Mayer Swivel Chair User Manual

1. Увод

Thank you for choosing the Mayer Swivel Chair. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new office chair. Please read this manual carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Безбедносне информације

• Уверите се да су све компоненте добро причвршћене пре употребе.
• Немојте стајати на столици.
• Do not use the chair if any parts are damaged or missing.
• Maximum recommended load capacity is 110 кгНе прекорачујте ову тежину.
• Keep children away from the chair during assembly. Small parts may be a choking hazard.
• Користите столицу на равној површини да бисте спречили превртање.

3. Садржај пакета

Молимо вас да проверите да ли су сви делови присутни пре почетка монтаже. Ако неки делови недостају или су оштећени, контактирајте корисничку подршку.

• Seat cushion (1)
• Backrest with mesh (1)
• Наслон за главу (1)
• Наслони за руке (2)
• Star base (1)
• Котачи (5)
• Gas lift cylinder (1)
• Mechanism plate (1)
• Hardware pack (screws, washers, Allen key)

4. Упутство за монтажу

Assembly is required for this product. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Причврстите точкове на базу: Уметните пет точкова у рупе на крају сваке ноге звезде. Чврсто притисните док не кликну на своје место.
2. Уметните гасни лифт: Поставите цилиндар за подизање гаса у средишњу рупу склопљене звезде.
3. Причврстите механизам на седиште: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen key. Ensure the front of the mechanism faces the front of the seat.
4. Причврстите наслоне за руке: Secure the armrests to the sides of the seat cushion using the provided screws. Do not overtighten initially.
5. Причврстите наслон: Connect the backrest to the mechanism plate or seat frame using the designated screws. Adjust the armrests if necessary to align with the backrest attachment points, then tighten all armrest screws.
6. Причврстите наслон за главу: Slide the headrest into the slot at the top of the backrest. Adjust its height and inclination as desired.
7. Повежите седиште са гасом за подизање: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered. Apply downward pressure to secure it.

Figure 4.1: Fully assembled Mayer Swivel Chair, showcasing its ergonomic design and components.

5. Упутство за употребу (Подешавања)

Your Mayer Swivel Chair offers several adjustment options to customize your seating experience for optimal comfort and support.

• Подешавање висине седишта: Locate the lever on the right side beneath the seat. Pull the lever up to raise the seat. To lower, pull the lever up while seated. Release the lever at the desired height. The seat height range is approximately 47-56 cm.
• Backrest Tilt and Lock: The chair features a synchronous mechanism. Use the lever on the left side beneath the seat to adjust the backrest tilt. Pull the lever out to allow the backrest to recline freely. Push the lever in to lock the backrest in an upright or reclined position.
• Individual Weight Adjustment: A knob located beneath the seat (usually at the front or center) allows you to adjust the tension of the backrest tilt. Turn clockwise to increase tension (for heavier users) and counter-clockwise to decrease tension (for lighter users).
• Подешавање дубине седишта: Some models feature a seat depth adjustment. Look for a lever or button on the side of the seat. Activate it to slide the seat forward or backward, then release to lock.
• Подешавање наслона за руке: The armrests are height and depth adjustable. Locate the buttons or levers on the armrests. Press or lift to adjust the height, and slide the armrest pad forward or backward for depth adjustment. Release to lock.
• Подешавање наслона за главу: The headrest can be adjusted for both height and inclination. Gently pull or push the headrest to move it up or down, and tilt it to find your preferred angle.
• Подешавање лумбалне потпоре: The chair includes height-adjustable lumbar support. Locate the mechanism on the backrest and slide it up or down to position the support correctly for your lower back.

6. Одржавање и њега

Proper care will extend the life and appearance of your Mayer Swivel Chair.

• Чишћење: Обришите огласомamp cloth. For stubborn stains on fabric, use a mild upholstery cleaner according to its instructions. Avoid harsh chemicals or abrasive cleaners.
• инспекција: Периодично проверавајте све завртње и вијке да бисте били сигурни да су затегнути. По потреби их поново затегните.
• Котачићи: Држите точкове чистим од длака и остатака како бисте осигурали глатко котрљање.
• Избегавајте директну сунчеву светлост: Prolonged exposure to direct sunlight can cause fading of fabric and plastic components.

КСНУМКС. Решавање проблема

8. Спецификације

• Модел: Swivel Chair B00C193C8U
• Бренд: Mayer
• Материјал: Plastic (back), Fabric (seat), Aluminum (frame/base)
• Боја: Црно
• Тежина артикла: 35 кг
• Максимално препоручено оптерећење: 110 кг
• Опсег висине седишта: 47-56 цм
• Карактеристике: Adjustable Height, Rolling, Adjustable Headrest, Adjustable Lumbar Support, Swivel Armrests, Synchronous Mechanism
• Потребна монтажа: Да
• Упутства за негу: Обрисати

9. Гаранција и подршка

За информације о гаранцији или техничку подршку, обратите се продавцу или директно произвођачу. Сачувајте рачун као доказ о куповини.

Manufacturer: Mayer