена: Ensure the receiver unit is powered off before opening it to adjust dip switches, if applicable. Always refer to your specific gate or garage opener manual for detailed instructions on accessing and setting receiver dip switches.

3. Управљање даљинским управљачем

The FAAC TM433DS-2 remote control is designed for simple operation with its two control buttons.

  1. Функционалност дугмета: Each button on the remote control can be assigned to a specific function of your gate or garage door system (e.g., open/close, pedestrian access). The exact function of each button depends on how your receiver unit is configured.
  2. Activating a Function: To activate a function, press and hold the corresponding button for approximately 1-2 seconds until the gate or garage door begins to respond.
  3. Радни опсег: The maximum effective operating range for the remote control is approximately 10 meters (33 feet). Performance may vary depending on environmental factors, obstructions, and interference.

For optimal performance, ensure a clear line of sight between the remote control and the receiver whenever possible.

4. Одржавање

Proper maintenance ensures the longevity and reliable operation of your FAAC TM433DS-2 remote control.

4.1 Замена батерије

When the remote control's range decreases significantly or it becomes unresponsive, it is likely time to replace the battery. Follow the steps outlined in Section 2.1 "Battery Installation" to replace the 12V (23A) battery.

4.2 Чишћење и складиштење

  • Чишћење: Use a soft, dry cloth to clean the exterior of the remote control. Avoid using abrasive cleaners or solvents, as these can damage the casing and electronic components.
  • Складиштење: Store the remote control in a dry place, away from extreme temperatures, direct sunlight, and high humidity. Avoid dropping the remote control or subjecting it to strong impacts.

КСНУМКС. Решавање проблема

If your FAAC TM433DS-2 remote control is not functioning as expected, consider the following troubleshooting steps:

Проблем Могући узрок Решење
Remote control does not work or has reduced range. Празан или празна батерија. Replace the 12V (23A) battery (refer to Section 2.1).
Remote control does not activate the gate/garage door. Incorrect dip switch settings. Verify that the internal dip switches match your existing remote or receiver (refer to Section 2.2).
Gate/garage door responds intermittently or slowly. Out of range, signal interference, or weak battery. Move closer to the receiver. Ensure there are no major obstructions. Replace battery if necessary. Try holding the button for a slightly longer duration.
Remote control casinг је оштећен. Физички утицај. If functionality is affected, consider replacing the remote control.

6. Спецификације

Феатуре Детаљ
Бранд ФААЦ
Назив модела TM433DS-2
Радна фреквенција 433.92 МХз
Број дугмади 2
Programming Type Switch (Dip Switches)
Тип батерије 12В (23А)
Димензије (приближно) 5 к 7 к 2 мм
Максимални радни опсег 10 метара (33 стопа)
Технологија повезивања Радио фреквенција
GTIN / UPC 793518941469

7. Гаранција и подршка

The FAAC TM433DS-2 remote control typically comes with a 1 година гаранције од датума куповине, покривајући производне недостатке. Молимо вас да сачувате доказ о куповини за потребе гаранције.

For technical support or further assistance, please contact your FAAC product retailer or an authorized FAAC service center. Refer to the FAAC official webсајт за контакт информације и додатне ресурсе.

© 2026 FAAC. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.