Antari HZ-500

Antari HZ-500 Haze Machine Instruction Manual

Model: HZ-500 | Brand: Antari

1. Увод

This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Antari HZ-500 Haze Machine. Please read this manual thoroughly before operating the unit to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Безбедносне информације

Adherence to the following safety precautions is crucial for preventing electrical shock, fire, or personal injury.

  • електрична безбедност: Уверите се да је уређај повезан са уземљеном утичницом са исправним напономtage as specified on the product label. Disconnect power before performing any maintenance or refilling fluid.
  • Употреба течности: Use only Antari HZ-500 series haze fluid. Using other fluids may damage the machine and void the warranty. Do not ingest haze fluid. Keep out of reach of children.
  • Пласман: Position the machine on a stable, level surface. Ensure adequate ventilation around the unit. Do not block air vents. Maintain a safe distance from flammable materials.
  • Операција: Do not operate the machine if it is damaged or malfunctioning. Avoid direct exposure to the haze output at close range. Do not modify the unit.
  • температура: The machine generates heat during operation. Avoid touching hot surfaces.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

  • Антари ХЗ-500 Машина за маглу
  • Повер Цорд
  • Кориснички приручник (овај документ)
  • (Optional) Remote Control or DMX Cable (if purchased separately or included in specific bundles)

4. Производ је готовview

The Antari HZ-500 is a professional haze machine designed for continuous output and quiet operation. It features a durable flight case design for portability and protection.

Antari HZ-500 Haze Machine in open flight case

Слика 4.1: Antari HZ-500 Haze Machine with its flight case lid open, revealing the main unit and control panel. The robust construction is visible, designed for touring and professional use.

4.1 кључне компоненте

  • Haze Output Nozzle: Located on the top surface, where haze is emitted.
  • Резервоар течности: Internal compartment for haze fluid.
  • Fluid Level Indicator: A clear window to monitor fluid levels.
  • Контролна табла: Features a digital display and buttons for settings adjustment.
  • Улазна снага: IEC connector for the power cord.
  • ДМКС улаз/излаз: XLR connectors for DMX control.
  • Порт за даљинско управљање: For connecting an optional wired remote.

5. Подешавање

5.1 Распакивање и постављање

  1. Carefully remove the HZ-500 from its packaging.
  2. Place the machine on a flat, stable, and heat-resistant surface.
  3. Уверите се да око уређаја има најмање 50 цм (20 инча) слободног простора за правилну вентилацију.
  4. Open the flight case lid to access the machine's controls and fluid reservoir.

5.2 Filling the Fluid Reservoir

  1. Locate the fluid reservoir cap on the top of the unit.
  2. Unscrew the cap and carefully pour Antari HZ-500 series haze fluid into the reservoir.
  3. Monitor the fluid level using the transparent indicator. Do not overfill. The maximum fluid level is clearly marked.
  4. Securely replace the reservoir cap.
Close-up of Antari HZ-500 fluid level indicator

Слика 5.1: Detail of the fluid level indicator on the Antari HZ-500, showing the 'MAX FLUID LEVEL' mark and a 'Never Overfill' warning. This helps users prevent spillage and ensure correct operation.

5.3 Прикључак за напајање

  1. Connect the provided power cord to the power input socket on the rear of the HZ-500.
  2. Plug the other end of the power cord into a suitable grounded electrical outlet.
  3. Уверите се да је прекидач за напајање у положају ИСКЉУЧЕНО пре него што га повежете са струјом.

5.4 Control Connection (Optional)

  • ДМКС контрола: Connect a DMX cable from your DMX controller to the DMX IN port on the HZ-500. If linking multiple DMX devices, connect from DMX OUT to the next device's DMX IN.
  • Жичани даљински: Connect the optional wired remote control to the designated remote control port.

6. Упутство за употребу

6.1 Powering On and Warm-up

  1. Окрените прекидач за напајање у положај ОН.
  2. The machine will begin its warm-up cycle. The digital display will indicate the status.
  3. Once warmed up (typically a few minutes), the machine is ready for operation.

6.2 Рад на контролној табли

The HZ-500 features a user-friendly control panel for adjusting haze output and settings.

Close-up of Antari HZ-500 control panel with digital display and buttons

Слика 6.1: Детаљно view of the Antari HZ-500's control panel, featuring a digital display, function buttons, timer, volume, and interval controls, along with a direct haze mode switch. The power input and DMX ports are also visible.

  • Дугме ФУНКЦИЈА: Navigates through various settings menus.
  • Дугме ТАЈМЕР: Activates and adjusts the haze output timer.
  • VOLUME Button: Controls the intensity or volume of haze output.
  • INTERVAL Button: Sets the delay between haze bursts when using the timer function.
  • ON/OFF Switch (Direct Haze Mode): Provides immediate haze output when switched ON, bypassing timer or DMX settings.

6.3 Haze Output

Once the machine is warmed up, you can initiate haze output using the control panel, an optional remote, or DMX control.

Antari HZ-500 Haze Machine emitting haze

Слика 6.2: The Antari HZ-500 Haze Machine actively producing a fine, even haze, demonstrating its operational output.

6.4 Искључивање

  1. Turn off the haze output.
  2. Flip the main power switch to the OFF position.
  3. Искључите кабл за напајање из електричне утичнице.
  4. Оставите јединицу да се потпуно охлади пре него што преместите или одложите.

7. Одржавање

Regular maintenance ensures the longevity and optimal performance of your HZ-500.

  • Чишћење: Periodically wipe the exterior of the machine with a soft, dry cloth. Ensure air vents are free from dust and debris.
  • Fluid System: If the machine will be stored for an extended period, it is recommended to drain the fluid reservoir and run a small amount of distilled water through the system to prevent clogs. Consult Antari's official guidelines for detailed cleaning procedures.
  • Складиштење: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir cap is securely fastened.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter. For problems not listed here, contact Antari customer support.

ПроблемМогући узрокРешење
Нема излаза маглеNo power; fluid reservoir empty; clogged nozzle; machine not warmed up.Check power connection; refill fluid; clean nozzle (refer to maintenance); allow sufficient warm-up time.
Weak haze outputLow fluid level; incorrect fluid type; partial clog; low output setting.Refill fluid; ensure correct Antari HZ-500 fluid is used; clean nozzle; increase output setting on control panel.
Machine not responding to DMXНетачна DMX адреса; неисправан DMX кабл; проблем са DMX контролером.Verify DMX address settings on HZ-500; test DMX cable; check DMX controller functionality.

9. Спецификације

Technical specifications for the Antari HZ-500 Haze Machine:

  • Модел: ХЗ-КСНУМКС
  • Тежина артикла: 74.8 фунти
  • Димензије пакета: 22.83 к 17.91 к 17.72 инча
  • Снага: 120VAC 250V/7A (for US models, check label for other regions)
  • Тип течности: Antari HZ-500 Series Haze Fluid
  • Контрола: On-board digital control, DMX, Optional Wired Remote
  • Прво доступно: 18. октобра 2014. године

10. Гаранција и подршка

For warranty information, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or replacement parts, please contact your authorized Antari dealer or Antari customer service directly. Provide your product model number (HZ-500) and serial number when seeking support.

Antari Official Webсајт: ввв.антари.цом

© 2023 Antari. All rights reserved. Specifications are subject to change without notice.