Digi-Pas DWL280PRO Waterproof IP67 Digital Torpedo Level and Protractor User Manual

1. Производ је готовview

The Digi-Pas DWL280PRO is a robust and precise digital torpedo level and protractor designed for professional use in demanding environments. It features advanced LED technology for a bright display and is built with high-impact resistant ABS plastic and thick rubber material, ensuring durability and reliability.

Кључне карактеристике укључују:

• WATERPROOF IP67 CERTIFIED: Designed to operate in water up to 1.0 meter deep.
• SHOCK & FREEZE PROOF: Withstands strong impacts and operates in extreme temperatures from -4°F to 140°F (-20°C to 60°C).
• HIGH PRECISION: Resolution of ±0.05° (at 0° & 90°) and ±0.2° for other angles.
• BRIGHT LED DISPLAY: Ensures clear visibility in various lighting conditions.
• MAGNETIC BASE & V-GROOVE: Allows secure attachment to metallic surfaces and alignment on pipes.
• MULTIPLE MEASUREMENT UNITS: Switchable display between degrees (°), slope (%), mm/M, and inch/FT.
• SMART TECHNOLOGIES: Auto-invert display when upside down and buzzer sounds at 0° or any set angle.

2. Подешавање и почетна употреба

2.1 Инсталација батерије

The DWL280PRO requires 3 AAA batteries (not included). To install or replace batteries:

1. Пронађите поклопац одељка за батерије на задњој страни уређаја.
2. Open the cover by twisting or sliding it according to the markings.
3. Уметните 3 ААА батерије, водећи рачуна о исправном поларитету (+/-) као што је назначено унутар одељка.
4. Securely close the battery compartment cover to maintain the IP67 waterproof seal.

2.2 Укључивање/искључивање

Притисните тастер црвено дугме за напајање () to turn the device on. Press and hold the same button to turn it off. The device may also feature an auto-off function to conserve battery life if left idle.

2.3 Почетна калибрација

The DWL280PRO allows for easy re-calibration by the user back to factory settings without special fixtures. Refer to the operating section for detailed calibration procedures to ensure optimal accuracy.

3. Упутство за употребу

3.1 Мерења

Place the base of the DWL280PRO firmly against the surface you wish to measure. The bright LED display will instantly show the angle or slope.

3.2 Промена мерних јединица

The DWL280PRO allows switching between different measurement units. Use the дугме за режим (often indicated by a gear or unit symbol) to cycle through degrees (°), slope (%), mm/M, and inch/FT. The current unit will be displayed on the screen.

3.3 Auto-Invert Display

For convenience when working in awkward positions, the display automatically inverts when the gauge is held upside down, ensuring the reading is always upright and easy to read.

3.4 Функција зујалице

The device features a buzzer that sounds at 0 degrees or any user-set angle, providing an audible indication of level or target angle achievement.

3.5 Magnetic Base and V-Groove

The integrated magnetic base allows the level to securely attach to metallic surfaces, freeing your hands for other tasks. The V-groove design on the base ensures stable placement and accurate measurements on cylindrical objects like pipes.

4. Одржавање

4.1 Чишћење

Due to its IP67 rating, the DWL280PRO can be cleaned with water and mild soap. Ensure the battery compartment is securely sealed before cleaning. Do not use abrasive cleaners or solvents that could damage the display or housing.

4.2 Складиштење

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.

4.3 Замена батерије

Replace batteries when the display dims or the device fails to power on. Follow the battery installation steps in Section 2.1.

КСНУМКС. Решавање проблема

5.1 Уређај се не укључује

• Проверите батерије: Ensure batteries are correctly installed with proper polarity and are not depleted. Replace with fresh AAA batteries.
• Одељак за батерије: Проверите да ли је поклопац одељка за батерије безбедно затворен.

5.2 Нетачна очитавања

• Рекалибрација: Perform a user re-calibration to factory settings. Consult the full manual (if available) or manufacturer's website for specific steps.
• Површинска стабилност: Ensure the surface the level is placed on is stable and free from vibrations.
• температура: While designed for wide temperature ranges, extreme fluctuations during measurement can affect precision. Allow the device to acclimate to the environment if moved from one extreme to another.

5.3 Проблеми са приказом

• Затамњен екран: Замените батерије.
• Без приказа: Check power and battery installation.

6. Спецификације

7. Информације о гаранцији

Digi-Pas levels are warranted to be free from defects in workmanship for a period of 18 месеци од дана куповине.

For warranty claims or further details, please refer to the official Digi-Pas webсајту или контактирајте њихову корисничку подршку.

8. Корисничка подршка

For technical assistance, product inquiries, or support, please visit the official Digi-Pas website or contact their customer service department. Always refer to your product model number (DWL280PRO) when seeking support.

Напомена: Ниједан званични видео снимак производа од продавца није био доступан за уграђивање у овај приручник.