1. Увод
Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.
Слика 1: Завршеноview of the Einhell TH-MS 2513 T Miter and Table Saw.
2. Безбедносна упутства
Увек се придржавајте следећих мера предострожности како бисте спречили струјни удар, пожар и озбиљне повреде:
- Прочитајте цео приручник: Understand all instructions and warnings before operating the saw.
- Wear personal protective equipment (PPE): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
- Одржавајте радни простор чистим и добро осветљеним: Претрпане или мрачне области изазивају несреће.
- Не радите у експлозивним атмосферама: Не користите електричне алате у присуству запаљивих течности, гасова или прашине.
- Осигурајте радни предмет: Увек клamp or hold the workpiece firmly to prevent movement during cutting.
- Користите исправно сечиво: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
- Одржавајте правилан положај и равнотежу: Не претерујте.
- Искључите напајање: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
- Keep guards in place: Never operate the saw without all guards properly installed and functioning.
- Избегавајте случајно покретање: Уверите се да је прекидач у положају искључено пре него што укључите алат.
3. Подешавање
3.1 Распакивање и преглед
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.
3.2 Скупштина
The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.
3.3 Saw Blade Installation
- Искључите напајање: Уверите се да је тестера искључена из извора напајања.
- Open blade guard: Carefully lift or open the blade guard to access the blade arbor.
- Install blade: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
- Secure blade: Fasten the blade with the provided washer and arbor nut, tightening securely.
- Close guard: Вратите заштитник сечива у првобитни положај.
Figure 2: Saw blade and protective guard in miter saw configuration.
4. Упутство за употребу
4.1 Општи рад
Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.
4.2 Miter Saw Function
The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.
- Капацитет сечења на 90°: 130 к 75 мм
- Капацитет сечења на 45°: 120 к 50 мм
- Cutting Capacity at 2 x 45° (Compound Miter): 70 к 35 мм
Figure 3: Adjusting the miter angle for precise cuts.
4.3 Table Saw Function
To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.
Figure 4: Adjusting the cutting height for table saw operation.
4.4 Усисавање прашине
The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.
Figure 5: Dust extraction port for connecting a vacuum system.
5. Одржавање
Редовно одржавање осигурава дуготрајност и безбедан рад ваше тестере.
- Чишћење: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Инспекција сечива: Редовно проверавајте да ли је лист тестере оштар, да ли има пукотина или да ли недостају зупци. Одмах замените тупе или оштећене листове.
- Guard Functionality: Ensure all guards move freely and return to their protective positions.
- подмазивање: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
- Кабл за напајање: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.
КСНУМКС. Решавање проблема
Овај одељак се бави уобичајеним проблемима на које можете наићи. За проблеме који нису наведени овде, контактирајте корисничку подршку.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Тестера се не покреће | Нема напајања; неисправан прекидач; активирано термално преоптерећење. | Check power connection; test switch; allow motor to cool down. |
| Лош квалитет реза / Сагоревање дрвета | Dull or dirty blade; incorrect blade for material; feeding too fast. | Replace or clean blade; use appropriate blade; reduce feed rate. |
| Прекомерне вибрације | Loose blade; damaged blade; unstable mounting. | Tighten blade nut; replace blade; ensure saw is securely mounted. |
| Усисавање прашине је неефикасно | Dust port clogged; dust extractor not powerful enough; hose disconnected. | Clear dust port; use a more powerful extractor; check hose connections. |
7. Техничке спецификације
| Спецификација | Валуе |
|---|---|
| Број модела | 4300345 |
| Повер Инпут | 1800 В |
| Брзина без оптерећења | 4500 мин-1 |
| Димензије сечива тестере | Ø 250 x Ø 30 x 2.8 mm |
| Број зуба | 36 |
| Подешавање угла косе | -45° / 0° / +45° |
| Cutting Width at 90° | 130 к 75 мм |
| Cutting Width at 45° | 120 к 50 мм |
| Cutting Width at 2 x 45° | 70 к 35 мм |
| Table Saw Surface | 416 к 352 мм |
| Table Saw Cutting Height | 0 – 40 мм |
| Волtage | 230 В |
| Тежина артикла | 14 кг |
| Димензије производа (Д к Ш к В) | 54.5 к 47 к 37.5 цм |
| Препоручена површина | Дрво, метал, пластика |
8. Гаранција и подршка
8.1 Гаранција
This Einhell product comes with a 2 година гаранције from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.
8.2 Корисничка подршка
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell webсајту или преко вашег локалног продавца.
Webсајт: www.einhell.com
Please have your model number (4300345) and serial number (if applicable) ready when contacting support.