Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Увод

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Општа безбедносна упутства

Увек се придржавајте следећих мера безбедности када користите електричне алате:

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Неред или тамна места могу изазвати несреће. Немојте користити електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Утикачи електричних алата морају одговарати утичници. Никада не модификујте утикач на било који начин. Избегавајте контакт тела са уземљеним површинама као што су цеви, радијатори, шпорети и фрижидери.
• Лична безбедност: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.
• Услуга: Нека ваш електрични алат сервисира квалификована особа за поправку користећи само идентичне резервне делове. Ово ће осигурати очување сигурности електричног алата.

3. Компоненте производа

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• СДС Плус Цхуцк
• Аукилиари Хандле
• Заустављање дубине
• Mode Selector Switch (Drill, Hammer Drill, Chisel)
• Прекидач за смер ротације (напред/назад)
• On/Off Trigger with Speed Control
• Дугме за закључавање (за континуирани рад)

Слика 1: Завршеноview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Слика 3: Крупни план view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Подешавање

4.1 Причвршћивање помоћне ручке

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Installing the Depth Stop

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Упутство за употребу

5.1 Избор режима

The mode selector switch allows you to choose the appropriate operating mode:

• Бушење (само ротација): For drilling in wood, metal, or plastics.
• Ударно бушење (ротација са ударом): For drilling in concrete and masonry.
• Длетовање (само ударно): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Укључивање/искључивање и контрола брзине

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Смер ротације

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your rotary hammer.

• Чишћење: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp тканина. Немојте користити груба средства за чишћење или раствараче.
• Одржавање стезне главе: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Инспекција кабла: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Складиштење: Store the tool in its original case in a dry, secure place, out of reach of children.

КСНУМКС. Решавање проблема

8. Техничке спецификације

9. Информације о гаранцији

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webсајту.

10. Подршка

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official webсајт за додатну помоћ и ресурсе.

Службено Webсајт: www.einhell.com