Adcraft WB-100
Упутство за употребу бојлера са ручним пуњењем диспензера за топлу воду Adcraft WB-100
Model: WB-100
Увод
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft WB-100 Low Volume Manual Fill Hot Water Dispenser Boiler. Please read this manual thoroughly before initial use and retain it for future reference.

Слика: Фронт view of the Adcraft WB-100 Hot Water Dispenser Boiler, showcasing its stainless steel construction, water level gauge, spigot, and temperature control knob.
Важна безбедносна упутства
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances. This appliance heats water to high temperatures; exercise extreme caution.
- Прочитајте сва упутства пре употребе.
- Не додирујте вруће површине. Користите ручке или дугмад.
- Да бисте се заштитили од опасности од електричне струје, кабл, утикаче или уређај не потапајте у воду или другу течност.
- Неопходан је пажљив надзор када било који уређај користе деца или у близини деце.
- Искључите из утичнице када није у употреби и пре чишћења. Оставите да се охлади пре стављања или скидања делова и пре чишћења уређаја.
- Немојте користити ниједан уређај са оштећеним каблом или утикачем, или након што уређај поквари или је на било који начин оштећен.
- Употреба додатака које није препоручио произвођач уређаја може изазвати повреде.
- Не користите на отвореном.
- Не дозволите да кабл виси преко ивице стола или пулта, нити да додирује вруће површине.
- Не стављајте на или близу врућег гасног или електричног горионика, или у загрејану рерну.
- Увек прво прикључите утикач на уређај, а затим укључите кабл у зидну утичницу. Да бисте га искључили, окрените било коју контролу на „искључено“, а затим извуците утикач из зидне утичнице.
- Немојте користити уређај за другу употребу осим за предвиђену.
Подешавање и прва употреба
- Распакивање: Carefully remove the hot water dispenser from its packaging. Retain packaging materials for future storage or transport.
- инспекција: Inspect the unit for any signs of damage. If damaged, do not operate and contact your supplier.
- Пласман: Place the unit on a stable, level, heat-resistant surface. Ensure there is adequate clearance around the unit for ventilation. The non-slip rubber feet provide stability.
- Прво чишћење: Before first use, wash the interior of the dispenser and the lid with warm, soapy water. Rinse thoroughly and dry.
- Прикључак за напајање: Ensure the power switch is in the "OFF" position. Plug the 3-foot power cord (NEMA 5-15 plug) into a grounded 120V AC electrical outlet. The unit requires 1350W and 11.25 Amps.
Упутство за употребу
- Пуњење јединице: Remove the lid and manually fill the dispenser with clean water. Do not fill above the "MAX" fill line indicated on the interior or water level gauge. The unit has a 100-cup (6.25 gallon) capacity.
- Осигуравање поклопца: Place the lid securely back onto the dispenser.
- Укључивање: Flip the illuminated power switch to the "ON" position. The switch will light up, indicating the unit is receiving power and beginning to heat.
- Подешавање температуре: Use the variable temperature control knob located at the base of the unit to select your desired water temperature. The range is from 85°F to 220°F.
- Процес грејања: The unit will begin heating the water. The extra-large encapsulated heating element ensures fast and even heating. Monitor the water level gauge on the side of the unit.
- Испуштање топле воде: Once the desired temperature is reached, place a cup or container under the spigot. Push down the lever on the spigot to dispense hot water. Release the lever to stop the flow.
- Допуна: If the water level becomes low, turn off the unit, unplug it, and allow it to cool slightly before refilling.
- Транспорт: Use the cool-to-touch bakelite handles for safe transportation of the unit when empty or cool.

Слика: Крупни план view of the variable temperature control knob, allowing adjustment of water temperature between 85°F and 220°F.

Слика: Крупни план view of the dispensing spigot and the clear water level gauge, which allows monitoring of the water volume inside the boiler.
This hot water dispenser is suitable for preparing various hot beverages and foods, including tea, coffee, instant noodles, and soups. It can also be used to keep sauces like Au Jus or barbecue sauce warm.
Нега и одржавање
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Adcraft hot water dispenser.
- Дневно чишћење:
- Увек искључите јединицу из струје и оставите да се потпуно охлади пре чишћења.
- Испразните сву преосталу воду.
- Wash the interior and exterior stainless steel surfaces with a mild detergent and a soft cloth or sponge.
- Rinse thoroughly with clean water. Do not immerse the electrical base in water.
- Dry all surfaces completely before storing or next use.
- Уклањање каменца: Over time, mineral deposits (limescale) may build up, especially in hard water areas.
- To descale, fill the unit with a solution of equal parts white vinegar and water.
- Heat the solution to approximately 150°F (65°C) and let it stand for 30-60 minutes. Do not boil.
- Drain the solution and rinse the interior several times with fresh water to remove any vinegar residue.
- Поновите ако је потребно.
- Складиштење: Store the clean and dry unit in a cool, dry place.
Решавање проблема
Пре него што контактирате корисничку подршку, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Јединица се не загрева. | Not plugged in; power switch off; circuit breaker tripped; faulty power cord/element. | Ensure unit is plugged in and power switch is ON. Check circuit breaker. If problem persists, contact qualified service personnel. |
| Water heats too slowly. | Limescale buildup; insufficient power supply. | Perform descaling procedure. Ensure unit is connected to a dedicated 120V outlet. |
| Water leaks from spigot. | Spigot not fully closed; damaged spigot seal. | Ensure spigot lever is fully released. If leaking continues, the spigot may need replacement or repair by a qualified technician. |
| Water level gauge unclear. | Mineral deposits on gauge. | Clean the exterior of the gauge. If internal, descaling may help. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Adcraft customer support.
Спецификације производа
- Модел: ВБ-КСНУМКС
- Капацитет: 100 Cups (approximately 6.25 Gallons)
- Материјал: Конструкција од нерђајућег челика
- Снага: 120В, 1350В, 11.25 Amps
- Тип прикључка: НЕМА 5-15
- Температурни опсег: 30°C - 104°C
- Димензије (Д к Ш к В): 12.6 к 10.83 к 22.91 инча
- Тежина: 1 Pound (approximate, unit weight only)
- Сертификати: ETL Listed, ETL Sanitation, NSF
- Посебне карактеристике: Temperature Control, Water Level Indicator, Heat-resistant side handles, Illuminated power switch.
Гаранција и подршка
This Adcraft WB-100 Hot Water Dispenser Boiler is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use for a period of one year from the date of purchase.
For warranty claims, technical support, or to inquire about replacement parts, please contact Adcraft customer service. Please have your model number (WB-100) and proof of purchase available when contacting support.
Contact information for Adcraft can typically be found on their official webсајту или на паковању производа.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.